Sentry Camera ECD3-M5528 Quick start guide

Copyright © 2009. All Rights Reserved. 1 REV110209
ECD3-M5528 2.8mm Lens
ECD3-M5536 3.6mm Lens
ECD3-M5528P 2.8mm Lens
ECD3-M5536P 3.6mm Lens
Operational Manual
High Performance Mini Dome Color Camera
// FEATURES ...
•CMOS Micron Aptina Image Sensor
•550 TV Lines
•2.8mm or 3.6mm
•External 350° pan direction rotation & 75° tilt direction
adjustment
•12V DC
// INSTALLATION ...
Step 1: Mark and drill two hole positions on wall/ceiling. Then screw
the camera to the wall/ceiling with the provided screws.
Step 2: Adjust the tilt angle screw for suitable view position.
// DIMENSIONS ...
Unit: mm
// SPECIFICATIONS ...
Model ECD3-M5528 ECD3-M5536
Image Sensor Aptina Image Sensor
Resolution 550 TV Lines
Synchronization Internal
Lens 2.8mm, F2.0 3.6mm, F2.0
Auto White Balance Auto (2500K ~ 9500K)
Electronic Shutter Auto
Aperture Auto
AGC Auto
BLC Auto (1/3 center)
Minimum Illumination 0.1 Lux
S/N Ratio > 52dB
Power 12V DC + 10%
Power Consumption 0.65W (max)
Operating
Temperature 14°F~122°F / -10°C~50°C
Storage Temperature -4°F~140°F / -20°C~60°C
Easy Adjustment External 350° pan direction rotation
75° tilt direction adjustment
Dimensions 107(Ø) x 65(H) mm
*Specifications are subject to change without notice
Please read the Manual & Cautions section
before attempting to use this product.

Copyright © 2009. All Rights Reserved. 2 REV110209
// LIST OF COMPONENTS ...
•One (1) ECD3-M5528/ECD3-M5528P or
ECD3-M5536/ECD3-M5536P Camera with video/power &
audio cable
•Two (2) Screws
•Two (2) Wall Anchors
•One (1) Manual
* For any returns, please include all components listed above with
original packaging in Resalable Condition. Absolutely No
Returns will be accepted if any component is missing/damaged or
if any cable is cut or tampered with.
// OPTIONAL VANDAL PROOF HOUSING ...
CAUTIONS ...
1. Never point the camera toward the sun
Do not expose the lens directly to the sun or to strong light as this
may damage the pick-up device.
2. Handle this camera with care
Avoid any shock or bumping of the camera. Improper handling
could damage the camera.
3. Requires a proper operating environment
This camera is designed for indoor use. The allowable temperature
range for operation of this camera is between -4°F ~ 122°F /
-10°C ~ 50°C.
4. Clean the front face or lens
It is recommended that the surface be cleaned every 3~6 months.
Cleaning should be done by using a chamois, a very fine soft cloth,
lens tissue, or cotton tipped applicator and ethanol to carefully
remove any fingerprint or dust.
5. Check the power source voltage
The power source voltage should be within the specified range.
(Camera must meet the specifications). Camera must be connected
to a surge protector at all times.
6. Objects and liquid entry
Never push objects of any kind into this camera as this may touch
dangerous voltage points of short out parts that could result in a fire
or electric shock. Never spill any kind of liquid on the video product.
7. Servicing
Do not attempt to service this video product by yourself as opening
or removing covers may expose you to dangerous voltage or other
hazards. Refer all service to qualified servicing personnel.
8. Damage requiring service
Unplug this video product from the wall outlet and refer service to
qualified servicing personnel under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
video product.
c. If the video product has been exposed to rain or water.
d. If the video product has been dropped or the cabinet has
been damaged.
e. When the video product exhibits a distinct change in
performance.
// LIMITED WARRANTY ...
This product is covered under warranty for one year from the date
of purchase. The warranty will automatically be voided if any of the
following occurs:
1. Camera sticker is removed
If the camera sticker is removed, we will not be able to confirm
any information regarding when and where the product was
purchased. We have no other way to verify the purchase record
without the serial number on the camera sticker; therefore, it
should not be removed.
2. Camera is modified in any way
If the camera is scratched, damaged, or modified in a manner not
described in this manual, the warranty will be voided
immediately. It is the customer’s responsibility to keep the
camera in good condition.
3. Video or power cable is cut
The video cable and the power cable should not be tampered
with. Cutting or modifying of the cables will result in termination of
the warranty.
ECD3‐M5528‐VD2.8mmLens
ECD3‐M5536‐VD3.6mmLens
ECD3‐M5528‐VDP2.8mmLens
ECD3‐M5536‐VDP3.6mmLens