Serato Reloop Beatmix 2 User manual

QUICK-START
GUIDE
RELOOP
BEATMIX 2

Installation and Setup
The Reloop Beatmix 2 is a class compliant USB plug and play device and
requires no further driver installation.
1. Download and install the latest version of Serato DJ Intro from http://
serato.com/dj-intro/downloads
2. Connect your Reloop Beatmix 2 to an available USB Port.
3. Open Serato DJ Intro

2
12 3 4 5 6 7 8 9 10
11121314151617181920
21
22
23
Controller

# Reloop Beatmix 2
Control
Serato DJ Function Shift Function
1 FX UNIT Adjust Slots 1-3 FX Parameters Turn to select FX for slots 1-3
2 BEATS Turn to adjust beats value for FX / Tap to the set FX tempo. To
return to AUTO mode, press and hold
3 EQ Adjust Low/Mid/High
4 GAIN Adjust channel gain
5 CUE MIX Adjusts between Cue and Master in your headphones
6 PHONES Adjusts headphone volume
7 MASTER Adjusts master volume
8LIBRARY SCROLL Scroll through currently focused area. Push to navigate forward
through open panels
9 CUE Cue selected channel in headphones Use to activate channel fader start
10 PAD MODE Alternate between different performance pad modes or split mode
11 1/2 Load track to selected deck
12 BACK Push to navigate backward through open panels
13 CROSSFADER Crossfades between the two channels
14 SAMPLER Adjusts sampler volume
15 CHANNEL FADER Adjusts channel volume
16 PLAY/PAUSE Play/Pause
17 CUE Temporary Cue Jump to start of track (more than 2 Sec elapsed)
Previous track (less than 2 sec elapsed
18 CUP Stutter Play Press to change range of pitch fader
19 SYNC Sync On Sync Off
20 SHIFT SHIFT button is used with other buttons that have shift modier functions

Performance Pads
There are multiple performance pad modes for the Reloop Beatmix 2. You
can alternate between all 3 by using the PAD MODE buttons.
Pad Mode A
In this mode pads 1-4 set and trigger HOT CUES. If you press pads 1-4
with SHIFT held you can delete the cues you have already set. Pads 5-8
set AUTO LOOPS of 1,2,4 and 8 bars from left to right. When pads 5-8 are
pressed with SHIFT they perform other looping functions. 5 performs loop on
/ off, 6 halves the loop length, 7 doubles the loop length and 8 is reloop.
Pad Mode B
In this mode pads 1-4 play samples 1-4 in the sample bank. Pads 5-8 will
stop samples 1-4 from playing. When pads 5-8 are pressed with SHIFT they
will eject the samples from each SP6 sample slot.
Pad Mode SPLIT
In this mode pads 1-4 set and trigger HOT CUES. If you press pads 1-4
with SHIFT held you can delete the cues you have already set. Pads 5-8
play samples 1-4 in the sample bank.
# Reloop Beatmix 2
Control
Serato DJ Function Shift Function
21 PITCH FADER Adjust Tempo of playing track When in Sync mode, used to disable the Pitch
Fader temporarily and change the zero position
22 PITCH Use to pitch bend playing track up or down
23 PLATTER Scratch or Jog deck Beat skip

DJ-FX
You can have up to three different effects active per virtual deck within
Serato DJ Intro with the Reloop Beatmix 2.
Reloop Beatmix
2 Control
Single FX mode Shift
FX 1 Adjust Parameter 1 & Effect
On/Off when knob is turned
Select Effect
FX 2 Adjust Parameter 3 Select Effect
FX 3 Adjust Parameter 5 Select Effect
The effect time is set using the tracks BPM value, but by applying the
Beats Multiplier you can increase or decrease the effect timing. Modify this
by using the BEATS knob on the controller. Automatic tempo requires that
the track on the deck assigned to the FX Unit has BPM information. Manual
tempo mode allows you to tap in the tempo yourself.
NOTE: To change to Manual Tempo mode, simply tap the BEATS knob
until a desired rate is established. To return to AUTO mode, click and hold
BEATS for 1 second.
Using the Tool Tips
Click on the icon to enable Tool Tips. This is located in next to the
setup button in the top right hand corner of the screen. Tool Tips provide a
handy way to learn the various features of Serato DJ Intro.
Move the mouse over a section of the screen to bring up a context sensitive
tool tip. Holding the mouse over the button with Tool Tips turned on
will show you a list of all keyboard shortcuts.
For more information about how to use Serato DJ Intro, please go to our
website www.serato.com or refer to the Serato DJ Intro Software Manual. For
more information on your controller, please refer to the hardware manual.
For further help, please contact [email protected] or go to www.serato.
com/dj-intro/support