Serato Numark Mixstream Pro + User manual

1
Quick-Start Guide
Numark
Mixstream Pro +

2
Setup
Serato software
The Numark Mixstream Pro + is a “Serato DJ Lite hardware unlocked” device, meaning it works with Serato
DJ Lite out of the box.
It is also a “paid upgrade to Serato DJ Pro device”, meaning it requires the purchase & activation of a Serato
DJ Pro license, in order to be used with Serato DJ Pro.
You can also try Serato DJ Pro, before making a purchase:
Click here to learn about buying or activating Serato DJ Pro
or
Click here to learn about trying Serato DJ Pro
Please ensure you have the latest version of Serato DJ Pro installed:
Click here to download Serato DJ Pro
Driver software
The Numark Mixstream Pro + is class compliant on macOS but does require manufacturer specic drivers
when used with Windows operating systems. Download and install the Windows driver via Numark’s
website.
Then connect your Mixstream Pro + with a USB cable to your computer, launch the latest version of Serato
DJ Pro, and follow the steps below:
1. Connect the device via USB cable to your PC, power it on, and launch Serato DJ Pro
2. Once the device has booted, swipe down from the top of the LCD display on the device, and tap SOURCE
3. Tap the computer/laptop button then tap YES when prompted to restart the player into Computer Mode
Overview
2 3 4 51
76
# MIXSTREAM PRO + CONTROL FUNCTION
1 MAIN (BALANCED) Connect audio output via XLR
2 MAIN Main audio output via RCA
3 USB Connect USB cable to computer
4 DC IN Connect included AC adapter to power source
5 POWER Press to power on / off device
6 HEADPHONES Connect headphones via 3.5mm or 6.5mm jack
7 MIC Connect microphone & adjust microphone gain

3
# MIXSTREAM PRO +
CONTROL FUNCTION SHIFT FUNCTION
1 MIX Adjust headphone between mix and headphone cue -
2 VOLUME Adjust headphone volume -
3 FILTER Turn left for low pass lter or right for high pass lter, per deck -
4 DISPLAY Shows track, library & waveform information -
5 MAIN Adjust main output volume -
6 SPEAKER Adjust built-in speaker volume -
7 JOG WHEEL Turn jog to bend pitch, or control waveform within Serato DJ
in vinyl mode
Fast track waveform scroll
8 PITCH BEND + / - Press + or - to bend pitch of playing track Toggle tempo range up (+) or
down (-)
9 TEMPO SLIDER Adjust tempo/pitch Ignore tempo/pitch adjustment
10 BUILT-IN SPEAKER Built-in speaker. Use Speaker control to adjust volume -
11 PERFORMANCE PADS
(SECTION)
SEE PERFORMANCE PADS FOR MORE INFORMATION -
12 BROWSE Turn to scroll library. Press in to toggle forward between crate
& track area
Fast Library scroll. Press in
to toggle backward between
crate & track area
13 CHANNEL CUE Toggle channel cue for monitoring -
14 FX (SECTION) Press FX Select button to load labelled FX to Slot 1, and set
depth to 60%. Pull FX lever to ON to turn on FX, or pull it to
HOLD to momentarily turn on FX. Left lever is for FX Unit 1
and right lever is for FX Unit 2.
-
Overview
1 52 63 4
7
8
9
10
11121314151617181920
21
22
23
24

4
Overview
# MIXSTREAM PRO +
CONTROL FUNCTION SHIFT FUNCTION
15 CROSSFADER Crossfade audio between channel 1-2 Crossfader start
16 CHANNEL FADER Adjust channel volume (per channel) Channel fader start
(per channel)
17 BACK Press to cycle back between crate & track area -
18 CHANNEL (SECTION) Adjust level, and adjust EQ (Treble, Mid, Bass) -
19 LOAD 1 Press to load selected track to Deck 1 (press LOAD 2 for
Deck 2)
-
20 SHIFT Shift modier, which can be held while using another control
for secondary SHIFT function
-
21 PLAY / PAUSE Toggles Play / Pause on selected deck Stutter play
22 CUE Cues from temp cue point/Set temp cue point Load previous track
23 SYNC Press to turn SYNC on (per deck) Press to turn SYNC off (per
deck)
24 SCRATCH Toggle vinyl or jog platter mode (per deck) -

5
Performance Pads
The Numark Mixstream Pro + comes with 4 performance pads, that can be used across 4 different
performance pad modes.
The 4 modes can be triggered by pressing the performance pad mode button of the same name once, and
consist of:
CUE mode: Press the CUE pad mode button to enter CUE mode. Pads 1-4 trigger Serato DJ Pro Cue
points, and if no Cue point is present on that slot/pad, pressing that pad will set a Cue point. Holding down
the SHIFT button while pressing a populated pad will delete the Cue point from the respective pad/slot.
MANUAL LOOP mode: Press the SAVED LOOP pad mode button to enter MANUAL LOOP mode. Press
pad 1 to set the Loop In point, and press it again to edit the Loop In point. Press pad 2 to set the Loop Out
point, and press it again to edit the Loop Out point. Press pad 3 to turn the Loop on or off, and press pad
4 to trigger a Reloop or Exit an active Loop.
AUTO LOOP mode: Press the AUTO LOOP pad mode button to enter Auto Loop mode. In this mode
pads 1-4 trigger an Autoloop of varying sizes. Press the same pad for a second time to exit an Auto Loop.
LOOP ROLL mode: Press the ROLL pad mode button to enter Loop Roll mode. Holding Pads 1-4
activate a loop roll of varying sizes. Release the pad to exit the Loop Roll.

6
MIDI
The MIDI feature in Serato DJ Pro provides the ability to remap Serato DJ Pro software functions to your
primary Serato controller, interface or mixer. You can also assign controls to a secondary MIDI controller to
further enhance your performance.
For more information on MIDI mapping with Serato DJ Pro click here
To remap your supported Serato device, open the SETUP screen and click the MIDI tab. If your Serato
device supports hardware remapping, it will show up in the MIDI Devices list at the top.
Select your connected device from the MIDI Devices list and make sure the “Allow Serato Hardware
Remapping” option is checked.
Once checked, the MIDI assign button at the top of the screen will become available for you to start
remapping.
You can save, edit or delete MIDI presets in the MIDI tab of the SETUP screen. Clicking ‘Restore Defaults’
will erase any custom mappings for all connected devices and revert their functions back to default.
Help
Show Tooltips
Click on the button in the upper right-hand corner of Serato DJ Pro, then to enable
tooltips. Tool tips provide a handy way to learn the various features of Serato DJ Pro.
Move the mouse over a section of the screen to bring up a context sensitive tool tip.
Watch Tutorials
Click on the button in the upper right-hand corner of Serato DJ Pro, then to launch
your default internet browser and watch tutorials, to help you get familiar with Serato DJ Pro.
Get Support
Click on the button in the upper right-hand corner of Serato DJ Pro, then to launch your
default internet browser and navigate to the Serato DJ Pro knowledge base, where you can nd helpful
articles and guides on Serato DJ Pro. Alternatively, type in the box, with keywords, to
search the Serato DJ Pro knowledge base for specic, related topics.