Serato Hercules DJControl Starlight User manual

1
Quick-Start Guide
Hercules
DJControl Starlight

2
# STARLIGHT CONTROL FUNCTION
1 MASTER Output to speakers (3.5mm or 1/8”)
2 USB Connect USB data cable to PC
3 HEADPHONE Output to headphones (3.5mm or 1/8”)
Overview
1 2 3
Setup
Serato Software
The Hercules DJControl Starlight is a “Serato DJ Lite hardware unlocked” device, meaning it works with
Serato DJ Lite out of the box.
It is also a “paid upgrade to Serato DJ Pro device”, meaning it requires the purchase & activation of a Serato
DJ Pro license, in order to be used with Serato DJ Pro.
You can also trial Serato DJ Pro, for up to 14-days.
Click here to nd out more about buying or activating Serato DJ Pro
Please ensure you have the latest version of Serato DJ Pro installed:
Click here to download Serato DJ Pro
Driver Software
The Hercules DJControl Starlight does not requires manufacturer specic drivers on either Mac & Windows
operating systems. Simply connect the device to your PC, and launch the latest version of Serato DJ Pro.

3
# STARLIGHT
CONTROL
FUNCTION SHIFT
1JOG WHEEL Control waveform within Serato DJ Pro in vinyl mode, or
pitch bend
2 CHANNEL 1 CUE Press to cue channel 1 for monitoring in headphones Press to monitor cue
master
3 SHIFT Used with other controls that have the SHIFT modier func-
tion
4 MASTER GAIN Adjust Master output level
5 BASS/FILTER TOGGLE Toggle between lter & bass for channel 1/2
6 VOLUME -/+ Adjust channel volume
7 HEADPHONE -/+ Adjust headphone volume
8 CHANNEL 2 CUE Press to cue channel 2 for monitoring in headphones Press to monitor cue
+ master
9 VINYL Press to toggle jog wheel between scratch vinyl mode and
pitch bend
10 TEMPO SLIDER Adjust tempo/pitch Ignore adjustment
11 PLAY/PAUSE Toggles Play/Pause on selected deck Stutter play
12 CUE Cues from temp cue point/Set temp cue point Load previous track
13 SYNC Turn SYNC on Turn SYNC o
14 BASS/FILTER -/+ Adjust low EQ / Filter
15 CROSSFADER Crossfade audio between channel 1-2
16 PERFORMANCE PADS SEE PERFORMANCE PADS FOR
MORE INFORMATION
Overview
21 3 4 5 6 7 8 9 10
111213141516

4
Performance Pads
The Hercules DJControl Starlight comes with 4 performance pads, that can be used across 4 dierent
performance pad modes. These consist of:
HOT CUE mode: Pads 1-4 trigger Serato DJ Pro Cue points, and if no Cue point is present on that slot/
pad, pressing that pad will set a Cue point.
LOOP mode: Pads 1-4 trigger triggers an autoloop of variable sizes. Use the loop selection area in the
Serato DJ Pro user interface, to inuence the 4 available autoloop sizes.
FX mode: Hold SHIFT while pressing the HOT CUE mode button to enter FX mode. Press pads 1-4 in this
mode to trigger FX via multi & single FX modes.
SAMPLER mode: Hold SHIFT while pressing the LOOP mode button to enter SAMPLER mode. Press
pads 1-4 in this mode to trigger samples loaded into the Serato DJ Pro Sampler. Holding SHIFT while
pressing a pad will load a sample if no sample is loaded to the respective slot.
DJ-FX
The DJ-FX in Serato DJ Pro are powered by iZotope™. Click the FX button to open the FX
panel. Select either 1, 2, or M to assign the selected eect bank to a deck or the master output.
There are two available modes with DJ-FX. Single FX Mode allows you to select one eect per FX bank, and
has multiple parameters that can be adjusted. Multi FX Mode allows you to select up to three eects per
FX bank, and adjust only one parameter, the FX Depth. The same eects available in Single FX mode are
available in Multi FX mode, as well some additional presets.
You can select between the two FX modes by clicking either the Single FX mode button or Multi FX
mode button
STARLIGHT CONTROL SINGLE FX MODE MULTI FX MODE
PAD 1 Hold & release for Eect On/
O
Hold & release for Slot 1 Eect
On/O
PAD 2 Toggle FX parameter 1 Hold & release for Slot 2 Eect
On/O
PAD 3 Toggle FX parameter 2 Hold & release for Slot 3 Eect
On/O
PAD 4 Cycle Beats multiplier Cycle Beats multiplier

5
The Hercules DJControl Starlight comes equipped with lights that are reactive to Serato software.
Lighting control settings are adjusted in Serato DJ Pro, and can be changed via
Setup --> Mixer --> Lighting Control (see image below)
O: Lights are o
On: Lights are on (non-audio reactive)
Beat Fade: Lights turn red for downbeats and blue for non-downbeats
Beat Flash: Lights ash red for downbeats and ash blue for non-downbeats
Master Volume: All lights are lit white and intensity is dependant on controller volume (channel + master)
Waveform Color: Lights react per deck to waveform colors. Intensity is increased when ‘EQ Colored Wave-
forms’ is enabled under Setup --> Library + Display
Cue Point Countdown: Lights react per deck and illuminate to match the closest Cue point, then fade
white
MIDI
The MIDI feature in Serato DJ Pro provides the ability to remap Serato DJ Pro software functions to your
primary Serato controller, interface or mixer. You can also assign controls to a secondary MIDI controller to
further enhance your performance.
For more information on MIDI mapping with Serato DJ Pro click here
To remap your supported Serato device, open the SETUP screen and click the MIDI tab. If your Serato
device supports hardware remapping, it will show up in the MIDI Devices list at the top.
Select your connected device from the MIDI Devices list and make sure the “Allow Serato Hardware
Remapping” option is checked.
Once checked, the MIDI assign button at the top of the screen will become available for you to start
remapping.
You can save, edit or delete MIDI presets in the MIDI tab of the SETUP screen. Clicking ‘Restore Defaults’
will erase any custom mappings for all connected devices and revert their functions back to default.
Lights

6
Help
Show Tooltips
Click on the button in the upper right-hand corner of Serato DJ Pro, then to enable
tooltips. Tool tips provide a handy way to learn the various features of Serato DJ Pro.
Move the mouse over a section of the screen to bring up a context sensitive tool tip.
Watch Tutorials
Click on the button in the upper right-hand corner of Serato DJ Pro, then to launch
your default internet browser and watch tutorials, to help you get familiar with Serato DJ Pro.
Get Support
Click on the button in the upper right-hand corner of Serato DJ Pro, then to launch your
default internet browser and navigate to the Serato DJ Pro knowledge base, where you can nd helpful
articles and guides on Serato DJ Pro. Alternatively, type in the box, with keywords, to
search the Serato DJ Pro knowledge base for specic, related topics.