Serato Numark Party Mix User manual

1
Quick-Start Guide
Numark Party Mix

2
Overview
# NUMARK PARTY MIX CONTROL FUNCTION
1 MASTER Connect RCA output
2 PARTY BALL MODE Press to cycle through Party Ball modes, mode 1 & 2 work with Serato DJ Pro
SEE LIGHTS FOR MORE INFORMATION
3 PARTY BALL LIGHTS Reactive lights
4 USB Connect USB data cable to PC
5 HEADPHONE Output to headphones (3.5mm or 1/8”)
1 2 3 4
5
Setup
Serato Software
The Numark Party Mix is a “Serato DJ Lite hardware unlocked” device, meaning it works with Serato DJ Lite
out of the box.
It is also a “paid upgrade to Serato DJ Pro device”, meaning it requires the purchase & activation of a Serato
DJ Pro license, in order to be used with Serato DJ Pro.
You can also trial Serato DJ Pro, for up to 14-days.
Click here to nd out more about buying or activating Serato DJ Pro
Please ensure you have the latest version of Serato DJ Pro installed:
Click here to download Serato DJ Pro
Driver Software
The Numark Party Mix does not requires manufacturer specic drivers on either Mac & Windows operating
systems. Simply connect the device to your PC, and launch the latest version of Serato DJ Pro.

3
# NUMARK PARTY MIX
CONTROL
FUNCTION
1 MASTER GAIN Adjust Master output level
2BROWSE Library Scroll. Press to toggle between track and crate selection
3 LOAD 1 / 2 Load highlighted track to respective deck. Double press to Instant Double
4 EQ/GAIN Adjust channel EQ (treble & bass) and channel gain (level)
5 CHANNEL CUE Press to cue channel for monitoring in headphones
6JOG WHEEL Control waveform within Serato DJ in vinyl mode, or pitch bend
7 TEMPO SLIDER Adjust tempo/pitch
8 PLAY/PAUSE Toggles Play/Pause on selected deck
9 CHANNEL FADER Adjust channel volume
10 CROSSFADER Crossfade audio between channel 1-2
11 CUE GAIN Adjust cue gain
12 CUE MIX Adjust headphone mix between CUE and PGM (Master)
13 CUE Cues from temp cue point/Set temp cue point
14 SYNC Turn SYNC on
15 PERFORMANCE PADS SEE PERFORMANCE PADS FOR MORE INFORMATION
16 SCRATCH Press to toggle between scratch vinyl mode and pitch bend
Overview
1 2 3 4 5
891011121314
15
16
6
7

4
Performance Pads
The Numark Party Mix comes with 4 performance pads, that can be used across 4 dierent performance
pad modes.
Repeatedly pressing the PAD MODE button will cycle through the available pad modes, lighting up that
pad modes respective LED to indicate a selection. The last pad mode, PAD FX, will illuminate all 3 LED’s to
indicate it has been selected.
These consist of:
CUE mode: Pads 1-4 trigger Serato DJ Pro Cue points, and if no Cue point is present on that slot/pad,
pressing that pad will set a Cue point.
LOOP mode: Pads 1-4 trigger triggers an autoloop of variable sizes. Use the loop selection area in the
Serato DJ Pro user interface, to inuence the 4 available autoloop sizes.
SAMPLER mode: Press pads 1-4 to trigger samples loaded into the Serato DJ Pro Sampler.
PAD FX mode: Press pads 1-4 to trigger FX via multi & single FX modes.
DJ-FX
The DJ-FX in Serato DJ Pro are powered by iZotope™. Click the FX button to open the FX
panel. Select either 1, 2, or M to assign the selected eect bank to a deck or the master output.
There are two available modes with DJ-FX. Single FX Mode allows you to select one eect per FX bank, and
has multiple parameters that can be adjusted. Multi FX Mode allows you to select up to three eects per
FX bank, and adjust only one parameter, the FX Depth. The same eects available in Single FX mode are
available in Multi FX mode, as well some additional presets.
You can select between the two FX modes by clicking either the Single FX mode button or Multi FX
mode button
PARTY MIX Control Single FX mode Multi FX mode
PAD 1 Hold & release for Eect On/O Hold & release for Slot 1 Eect
On/O
PAD 2 Toggle FX parameter 1 Hold & release for Slot 2 Eect
On/O
PAD 3 Toggle FX parameter 2 Hold & release for Slot 3 Eect
On/O
PAD 4 Cycle Beats multiplier Cycle Beats multiplier

5
The Numark Party Mix comes equipped with Party Ball lights that are reactive to Serato software.
Press the button on the rear of the unit, to cycle through the Party Ball modes.
Mode 1 (default) and mode 2 are compatible with Serato software.
Mode 1: Lights respond to RGB setting from Serato software, and 3 further Programs can be
selected via Setup --> Mixer --> Lighting Control (see image below)
Program 1 turns the RGB lights on and o in a sequential order, based on the beat played.
Program 2 ashes the RGB lights rapidly in a squential order, based on the beat played.
Program 3 illuminates all 3 RGB lights at the same time, but their intensity is determined by the Master output level.
Mode 2: Lights randomly illuminate in response to beat information from Serato software.
MIDI
The MIDI feature in Serato DJ Pro provides the ability to remap Serato DJ Pro software functions to your
primary Serato controller, interface or mixer. You can also assign controls to a secondary MIDI controller to
further enhance your performance.
For more information on MIDI mapping with Serato DJ Pro click here
To remap your supported Serato device, open the SETUP screen and click the MIDI tab. If your Serato
device supports hardware remapping, it will show up in the MIDI Devices list at the top.
Select your connected device from the MIDI Devices list and make sure the “Allow Serato Hardware
Remapping” option is checked.
Once checked, the MIDI assign button at the top of the screen will become available for you to start
remapping.
You can save, edit or delete MIDI presets in the MIDI tab of the SETUP screen. Clicking ‘Restore Defaults’
will erase any custom mappings for all connected devices and revert their functions back to default.
LIGHTS

6
Help
Show Tooltips
Click on the button in the upper right-hand corner of Serato DJ Pro, then to enable
tooltips. Tool tips provide a handy way to learn the various features of Serato DJ Pro.
Move the mouse over a section of the screen to bring up a context sensitive tool tip.
Watch Tutorials
Click on the button in the upper right-hand corner of Serato DJ Pro, then to launch
your default internet browser and watch tutorials, to help you get familiar with Serato DJ Pro.
Get Support
Click on the button in the upper right-hand corner of Serato DJ Pro, then to launch your
default internet browser and navigate to the Serato DJ Pro knowledge base, where you can nd helpful
articles and guides on Serato DJ Pro. Alternatively, type in the box, with keywords, to
search the Serato DJ Pro knowledge base for specic, related topics.