Seville Classics SHE18308B User manual

Customer Service Informaon
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: Suppor[email protected]
Homepage: www.SevilleClassics.com
07062021
FAQs
Q. Why is the table wobbly and/or unstable?
A. It's because the top is not securely inserted into the four poles. If the four poles are
snugly and tightly fit into the top, the table will be stable.
Q. Where can I purchase wheels?
A. Visit www.sevilleclassics.com and search for model no. 'SHE18308WH', stainless
steel worktable wheels.
Q. Where can I buy extra wire shelves?
A. Visit www.sevilleclassics.com and search for model no. 'SHE18308SH', stainless
steel worktable extra shelf.
Q. Can it hold a counter top dishwasher?
A. Sure! Table top holds up to 500 lbs. per shelf and up to 1,000 lbs. evenly distributed
across the shelves and top. It's perfect for small appliances.
Q. Can I use it in a restaurant?
A. Yes, our stainless-steel worktable is certified by the NSF to NSF/ANSI Standard 2 -
Food Equipment for use in commercial kitchens and dry storage room environments.
Safety
Do not tip the table over or place upside down.
Do not place more than 1,000 lbs. on the table top and wire shelf combined.
Specifications
Dimensions: 49" W x 24" D x 35.5" H
Weight Capacity: 1,000 lbs. evenly distributed
Weight: 55 lbs.
Model: SHE18308B
Thank you for choosing Seville Classics! We hope that you enjoy your new
stainless-steel table. Please read through this user guide for parts list, assembly
instrucons, frequently asked quesons and contact informaon.
07062021
Commercial-Grade NSF
Stainless-Steel Top Work Table

Parts List
A. S.S. Top (1)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to [e-mail]
1
B. Wire Shelf (1)
C. Slip Sleeves (16 )
D. Poles (4)
E. Leveling Feet (4)
2
Assembly Instrucons
STEP 1
Fit rubber caps on the
bottoms of the LEVELING
FEET (E), then screw the
feet into the bottom of
POLES (D).
STEP 2
Clip SLIP SLEEVES (C)
around the bottom grooves
of the POLES (D).
IMPORTANT: Count up
from bottom grooves to
make sure all slip sleeves
are positioned at the same
height to ensure a level
shelf.
Slide WIRE SHELF (B) over
slip sleeves and press down
firmly.
STEP 3
Clip SLIP SLEEVES (C)
around the top grooves on
each pole.
Fit TOP (A) over slip sleeves
and press down firmly.
Ensure a snug tight fit or
the table will not be
stable.
CONGRATULATIONS!
Enjoy your new stainless-
steel worktable!