Seville Classics airLIFT OFF65927 User manual

1
airLIFT® Glass & Wood Height Adjustable Standing Desk
Models: OFF65927
Thank you for choosing Seville Classics! We hope that you enjoy your new sit-to-stand
desk. Please read through this user guide for parts list, instructions, frequently asked
questions and contact information.
082020

1
Welcome!
We at Seville Classics® are thrilled that you’ve chosen to go
airLIFT®! Our desks are some of the easiest to use, most versatile
and sophisticated electronic desks on the market. With this, you
can stay active throughout the day without sacricing productivity.
Choosing a height-adjustable desk is not just a convenient
upgrade—it’s a healthy one! Too much sedentary behavior can
present a real health risk, even for people who are already
healthy. Simply getting up throughout the day and moving is a
great way to ght the consequences of too much sitting.
airLIFT® is here to help.
Please read through this manual for more information regarding
your airLIFT® Electric Height Adjustable Standing Desk.
Thank you for choosing Seville Classics®! We hope you will enjoy
this desk for many years to come.

2
Table of Contents
3
4
5
5
6
6
7
8
9
10
11
12
13
14
15
18
19
20
21
22
23
24
24
SAFETY INSTRUCTIONS………………………………………………………………
QUICK SETUP…………………………………………………………………………….
PARTS LIST………………………………………………………………………………...
TOOLS & HARDWARE LIST………………………………………………………...
ASSEMBLY INSTRUCTIONS………………………………………………………...
Attach Brackets to Legs...…………………………………………………..
Attach Legs to Top……………………………………………………………..
Connect Motor…………………………………………………………………..
Installing Feet…………………………………………………………………….
Turn Desk Over………………………………………………………………….
INITIALIZATION & USE INSTRUCTIONS………………………………………
TROUBLESHOOTING………………………………………………………………….
WARRANTY INFORMATION………………………….…………………………….
FCC INFORMATION……………………………………………………………………
CUSTOMER SERVICE INFORMATION………………………………………….

3
Safety Instructions
FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND
OPERATING INSTRUCTIONS AND WARNINGS REGARDING THE USE OF THIS
PRODUCT MAY RESULT IN SERIOUS BODILY INJURY
•Read and understand this manual before attempting to install or
•Assure that everyone who uses this product is informed of the contents of this manual. This
is the responsibility of the Purchaser.
•Not intended for use by young children or for those persons who require supervision.
•Do not open any of the components – legs, control box, or controller. There is a risk of
electric shock.
•Assemble desk on a at and level surface.
Before You Begin
Layout all components and hardware. Visually examine and make sure components are free of
damage. If there is visual damage to any component, it must not be installed.
Two people are needed to turn or move the desk and some of it’s components. When moving or
turning the assembled desk, grab the legs, not the desk top.
Make sure to assemble on a soft and non-abrasive surface to avoid scratches.
Check all connections and cables. Make sure control box is connected to a power outlet.
If the control box makes unusual noises or emits an odor, switch power o immediately.
Use & Liability
Safe use of this product is possible only when the operating instructions are read completely
and the instructions contained are strictly observed. Persons who do not have the necessary
experience or knowledge of this product must not use the product. Persons with reduced
physical or mental abilities should not use this product, unless they are under supervision or
they have been thoroughly instructed in the use of the apparatus by a person who is
responsible for the safety of these persons. Children should be closely supervised to ensure that
they do not play with this product.
The desk MUST be INITIALIZED before rst use.
Read the INITIALIZATION chapter prior to operation.

4
Quick Setup!
Only takes 15 minutes to complete. All required tools are included.
Keep the top in the box during assembly to protect it from scratches.
Legs
Feet
Brackets
Top
Control Box
Motors

5
Parts List
Tools & Hardware List
If you’re missing parts, contact us for replacements at [phone] or
send an email to [e-mail]
Please make sure you have all the parts on this list.
Leave the Top in the box during assembly
A. Top (1)
B. Legs (1)
C. Brackets (2)
D. Feet (2)
E. M6x12 Screws (8)
F. M8x30 Screws (8)
G. 4 mm Hex Key
H. 5 mm Hex Key

6
STEP 1.
Attach BRACKETS (C) to sides of LEGS (B) with M6x12 SCREWS (E) using
4 mm HEX KEY (G).

7
STEP 2.
Align holes on BRACKETS (C) and attach with M6x12 SCREWS (E) using
4 mm HEX KEY (G). Make sure the motor is on the same side as the control box.

8
STEP 3.
Connect the plugs from the motor to the control box.

9
STEP 4.
Attach FEET (D) to the bottom of table legs with four M8x30 BOLTS (F) using
5 mm HEX KEY (H).
Take this time to make sure all screws, bolts, and cables
have been secured tightly.

10
WARNING: TWO PEOPLE ARE NECESSARY TO TURN TABLE.
DESK IS HEAVY. LIFT WITH EXTREME CAUTION.
STEP 5. Turn the desk onto its feet.
TIP: Screw the leveling feet in and
out as necessary to ensure the desk
stands level.
DO NOT put weight on desk yet.
Lift with 2 people

11
Use Instructions
DESK MUST BE INITIALIZED BEFORE FIRST USE
Up Arrow Down ArrowMemorySave Memory Display USB Charging Port
Initialize & Reset
Press and hold the Down Arrow until RST appears on the display.
Initialization is complete when the panel displays the height of the desk.
Adjust Height
Press and hold the Up Arrow to lift.
Press and hold the Down Arrow to lower.
Save Height
Press M button until “S-” appears on the display.
Then press a memory button to save height.
Recall Height
Press the desired memory button. The desk will then adjust to the stored height.
Limit Height
Press the Up Arrow + Down Arrow for 5 seconds until chime is heard.
Cancel by pressing Up Arrow + Down Arrow for 5 seconds until buzzer is heard.
Child Safety Feature
Press the M button + Up Arrow for 5 seconds to lock the controller and prevent
the desk from going up or down. LOC will display. Press the M button + Down
Arrow for 5 seconds to unlock the controller.

12
Troubleshooting
Problem Acon
Desk does not go up or down and the
controller does not illuminate when any
button is pressed.
Check all connections. Make sure power cord is plugged into the control box
and a power outlet. Press any button on the
controller and make sure it illuminates. Reset the desk.
Desk does not go up or down and the
controller illuminates when any
button is pressed.
Unplug the power cord and re-plug after 10 seconds.
Reset the desk. If the problem persists, switch motor cables from one port to
another at control box and reset again.
Columns do not go up evenly.
Unplug the power cord and re-plug after 10 seconds.
Reset the desk. If the problem persists, switch motor cables from one port to
another at control box and reset again.
Desk wobbles excessively. It is normal that desk moves slightly at standing height when in use. Retighten
all screws and bolts, and adjust leveling feet to make sure table stands level.
Desk legs are noisy. It is normal that desk makes noise when the stages move past each other.
Apply silicon-based lubricant if it is unusually noisy.
Error Code Problem Acon
E01, E06,
E07 Power fault Unplug and re-plug the power cord. Reinitialize the desk.
E02, E08 Desktop sloping Make sure the desk is attached to the legs correctly.
Reinitialize the desk.
E04 Handset fault Unplug and re-plug the controller cables. Reinitialize the desk.
E05 Anti-collision Make sure nothing obstructing the desk from adjusting.
E11, E13, Connection cable failure Unplug and re-plug the motor and power cables.
Reinitialize the desk.
E12 Controller fault Please contact customer service.
E14 to E16 Motor fault Unplug and re-plug the motor and power cables.
Reinitialize the desk.
E17 Motor running direction fault Unplug and re-plug the motor and power cables.
Reinitialize the desk.
E18 Overloading Remove some weight from the desk top until error clears.
HOT HOT is displayed on the panel. The desk motors are overheated. Stop using the desk for 20
minutes and let them cool down.
Error Codes
Please contact customer service for additional support.
Phone: [phone] | Email: [e-mail]

13
Warranty Information
7-Year Non-Electronic Component Warranty
Seville Classics, Inc. warrants to the original retail purchaser that if this product proves to be defective in
material or workmanship, we will replace the aected non-electronic part(s) for a period of seven
years on Seville Classics airLIFT® Electric Height Adjustable Standing Desks from the date of
original purchase.
2-Year Electronic Component Warranty
Seville Classics, Inc. warrants to the original retail purchaser that if this product proves to be defective in
material or workmanship we will replace the aected electronic part(s) for a period of two years on
Seville Classics airLIFT® Electric Height-Adjustable Standing Desks from the date of original purchase.
Except for the express warranty set forth above and except to the extent prohibited by applicable law,
Seville Classics grants no other express or implied warranties with respect to the product, its tness for
any purpose, its quality, or its merchantability. The liability of Seville Classics under the warranty shall be
limited to the amount paid by the customer for the product. Seville Classics shall not be liable for any
loss of use of the product, or other incidental or consequential costs, expenses or damages incurred by
the customer or other user.
This warranty covers only the airLIFT® Height Adjustable Standing Desk sold in the United States of
America and Canada. Some states do not allow the exclusion or limitations of implied warranties or
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives
you specic legal rights, and you may also have other rights that vary from state to state.
During the applicable warranty period, Seville Classics, at its option, will either refund the original pur-
chase price or replace the aected part(s) with comparable part(s) when the aected part(s) are
returned, postage prepaid, to the address below:
Seville Classics Inc.
19401 South Harborgate Way
Torrance, CA 90501 – 1322 U.S.A.
To obtain service under this warranty, you must:
1. Register your product at www.SevilleClassics.com/warranty
2. Contact our customer service at [phone] or email [e-mail];
3. Return the aected part(s) postage prepaid to Seville Classics pursuant to our customer service
representative; and
4. Include in the package:
A. A copy of the original bill of sale, your charge or credit receipt, or other satisfactory proof of
the date of the original purchase date of the product, and the price paid; and
B. A short detailed description of the problem, the name and phone number of the contact
person.

14
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
•Consult the dealer or an experienced Radio/TV technician for help

15
082020
Customer Service Information
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [e-mail]
Homepage: www.SevilleClassics.com