Seville Classics WEB546 User manual

Thank you for choosing Seville Classics! We hope that you enjoy your
organizer cart. Please read through this user guide for parts list,
assembly instrucons, frequently asked quesons and contact info.
Model #: WEB546
9-Bin Organizer Cart, Gradient Gray
FAQs
Q. How big is it?
A. Unit measures 14" D x 32" W x 34" H
Q. Can I use it without the casters?
A. No, the cart is not designed to be used without the casters.
Q. How much weight can it hold?
A. Weight capacity per bin: 11 lbs. (5 kgs)
Weight capacity overall: 99 lbs. (45 kgs)
Customer Service Informaon
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [email protected]
Homepage: www.SevilleClassics.com
3-2018 3-2018
STEP 4. Insert Bins
Hang BINS (C,D) on crossbars.

Parts List
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to [e-mail]
Assembly Instrucons
STEP 1. Aach Casters
Push SLEEVES (I) into boom of
SIDE FRAME (A) poles.
Push one CASTER (H) and one
LOCKING CASTER (G) into the
SLEEVES (I) on each pole.
STEP 2. Aach Crossbars
Fit a WASHER (J) between the SIDE
FRAME (A) and CROSSBAR (B).
Be sure the curved side of the
washer is ush with frame.
Flat side of washer MUST sit in end
of crossbar. Curved side of washer
MUST t against side frame.
Send a SCREW (F) through outer
holes on SIDE FRAME (A) and into
CROSSBAR (B).
Tighten with HEX WRENCH and
repeat for remaining crossbars.
STEP 3. Connect Side Frames
Aach second SIDE FRAME (A) to
CROSSBARS (B) and WASHERS (J).
Tighten with HEX WRENCH (E).
A. Side frame (2)
B. Crossbar (6)
C. Narrow Bin (3)
D. Wide Bin (6)
E. Hex Wrench (1)
F. Screws (12)
G. Locking Caster (2)
H. Caster (2)
I. Sleeve (4)
J. Washer (12)