Seville Classics WEB571 User manual

Customer Service Informaon
Seville Classics, Inc
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [email protected]
Homepage: www.SevilleClassics.com
Cauon
Place heavier items on the lower shelves and lighter ones on the top.
Do not stand or climb on the shelving system.
Do not drop heavy items on the system.
Do not move the system while loaded.
072023
Specicaons
Dimensions: 60" W x 24" D x 76" H (72" H on leveling feet), 1" Pole Diameter
Weight capacity Per shelf Overall
On leveling feet
800 lbs. (362.8 kg) 4000 lbs. (1814 kg)
On wheels
100 lbs. (45.3 kg) 500 lbs. (226.8 kg)
Addional parts and accessories are available for purchase online at:
www.SevilleClassics.com
View assembly online here:
hps://www.youtube.com/watch?v=N6iRVVqBG-I
Model #: WEB571, SHE24600
Thank you for choosing Seville Classics! We hope that you enjoy your
commercial-grade steel wire shelving! Please read through this guide for
parts list, assembly instrucons, frequently asked quesons and further
contact informaon.
072023
Commercial-Grade 5-Tier
NSF Steel Wire Shelving with Wheels
60" W x 24" D x 76" H
Shelf Labels
8-Pack
Model No.: WEB106
Shelf Liners
60" x 24" (5-Pack)
Model No.: WEB753
UltraDurable Shelf
60" x 24"
Model No.: SHE24609

Parts List
B. Top poles (4)
(Plasc cap on end)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to Supp[email protected]m
1
D. Shelves (5)
F. Leveling feet (4)
G. 4" Wheels (2)
H. 4" Locking
wheels (2)
E. Slip sleeves (20)
or
Assembly Instrucons
STEP 1.
Screw LEVELING FEET (F) or WHEELS
(G, H) into base of boom poles.
Repeat for all boom poles.
STEP 2.
Snap SLIP SLEEVES (E) around the
grooves on BOTTOM POLES (A) for
your lowest shelf.
TIP! Count the number of grooves
from the boom of the pole to keep
the height consistent.
A. Boom poles (4)
(Threaded end)
C. Connectors (4)
(May be aached to poles)
2
STEP 3.
Fit SHELF (D) over the top of the 4 poles
and over SLIP SLEEVES (E).
Repeat STEPS 2-3 for next shelf.
TIP! If necessary, lightly tap shelves into
place with a rubber mallet.
STEP 4.
Screw CONNECTORS (C) into top of
BOTTOM POLES (A).
Screw TOP POLES (B) to CONNECTORS (C).
TIP! Connectors may be pre-installed.
STEP 5.
Repeat STEPS 2-3 for remaining shelves.
Congratulations!
Your shelving system is
now assembled.