Shadow-Caster SCM-DL-RGBW User manual

SCM-DL-RGBW
Specs:
Power consumption: 4 watts,
250mA at 12V, 125mw at 24V
Features:
Brightness control: Brightness control with standard
on/off switch
Shadow-NET enabled: Full color and brightness control
with optional Shadow-Net enabled controller
Power toggle color Change: Turn the power and off to
change colors.
Installation Instruction:
Drill 1-1/4" hole
Mount the retainer ring with the three screws provided
Connect the wiring
Put a 1/8" size ball of silicone sealant over each screw head
Gently push the light housing onto the retaining ring and rotate
it until it drops into place
Push more firmly to seat the light into the retainer.
Operation:
When power is applied to the SCM-Down Light, the
brightness slowly ramps up to full power over 8 seconds.
If the power switch is toggled on/ off quickly within this
ramp up period, this will program this brightness level
until the light is reset. To reset the light, turn the
lights off for 10 seconds.
To toggle to another color, simply turn the power
off and then back on again within 2 seconds.
The color rotation will be White, Blue,
Red, Green Aqua, Blue Violet, Violet,
Magenta, Yellow, Purple, Orange,
Green Yellow.
SCM-DL-RGBW
Specs:
Power consumption: 4 watts,
250mA at 12V, 125mw at 24V
Features:
Brightness control: Brightness control with standard
on/off switch
Shadow-NET enabled: Full color and brightness control
with optional Shadow-Net enabled controller
Power toggle color Change: Turn the power and off to
change colors.
Installation Instruction:
Drill 1-1/4" hole
Mount the retainer ring with the three screws provided
Connect the wiring
Put a 1/8" size ball of silicone sealant over each screw head
Gently push the light housing onto the retaining ring and rotate
it until it drops into place
Push more firmly to seat the light into the retainer.
Operation:
When power is applied to the SCM-Down Light, the
brightness slowly ramps up to full power over 8 seconds.
If the power switch is toggled on/ off quickly within this
ramp up period, this will program this brightness level
until the light is reset. To reset the light, turn the
lights off for 10 seconds.
To toggle to another color, simply turn the power
off and then back on again within 2 seconds.
The color rotation will be White, Blue,
Red, Green Aqua, Blue Violet, Violet,
Magenta, Yellow, Purple, Orange,
Green Yellow.

2” [50.8mm]
.2” [5mm]
Height Top
Bottom
Base
Plate
Installation Diagram
Scale 1:1 (If in doubt ask)
SCM-DL
SCM-DL (6/17)
WARNING! Do Not Use ACETONE
For Cleaning. Use Alcohol and Soft Cloth.
#4 Screw Size
1/2” [12.5mm]
316 Stainless Steel
Phillips Rounded Head
Screws
Top View
Side View
Bottom View
1/2” [13mm]
2” [50.8mm]
.2” [5mm]
Height Top
Bottom
Base
Plate
Installation Diagram
Scale 1:1 (If in doubt ask)
SCM-DL
SCM-DL (6/17)
WARNING! Do Not Use ACETONE
For Cleaning. Use Alcohol and Soft Cloth.
#4 Screw Size
1/2” [12.5mm]
316 Stainless Steel
Phillips Rounded Head
Screws
Top View
Side View
Bottom View
1/2” [13mm]