Shark Rocket Deluxe Pro User manual

Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
ASSEMB LY
AHandheld Vacuum
BMultiFlex™ Wand
CMotorized Floor Nozzle
DDuster Crevice Tool
EUpholstery Tool
FHard Floor Hero™
GAccessory Bag
HWall Mount with Tool
Storage
WHAT’S INSIDE
UV330_QSG_170608
A
E F
G
C
B
D
QUICK START GUIDE
DELUXE PRO
Corded Ultra Light
2
(Click)
1
(Click) H
Wall Mount
Please see included instruction sheet for wall mount
installation information.
To store, press the Lock
Release button and hold
it down while folding
the handheld vacuum
forward, until the
unit locks in storage
mode. Wrap the power
cord around the cord
hooks, and use the handle
to carry the vacuum to its
storage location.
To take the vacuum out
of storage mode, unwind
the cord, then press the
MultiFLEX Lock Release
button while lifting up the
handheld vacuum. The
wand will lock in place.
Easily access hard-to-reach areas under
furniture. Press the MultiFLEX Lock Release
button to lower the angle of the wand to
increase your reach.
MULTIFLEX STORAGE
MULTIFLEX™ REACH
MultiFlex
Lock Release
MultiFlex
Lock Release
Handle

VERSATILE FLOOR-TO-CEILING CLEANING
@sharkcleaning
2Choose Setting
The Rocket®Deluxe Pro has a 2-speed
power slider switch on the handle. Slide
the power switch to the appropriate floor
setting and start cleaning.
1Plug In Vacuum
Then place your foot
gently on the floor
nozzle and tilt the
handle back.
FLOOR CLEANING ABOVE-FLOOR CLEANING
Setting II
Deep cleans carpets by removing
embedded dirt.
The brushroll spins faster to pick
up debris below the surface of
your carpets.
Setting I
Gentle on bare floors and delicate
area rugs.
The brushroll spins slowly to clean
bare floors and delicate arearugs.
Press the Wand Release
button on the top of the
wand to disconnect it from
the handheld vacuum.
1Stand the vacuum upright.
Step on the foot pedal
and pull the wand up to
disconnect the motorized
floor nozzle.
2Attach desired
cleaning accessory.
NOTE: Use Setting I
for all above-floor
accessories.
NOTE: For deep carpet cleaning
per ASTM F608 (embedded dirt
in carpets) please set to High Pile
Carpets (ll).
OR
Wand
Release
Floor Nozzle
Release
Wand Release
For questions or to register your product, contact us at 1-800-798-7398 or visit us online at sharkclean.com
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.