Sharp DK-KP85PH User manual

DK-KP85PH
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUAL DE MANEJO
BRUKSANVISNING
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE OPERAÇÃO
KÄYTTÖOHJE
OPERATION MANUAL
iPad, iPhone, iPod, iPod classic, iPod nano,and iPod
touch are trademarks of Apple Inc.,registered in the
U.S. and other countries. Lightning is a trademark
of Apple Inc..
MODELL
MODÈLE
MODELO
MODELL
MODELLO
MODEL
MODELO
MALLI
MODEL
SLIM-AUDIO-SYSTEM
MICRO SYSTÈME SLIM
SISTEMA MICRO DELGADO
TUNT MIKROSYSTEM
SISTEMA MICRO
SLIM MICRO SYSTEEM
SISTEMA MICRO SUPER LEVE
MICRO STEREO JÄRJESTELMÄ
SLIM MICRO SYSTEM
DEUTSCH
PORTUGUÊS
FRANÇAIS
ESPAÑOL
SVENSKA
ITALIANO
NEDERLANDS
SUOMI
ENGLISH
Siehe Seiten i bis viii und D-1 bis D-24.
Se reporter aux pages i à viii et F-1 à F-24.
Consulte las páginas i a viii y S-1 a S-24.
Hänvisa till sidorna i till viii och V-1 till V-24.
Leggere le pagine i a viii e I-1 a I-24.
Raadpleeg de bladzijden i t/m viii en N-1 t/m N-24.
Favor consultar as páginas i a viii e P-1 a P-24.
Sivut i - viii sekä SU-1 - SU-24.
Please refer to pages i to viii and E-1 to E-24.
DK-KP85PH_OM_FRONT.indd C-1DK-KP85PH_OM_FRONT.indd C-1 2013-04-25 21:24:442013-04-25 21:24:44

i
BESONDERE ANMERKUNGEN
REMARQUES SPÉCIALES
NOTAS ESPECIALES
SÄRSKILDA ANMÄRKNINGAR
NOTE PARTICOLARI
BIJZONDERE OPMERKINGEN
NOTAS ESPECIAIS
ERITYISHUOMAUTUS
SPECIAL NOTES
Hiermit erklärt SHARP Electronics, dass sich das Gerät
SHARP Slim-Audio-System DK-KP85PH in Überein-
stimmung mit den grundlegenden Anforderungen und den
übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/
EG befindet. Die Konformitätserklärung kann unter folgender
Adresse gefunden werden:
http://www.sharp.de/doc/DK-KP85PH.pdf
●
Par la présente, SHARP Electronics déclare que l’appareil
SHARP Micro Systčme Slim DK-KP85PH est conforme aux
exigences essentielles et aux autres dispositions pertinentes
de la directive 1999/5/CE. La déclaration de conformité peut
ętre consultée sur le site:
http://www.sharp.de/doc/DK-KP85PH.pdf
●
Por la presente, SHARP Electronics, declara que este
SHARP Sistema Micro Delgado DK-KP85PH cumple con
los requisitos esenciales y otras exigencias relevantes de
la Directiva 1999/5/EC Pueden consultar la declaración de
conformidad en:
http://www.sharp.de/doc/DK-KP85PH.pdf
●
Härmed intygar SHARP Electronics att denna SHARP
Tunt Mikrosystem DK-KP85PH stĺr I överensstämmelse
rned de väsentliga egenskapskrav och övriga relevanta
bestämmelser som framgĺr av direktiv 1999/5/EG. Deklaration
om överenstämmelse är tillgänlig pĺ web addressen:
http://www.sharp.de/doc/DK-KP85PH.pdf
●
●
Con la presente SHARP Electronics dichiara che questo
SHARP Sistema Micro DK-KP85PH č con-forme ai requisiti
essenziali ed alle altre disposizioni pertinenti stabilite dalla
direttiva 1999/5/CE. La dichiarazione di conformitŕ puň
essere consultata sul sito:
http://www.sharp.de/doc/DK-KP85PH.pdf
Dichiarazione di conformità
La società SHARP ELECTRONICS dichiara che il prodotto
DK-KP85PH Sistema micro è costruito in conformità alle
prescrizioni del D.M.no 548 del 28/8/95, pubblicato sulla
G.U.no 301 del 28/12/95 ed in particolare è conforme a
quanto indicato nell’art. 2, comma 1 dello stesso decreto.
●
●
Hierbij verklaart SHARP Electronics dat het toestel SHARP
Slim Micro Systeem DK-KP85PH in overeenstemming is
met de essentiële eisen en de andere relevante bepalingen
van richtlijn 1999/5/EG. De overeen-stemmingsverkiaring is
beschikbaar op:
http://www.sharp.de/doc/DK-KP85PH.pdf
●
Eu, SHARP Electronics, declaro que o SHARP Sistema Micro
Super Leve DK-KP85PH cumpre os requisitos essenciais
e outras provisőes relevantes da Directiva 1999/5/EC. A
Declaraçăo de conformidade pod ser consultada em:
http://www.sharp.de/doc/DK-KP85PH.pdf
●
SHARP Electronics vakuuttaa täten että SHARP Micro Stereo
Järjestelmä DK-KP85PH tyyppinen laite on direktiivin 1999/5/
EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden
ehtojen mukainen. Vakuutus on nähtävissä osoitteessa:
http://www.sharp.de/doc/DK-KP85PH.pdf
●
Hereby, SHARP Electronics declares that this SHARP
Slim Micro System DK-KP85PH is in compliance with the
essential requirements and other relevant provisions of
Directive 1999/5/EC. The declaration of conformity may be
consulted at:
http://www.sharp.de/doc/DK-KP85PH.pdf
●
Bei Einstellung der ON/STAND-BY-Taste auf STAND-BY ist
die Netzspannung immer noch im Gerät vorhanden.
Wenn die ON/STAND-BY-Taste auf STAND-BY eingestellt
wird, kann das Gerät unterVerwendung derTimer-Betriebsart
oder Fernbedienung in Betrieb gesetzt werden.
Warnung:
In diesem Gerät sind keine vom Benutzer wartbaren Teile
vorhanden. Niemals Abdeckungen entfernen, außer wenn
Sie dafür qualifiziert sind. In diesem Gerät sind gefährliche
Spannungen vorhanden. Vor Ausführung von irgendwelchen
Kundendienstarbeiten oder bei längerer Nichtverwendung
des Gerätes stets den Netzstecker aus der Netzsteckdose
ziehen.
●
Lorsque la touche ON/STAND-BY est mise en STAND-BY,
l’appareil est toujours sous tension.
Lorsque la touche ON/STAND-BY se trouve sur la position
STAND-BY, l’appareil est prêt à fonctionner par la minuterie
ou la télécommande.
Avertissement:
Cet appareil contient des pièces non réparables par
l’utilisateur. Personne non qualifiée n’enlèvera jamais les
couvercles. L’appareil contenant des organes portés à haute
tension, débrancher l’appareil avant toute réparation ou en
période de non-utilisation.
●
Cuando el botón ON/STAND-BY está puesto en la posición
STAND-BY, todavía hay tensión dentro del aparato.
Cuando el botón ON/STAND-BY está puesto en la posición
STAND-BY, el aparato puede ponerse en funcionamiento
utilizando el modo del temporizador o el controlador remoto.
Advertencia:
Tenga en cuenta que dentro de este aparato no hay piezas
que pueda reparar. No quite nunca las tapas a menos que
se esté cualificado para hacerlo. Este aparato tiene en su
interior tensiones peligrosas. Desenchufe siempre la clavija
de la red del tomacorriente antes de realizar cusalquier
servicio de mantenimiento y cuando no se use el aparato
durante un largo período de tiempo.
●
När ON/STAND-BY knappen är i läge STAND-BY, finns
nätspänning i apparaten.
Med ON/STAND-BY knappen i läge STAND-BY kan
apparaten startas med timerfunktion eller fjärrkontrollen.
Varning:
Apparaten innehĺller inga delar som kan ĺtgärdas av kunden.
Höljet fĺr endast öppnas av kvalificerad personal. Apparaten
innehĺller farliga spänningar. Stickkontakten ska därför dras
ut frĺn nätuttaget före reparationsarbeten och bör dras ut om
apparaten inte ska användas pĺ mycket länge.
●
Quando il tasto ON/STAND-BY si trova in posizione STAND-
BY, all’interno dell’apparecchio c’è ancora la corrente.
Se il tasto ON/STAND-BY si trova nella posizione STAND-
BY, l’unità puň essere accesa con il modo timer o con il
telecomando.
Avvertenza:
L’apparecchio non contiene parti riparabili dall’utente. Non
togliere mai i coperchi, a meno di non essere qualificati
per farlo. All’interno dell’apparecchio ci sono tensioni
pericolose, per cui si deve sempre staccare la spina del
cavo d’alimentazione dalla presa di corrente prima di
qualsiasi intervento di manutenzione e quando non si usa
l’apparecchio per un lungo periodo di tempo.
●
DK-KP85_COMMON.indd iDK-KP85_COMMON.indd i 2013-05-21 10:16:282013-05-21 10:16:28

ii
Wanneer de ON/STAND-BY toets in de STAND-BY stand staat,
loopt er nog steeds stroom (netspanning) in het toestel.
Wanneer de ON/STAND-BY toets in de STAND-BY stand
staat, kan het toestel ingeschakeld worden via de timerfunctie
of de afstandsbediening.
Waarschuwing:
Dit toestel bevat geen door de gebruiker te repareren
onderdelen. Verwijder de behuizing nooit tenzij u deskundig
bent op dit gebied. In het toestel loopt een gevaarlijke
spanning; haal de stekker altijd uit het stopcontact alvorens
onderhoud uit te voeren of wanneer het toestel voor langere
tijd niet gebruikt wordt.
●
Quando o botăo ON/STAND-BY estiver ajustado na posiçăo
STAND-BY, a voltagem de alimentaçăo ainda se encontra
presente dentro do aparelho.
Quando o botăo ON/STAND-BY estiver ajustado na posiçăo
STAND-BY, o aparelho pode ser colocado em operaçăo através
do modo de programaçăo horária ou pelo controle remoto.
Advertência:
Neste aparelho năo há partes que podem ser consertadas
pelo usuário. Nunca retire a tampa, a menos que você
tenha qualificaçăo para tal. Este aparelho contém voltagens
perigosas. Remova sempre o cabo de alimentaçăo da
tomada antes de efetuar qualquer conserto ou quando
deixar o aparelho muito tempo fora de uso.
●
Kun ON/STAND-BY -kytkin on STAND-BY-asennossa,
laitteessa on yhä virta.
Kun ON/STAND-BY -kytkin on STAND-BY-asennossa, laite
voidaan kytkeä päälle kaukosäätimestä.
Varoitus:
Laitteen sisällä ei ole käyttäjän huollettavissa olevia osia.
Kotelon saa irrottaa vain siihen pätevöitynyt henkilö. Laitteen
sisällä on vaarallinen jännite. Laite on aina irrotettava
verkkovirrasta ennen huoltotoimenpiteitä ja jos laite on
pitkään käyttämättä.
●
When the ON/STAND-BY button is set at STAND-BY position,
mains voltage is still present inside the unit.
When the ON/STAND-BY button is set at STAND-BY position,
the unit may be brought into operation by the timer mode or
remote control.
Warning:
This unit contains no user serviceable parts. Never remove
covers unless qualified to do so.This unit contains dangerous
voltages, always remove mains plug from the socket before
any service operation and when not in use for a long period.
●
Nĺr ON/STAND-BY-knappen er sat i STAND-BY positionen, er
der stadig netspaending til stede i apparatet.
Nĺr ON/STAND-BY-knappen er sat i STAND-BY position,
kan apparatet startes v.hj.a. timer-funksionen eller
fjernbetjeningen.
Advarsel:
Apparatet indeholder ingen dele, der kan repareres af
brugeren selv. Fjern aldrig kabinettet med mindre De er
kvalificeret hertil. Apparatet indeholder farlig strřmspaending.
Traek altid stikket ud af stikkontakten fřr der foretages
reparationer, eller hvis apparatet ikke er i brug i laengere tid.
●
DENNA APPARAT ÄR ANSLUTEN TILL 230 V
VÄXELSTRÖM NÄR STICKPROPPEN ÄR
INSKJUTEN I VÄGGUTTAGET. FÖR ATT
FULLSTÄNDIGT KOPPLA IFRÅN APPARATEN,
V.G. DRAG UT STICKPROPPEN.
Audio-visuelles Material kann Urheberrechte
umfassen, die ohne Genehmigung des Eigentümers
dieser Urheberrechte nicht aufgenommen werden
dürfen. Siehe die entsprechenden nationalen Gesetze.
●
Le matériel audio-visuel peut comporter des oeuvres
faisant l’objet de droits d’auteur qui ne peuvent être
enregistrées sans l’autorisation du possesseur du droit
d’auteur, veuillez vous référer aux réglementations
nationales en vigueur.
●
El material audiovisual puede consistir en trabajos que
tengan derechos de autor y que no deben grabarse
sin la autorización del poseedor de dichos derechos
de autor. Sírvase consultar las leyes aplicables en su
país.
●
Audiovisuelltmaterialkaninnehĺllaupphovsrättsarbete
som inte skall mĺngfaldigas utan tillstĺnd av
copyrightinnehavaren. Se den tillämpliga lagen i ditt
land
.
●
Il materiale audio-visivo che fosse soggetto a copyright
non puň essere registrato senza l’autorizzazione del
possessore del copyright. Si prega di attenersi alle
leggi in vigore sul territorio nazionale.
●
Audio-visueel materiaal kan worden beschermd
door auteursrechten, in welk geval het niet mag
worden opgenomen zonder de toestemming van de
auteursrechthouder. Zie voor nadere informatie de
betreffende wetten in het land van gebruik.
●
O material audiovisual pode consistir de trabalhos
de direitos autorias que năo devem ser gravados
sem autorizaçăo do proprietário dos direitos. Favor
consultar as leis vigentes em seu país.
●
Audiovisuaalinen materiaali saattaa olla tekijänoikeudella
suojattua,eikäsitä tällöinsaatallentaa ilmantekijänoikeuden
haltijan lupaa. Lisätietoja on maassasi sovellettavassa
tekijänoikeuslaissa.
●
Audio-visual material may consist of copyrighted works
which must not be recorded without the authority of
the owner of the copyright. Please refer to relevant law
in your country.
●
DK-KP85_COMMON.indd iiDK-KP85_COMMON.indd ii 2013-05-21 10:16:432013-05-21 10:16:43

iii
Vorsicht:
Das Gerät weder Tropf- noch Spritzwasser aussetzen.
Ansonsten besteht die Gefahr eines Brandes oder
elektrischen Schlages. Es dürfen keine mit Flüssigkeiten
gefüllten Gegenstände wie Vasen auf dem Gerät
abgestellt werden.
●
Attention:
Pour éviter un incendie ou une secousse électrique,
mettre l’appareil à l’abri de l’eau (éclaboussure, goutte).
Ne pas poser sur l’appareil un récipient contenant du
liquide.
●
Advertencia:
Para evitar incendios y descargas eléctricas, no exponga
el aparato a goteo o salpicadura de líquidos. No deberán
ponerse encima del aparato objetos que estén llenos de
líquido, como por ejemplo un florero.
●
Varning:
Utsätt inte enheten för dropp eller stänk för att
förhindra brand eller elektriska stötar. Inga vätskefyllda
föremĺl sĺsom vaser fĺr placeras pĺ enheten.
●
Attenzione:
Per prevenire incendi o scosse elettriche, non fare
gocciolare nessun liquido sull’apparecchio e non
bagnarlo. Non collocarvi sopra nessun oggetto
riempito d’acqua, come per esempio vasi.
●
Waarschuwing:
Stel het toestel niet bloot aan druipend of spattend
water om brand en elektrische schokken te voorkomen.
Met vloeistoffen gevulde voorwerpen, zoals vazen,
mogen niet op het toestel geplaatst worden.
●
Cuidado:
Para evitar incêndio ou choque elétrico, năo exponha
este aparelho a gotejamento ou salpicamento de
água. Năo coloque objetos com água como, por
exemplo, um vaso de flores, em cima do aparelho.
●
Varoitus:
Tulipalon tai sähköiskun välttämiseksi laitetta ei saa
altistaa tippuvalle tai roiskuvalle vedelle. Nestettä
sisältäviä astioita kuten esim kukkamaljakoita ei saa
asettaa laitteen päälle.
●
Warning:
To prevent fire or shock hazard, do not expose this
appliance to dripping or splashing. No objects filled
with liquids, such as vases, shall be placed on the
apparatus.
●
Advarsel:
Tilatforbyggeildogstřdrisiko,lad vaeremedat undsaette
denne indretning for drypning eller overstaenkning. Der
mĺ ikke anbringes nogen genstande fyldt med vand,
som for eksempel vaser, pĺ dette apparat
.
●
Advarsel:
For ĺ unngĺ brann eller kortslutning, utsett ikke produktet
for vann eller fuktighet. Gjenstander som inneholder
vaeske, feks. en blomstervase, mĺ ikke plasseres oppĺ
apparatet.
●
Varoitus:
Älä vie laitetta sateeseen tai kosteisiin tiloihin. Jos
laite on kostunut, anna sen kuivua ennen kuin käytät
sitä verkkovirralla. Nestettä sisältäviä astioita kuten
esim. kukkamaljakoita ei saa asettaa laitteen päälle.
●
Dieses Produkt ist ein Laserprodukt der Klasse 1.●
Ce produit est classifié comme étant un LASER DE
CLASSE 1.
●
Este producto está clasificado como un PRODUCTO
LÁSER DE CLASE 1.
●
Denna produkt klassificeras som KLASS 1 LASERPRODUKT. ●
Questo prodotto è classificato come CLASS 1 LASER
PRODUCT.
●
Dit product is geclassificeerd als een KLASSE 1
LASER PRODUCT.
●
Este produto é classificado como PRODUTO LASER
DE CLASSE 1.
●
Tämä laite on luokiteltu LUOKAN 1 LASERLAITTEEKSI. ●
This product is classified as a CLASS 1 LASER
PRODUCT.
●
VORSICHT
Dieses Gerät enthält Laser-Gerät geringer Leistung.
Um nachhaltige Sicherheit zu gewährleisten entfernen
Sie kein Gehäuse und versuchen Sie nicht Zugang zum
Inneren des Produktes zu erhalten. Wenden Sie sich bei
auftretenden Servicefällen immer an Fachpersonal.
●
ATTENTION
Ce produit contient un dispositif laser de puissance
inférieure. Pour assurer une sécurité continue ne retirez
pas le cache et n’essayez pas d’accéder l’intérieur du
produit. Tout entretien doit etre fait par du personnel
qualifié.
●
PRECAUCIÓN
Este producto contiene un dispositivo láser de potencia
más baja. Para garantizar una continua seguridad, no retire
ninguna cubierta ni intente acceder al interior del producto.
Solicite el servicio de personal cualificado.
●
OBSERVERA
Denna produkt innehaller en svagströmslaser. För
att säkerställa fortsatt säkerhet ta inte bort nagot
hölje eller försök fa tillgang till insidan av produkten.
Överlat alla servicearbeten at kvalificerad personal.
●
DK-KP85_COMMON.indd iiiDK-KP85_COMMON.indd iii 2013-05-21 10:16:432013-05-21 10:16:43

iv
ATTENZIONE
LQuesto prodotto contiene un dispositivo laser a bassa
potenza. Per garantire una sicurezza continua, non togliete
alcuna protezione e non cercate di accedere all’interno
del prodotto. Fate sempre riferimento ad un personale
qualificato.
●
LET OP
Dit product bevat een Lagervermogen-laser apparaat.
Om een voortdurende veiligheid te waarborgen verwijder
geen enkele beschermkap of probeer toegang te krijgen
tot het binnenste van het apparaat. Laat alle reparaties
over aan bevoegd personeel.
●
CUIDADO
Este produto contém um dispositivo laser de baixa
potencia. Para assegurar uma segurança contínua nao
remova nenhuma capa nem tente aceder ao interior do
produto. Remeta todo o tipo de manutençao para pessoal
qualificado.
●
VAROITUS
Tämä tuote sisältää laser-juovapyyhkäisylaitteen.
Varmistaakseen turvallisuutta älä poista kantta äläkä yritä
korjata laitetta itse.Jätä huolto pätevän huoltohenkilön
tehtäväksi.
●
CAUTION
This product contains a lower power laser device. To
ensure continued safety do not remove any cover or
attempt to gain access to the inside of the product. Refer
all servicing to qualified personnel.
●
„Made for iPod“, „Made for iPhone“ und „Made for iPad“ bedeutet,
dass ein elektronisches Zubehörteil speziell für den Anschluss an
einen iPod, iPhone oder iPad konzipiert wurde und der Entwickler
sich dafür verbürgt, dass das Gerät den Leistungsstandards
von Apple entspricht. Apple ist nicht verantwortlich für den
Betrieb dieses Gerätes oder dafür, dass es Sicherheits- und
Regulierungsstandards einhält. Bitte beachten Sie, dass die
Nutzung dieses Zubehörteils mit einem iPod oder iPhone zu einer
Beeinträchtigung der drahtlosen Leistung führen kann.
Les termes « Made for iPod » , « Made for iPhone » et « Made for iPad
» indiquent qu’un accessoire électronique a été spécifiquement
conçu pour se raccorder respectivement à un iPod, iPhone ou
iPad, et satisfait, sous certification du développeur, aux normes
de performance d’Apple. Apple n’est pas responsable de l’emploi
de cet appareil ni de sa conformité aux normes réglementaires et
de sécurité. Veuillez noter que l’utilisation de cet accessoire avec
l’iPod ou l’iPhone peut affecter les performances sans fil.
“Made for iPod”, “Made for iPhone” y “Made for iPad” significa
que se ha diseñado un accesorio electrónico para conectar
específicamente al iPod, iPhone o iPad, respectivamente,
y el fabricante ha certificado que cumple con las normas
de desempeño de Apple. Apple no se responsabiliza por el
funcionamiento de este dispositivo ni por su cumplimiento con
las normas de seguridad y regulatorias. Tenga en cuenta que el
uso de este accesorio con el iPod o el iPhone puede afectar el
funcionamiento del inalámbrico.
”Made for iPod”, ”Made for iPhone” och ”Made for iPad” innebär
att ett elektroniskt tillbehör har designats för att kopplas specifikt
till en iPod, iPhone eller iPad och har certifierats av utvecklaren
för att tillfredsställa Apples prestandanormer. Apple ansvarar inte
för användning av denna apparat eller dess överensstämmelse
med säkerhetsnormer och föreskrifter. Observera att användning
av detta tillbehör med iPod eller iPhone kan påverka den trådlösa
prestandan.
“Made for iPod”, “Made for iPhone” e “Made for iPad” significano
che un accessorio elettronico è stato progettato per essere
specificamente collegato iPod, iPhone o iPad, rispettivamente;
inoltre, il produttore ne ha certificato la conformità agli standard
di funzionamento Apple. Apple non si ritiene responsabile circa il
funzionamento del presente dispositivo o la sua conformità con
gli standard normativi e relativi alla sicurezza. L’utilizzo di questo
accessorio con iPod o iPhone potrebbe influire sulle prestazioni
wireless.
„Made for iPod”, „Made for iPhone” en „Made for iPad” betekent
dat een electronische accessoire ontworpen is om specifiek
aangesloten te worden op de iPod, iPhone of iPad respectievelijk
en gecertificeerd is door de ontwerper om aan de Apple prestatie
maatstaven te voldoen. Apple is niet verantwoordelijk voor de
werking van dit apparaat of zijn naleving aan veiligheids- en
regelgevende maatstaven. Realiseer u, dat het gebruik van dit
accessoire een negatieve invloed kan hebben op draadloos
gebruik van uw iPod of iPhone.
A indicação “Made for iPod”, “Made for iPhone” e “Made for iPad”
significa que um acessório electrónico foi concebido para se
ligar especificamente ao iPod, iPhone ou iPad, respectivamente,
e foi certificado pelo fabricante para satisfazer os padrões
de desempenho da Apple. A Apple não é responsável pelo
funcionamento deste aparelho ou pelo cumprimento das normas
de segurança e regulamentares. De salientar que o uso deste
acessório com o iPod ou iPhone pode afectar o desempenho
sem fios.
”Made for iPod”, ”Made for iPhone” ja ”Made for iPad” tarkoittavat
sitä, että elektroninen lisälaite on suunniteltu nimenomaisesti iPod,
iPhone tai iPad.Valmistaja on sertifioinut laitteen niin, että se vastaa
Applen standardeja. Apple ei ole vastuussa laitteen toiminnasta
tai sen yhdenmukaisuudesta turvallisuus- ja sääntelystandardien
kanssa. Huomaa, että tämän lisälaitteen käyttö iPodin tai iPhonen
kanssa saattaa vaikuttaa langattoman verkon toimintaan.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean
that an electronic accessory has been designed to connect
specifically to iPod, iPhone, or iPad, respectively, and has been
certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards. Please note
that the use of this accessory with iPod, iPhone, or iPad may
affect wireless performance.
DK-KP85_COMMON.indd ivDK-KP85_COMMON.indd iv 2013-05-21 10:16:432013-05-21 10:16:43

v
Die Wortmarke Bluetooth® und die zugehörigen Logos sind
Eigentum der Bluetooth SIG, Inc. und werden von SHARP
unterLizenz verwendet. Andere Marken und Produktnamen
sind Eigentum der jeweiligen Rechteinhaber.
Le mot et les logos Bluetooth® sont des marques
commerciales enregistrées par Bluetooth SIG, Inc. et toute
utilisation de ces marques par SHARP est faite sous licence.
Les autres marques et noms commerciaux appartiennent à
leurs propriétaires respectifs.
La marca denominativa y los logotipos Bluetooth® son
marcas comerciales registradas propiedad de Bluetooth
SIG, Inc. y cualquier uso de dichas marcas por SHARP es
bajo licencia. El resto de marcas registradas y nombres
comerciales son de sus propietarios respectivos.
Bluetooth®-varumärket och logotyperna är registrerade
varumärken som tillhör Bluetooth SIG, Inc. och all
användning av sådana märken av SHARP sker under licens.
Andra varumärken och varunamn tillhör deras respektive
ägare.
La parola-marchio Bluetooth® e i loghi sono marchi
registrati di possesso della Bluetooth SIG, Inc. e qualunque
utilizzo di questi marchi da parte di SHARP è sotto licenza.
Altri marchi e nomi commerciali sono dei relativi proprietari.
Het Bluetooth® woordmerk en logo’s zijn geregistreerde
handelsmerken eigendom van Bluetooth SIG, Inc. en
gebruik van dergelijke merken door SHARP is onder licentie.
Andere handelsmerken en handelsnamen zijn van hun
respectievelijke eigenaren.
A marca e logo Bluetooth® são marcas registadas
propriedade da Bluetooth SIG, Inc. e o uso de tais marcas
pela SHARP é feito mediante licença. Outras marcas
e nomes de marcas pertencem aos seus legítimos
proprietários.
Bluetooth®-sanamerkki ja logot ovat Bluetooth-SIG, Inc.
-yhtiön omistamia tavaramerkkejä ja kaikkien SHARPIN
tällaisten merkkien käyttö on lisenssin alaista. muut
tavaramerkit ja kauppamerkit ovat vastaavien omistajiensa
omaisuutta.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by SHARP is under license. Other trademarks
and trade names are those of their respective owners.
DK-KP85_COMMON.indd vDK-KP85_COMMON.indd v 2013-05-21 10:16:432013-05-21 10:16:43

vi
Entsorgungsinformationen
Achtung:
Ihr Produkt
trägt dieses
Symbol. Es
besagt, dass
Elektro- und
Elektronik-
gerä-te nicht
mit dem
Haus-
haltsmüll
entsorgt,
sondern
einem
getrennten
Rücknah-
me- system
zugeführt
werden
sollten.
A. Entsorgungsinformationen für Benutzer aus Privathaushalten
1. In der Europäischen Union
Achtung: Werfen Sie dieses Gerät zur Entsorgung bitte nicht in den
normalen Hausmüll!
Gemäß einer neuen EU-Richtlinie, die die ordnungsgemäße
Rücknahme, Behandlung und Verwertung von gebrauchten
Elektro- und Elektronikgeräten vorschreibt, müssen elektrische und
elektronische Altgeräte getrennt entsorgt werden.
Nach der Einführung der Richtlinie in den EU-Mitgliedstaaten können
Privathaushalte ihre gebrauchten Elektro- und Elektronikgeräte nun
kostenlos an ausgewiesenen Rücknahmestellen abgeben*.
In einigen Ländern* können Sie Altgeräte u.U. auch kostenlos bei
Ihrem Fachhändler abgeben, wenn Sie ein vergleichbares neues
Gerät kaufen.
*) Weitere Einzelheiten erhalten Sie von Ihrer Gemeindeverwaltung.
Wenn Ihre gebrauchten Elektro- und Elektronikgeräte Batterien
oder Akkus enthalten, sollten diese vorher entnommen und gemäß
örtlich geltenden Regelungen getrennt entsorgt werden.
Durch die ordnungsgemäße Entsorgung tragen Sie dazu bei,
dass Altgeräte angemessen gesammelt, behandelt und verwertet
werden. Dies verhindert mögliche schädliche Auswirkungen auf
Umwelt und Gesundheit durch eine unsachgemäße Entsorgung.
2. In anderen Ländern außerhalb der EU
Bitte erkundigen Sie sich bei Ihrer Gemeindeverwaltung nach dem
ordnungsgemäßenVerfahren zur Entsorgung dieses Geräts.
Für die Schweiz: Gebrauchte Elektro- und Elektronikgeräte können
kostenlos beim Händler abgegeben werden, auch wenn Sie kein
neues Produkt kaufen. Weitere Rücknahmesysteme finden Sie auf
der Homepage von www.swico.ch oder www.sens.ch.
B. Entsorgungsinformationen für gewerbliche Nutzer
1. In der Europäischen Union
Wenn Sie dieses Produkt für gewerbliche Zwecke genutzt haben
und nun entsorgen möchten:
Bitte wenden Sie sich an Ihren SHARP Fachhändler, der Sie über
die Rücknahme des Produkts informieren kann. Möglicherweise
müssen Sie die Kosten für die Rücknahme und Verwertung tragen.
Kleine Produkte (und kleine Mengen) können möglicherweise bei
Ihrer örtlichen Rücknahmestelle abgegeben werden.
Für Spanien: Bitte wenden Sie sich an das vorhandene
Rücknahmesystem oder Ihre Gemeindeverwaltung, wenn Sie
Fragen zur Rücknahme Ihrer Altgeräte haben.
2. In anderen Ländern außerhalb der EU
Bitte erkundigen Sie sich bei Ihrer Gemeindeverwaltung nach dem
ordnungsgemäßenVerfahren zur Entsorgung dieses Geräts.
Informations sur la mise au rebut correcte
Attention:
votre produit
comporte ce
symbole. Il
signifie que
les produits
électriques
et électroni-
ques usagés
ne doivent
pas être mé-
langés avec
les déchets
ménagers
généraux.
Un système
de collecte
séparé est
prévu pour
ces produits.
A. Informations sur la mise au rebut à l’intention des utilisateurs
privés (ménages)
1. Au sein de l’Union européenne
Attention : si vous souhaitez mettre cet appareil au rebut, ne le jetez
pas dans une poubelle ordinaire!
Les appareils électriques et électroniques usagés doivent être traités
séparément et conformément aux lois en vigueur en matière de traitement,
de récupération et de recyclage adéquats de ces appareils.
Suite à la mise en oeuvre de ces dispositions dans les Etats membres,
les ménages résidant au sein de l’Union européenne peuvent désormais
ramener gratuitement* leurs appareils électriques et électroniques usagés
sur des sites de collecte désignés.
Dans certains pays*, votre détaillant reprendra également gratuitement
votre ancien produit si vous achetez un produit neuf similaire.
*)Veuillez contacter votre administration locale pour plus de renseignements.
Si votre appareil électrique ou électronique usagé comporte des piles
ou des accumulateurs, veuillez les mettre séparément et préalablement
au rebut conformément à la législation locale en vigueur.
En veillant à la mise au rebut correcte de ce produit, vous contribuerez
à assurer le traitement, la récupération et le recyclage nécessaires de
ces déchets, et préviendrez ainsi les effets néfastes potentiels de leur
mauvaise gestion sur l’environnement et la santé humaine.
2. Pays hors de l’Union européenne
Si vous souhaitez mettre ce produit au rebut, veuillez contacter votre
administration locale qui vous renseignera sur la méthode d’élimination
correcte de cet appareil .
Suisse : les équipements électriques ou électroniques usagés peuvent
être ramenés gratuitement au détaillant, même si vous n’achetez pas
un nouvel appareil. Pour obtenir la liste des autres sites de collecte,
veuillez vous reporter à la page d’accueil du site www.swico.ch ou
www.sens.ch.
B. Informations sur la mise au rebut à l’intention des entreprises
1. Au sein de l’Union européenne
Si ce produit est utilisé dans le cadre des activités de votre entreprise
et que vous souhaitiez le mettre au rebut:
Veuillez contacter votre revendeur SHARP qui vous informera des
conditions de reprise du produit. Les frais de reprise et de recyclage
pourront vous être facturés. Les produits de petite taille (et en petites
quantités) pourront être repris par vos organisations de collecte locales.
Espagne: veuillez contacter l’organisation de collecte existante ou votre
administration locale pour les modalités de reprise de vos produits usagés.
2. Pays hors de l’Union européenne
Si vous souhaitez mettre ce produit au rebut, veuillez contacter votre
administration locale qui vous renseignera sur la méthode d’élimination
correcte de cet appareil.
Información sobre la eliminación
Atención:
su producto
está marca-
do con este
símbolo. Sig-
nifica que los
productos
eléctricos y
electrónicos
usados no
deberían
mezclarse
con los
residuos
domésticos
generales.
Existe un
sistema de
recogida
independien-
te para estos
productos
A. Información sobre eliminación para usuarios particulares
1. En la Unión Europea
Atención: si quiere desechar este equipo, ˇpor favor no utilice el
cubo de la basura habitual!
Los equipos eléctricos y electrónicos usados deberían tratarse por
separado de acuerdo con la legislación que requiere un tratamiento,
una recuperación y un reciclaje adecuados de los equipos eléctricos
y electrónicos usados.
Tras la puesta en práctica por parte de los estados miembros, los
hogares de particulares dentro de los estados de la Unión Europea
pueden devolver sus equipos eléctricos y electrónicos a los centros
de recogida designados sin coste alguno *.
En algunos países* es posible que también su vendedor local se lleve
su viejo producto sin coste alguno si Ud. compra uno nuevo similar.
*) Por favor, póngase en contacto con su autoridad local para obtener
más detalles.
Si sus equipos eléctricos o electrónicos usados tienen pilas o acumuladores,
por favor deséchelos por separado con antelación según los requisitos
locales.
Al desechar este producto correctamente, ayudará a asegurar que
los residuos reciban el tratamiento, la recuperación y el reciclaje
necesarios, previniendo de esta forma posibles efectos negativos
en el medio ambiente y la salud humana que de otra forma podrían
producirse debido a una manipulación de residuos inapropiada.
2. En otros países fuera de la Unión Europea
Si desea desechar este producto, por favor póngase en contacto
con las autoridades locales y pregunte por el método de eliminación
correcto.
Para Suiza: Los equipos eléctricos o electrónicos pueden devolverse
al vendedor sin coste alguno, incluso si no compra ningún nuevo
producto. Se puede encontrar una lista de otros centros de recogida
en la página principal de www.swico.ch o www.sens.ch.
B. Información sobre Eliminación para empresas usuarias
1. En la Unión Europea
Si el producto se utiliza en una empresa y quiere desecharlo:
Por favor póngase en contacto con su distribuidor SHARP, quien le informará
sobre la recogida del producto. Puede ser que le cobren los costes de
recogida y reciclaje. Puede ser que los productos de tamańo pequeńo (y las
cantidades pequeńas) sean recogidos por sus centros de recogida locales.
Para Espańa: por favor, póngase en contacto con el sistema de recogida establecido
o con las autoridades locales para la recogida de los productos usados.
2. En otros países fuera de la Unión Europea
Si desea desechar este producto, por favor póngase en contacto con sus
autoridades locales y pregunte por el método de eliminación correcto.
Information om återvinning
OBS! Produk-
ten är märkt
med sym-
bolen ovan.
Denna symbol
indikerar att
elektroniska
produkter inte
ska kastas i
det vanliga
hushĺllsavfallet
eftersom
det finns
ett separat
avfallshante-
rings-system
för dem.
A. Information om ĺtervinning av elektrisk utrustning för hushĺll
1. EU-länder
OBS! Kasta inte denna produkt i soporna!
Förbrukad elektrisk utrustning mĺste hanteras i enlighet med
gällande miljölagstiftning och ĺtervinningsföreskrifter.
I enlighet med gällande EU-regler ska hushĺll ha möjlighet att lämna
in elektrisk utrustning till ĺtervinningsstationer utan kostnad.*
I vissa länder* kan det även hända att man gratis kan lämna in gamla
produkter till ĺterförsäljaren när man köper en ny liknande enhet.
*) Kontakta kommunen för vidare information.
Om utrustningen innehĺller batterier eller ackumulatorer ska dessa
först avlägsnas och hanteras separat i enlighet med gällande
miljöföreskrifter.
Genom att hantera produkten i enlighet med dessa föreskrifter
kommer den att tas om hand och ĺtervinnas pĺ tillämpligt sätt, vilket
förhindrar potentiella negativa hälso- och miljöeffekter.
2. Länder utanför EU
Kontakta de lokala myndigheterna och ta reda pĺ gällande
sorterings- och ĺtervinningsföreskrifter om du behöver göra dig av
med denna produkt.
B. Information om ĺtervinning för företag
1. EU-länder
Gör sĺ här om produkten ska kasseras:
Kontakta SHARPs ĺterförsäljare för information om hur man gĺr till
väga för att lämna tillbaka produkten. Det kan hända att en avgift för
transport och ĺtervinning tillkommer. Mindre skrymmande produkter
(om det rör sig om ett fĺtal) kan eventuellt ĺterlämnas till lokala
ĺtervinningsstationer.
2. Länder utanför EU
Kontakta de lokala myndigheterna och ta reda pĺ gällande
sorterings- och ĺtervinningsföreskrifter om du behöver göra dig av
med denna produkt.
DK-KP85_COMMON.indd viDK-KP85_COMMON.indd vi 2013-05-21 10:16:432013-05-21 10:16:43

vii
Informazioni per un corretto smaltimento
Attenzione: Il
dispositivo è
contras-
segnato
da questo
simbolo, che
segnala di
non smaltire
le appa-
recchiature
elettriche ed
elettroniche
insieme ai
normali rifiuti
domestici.
Per tali
prodotti è
previsto un
sistema di
raccolta a
parte.
A. Informazioni sullo smaltimento per gli utenti (privati)
1. Nell’Unione europea
Attenzione: Per smaltire il presente dispositivo, non utilizzare il
normale bidone della spazzatura!
Le apparecchiature elettriche ed elettroniche usate devono essere
gestite a parte e in conformità alla legislazione che richiede il
trattamento, il recupero e il riciclaggio adeguato dei suddetti
prodotti.
In seguito alle disposizioni attuate dagli Stati membri, i privati
residenti nella UE possono conferire gratuitamente le apparecchiature
elettriche ed elettroniche usate a centri di raccolta designati*.
In alcuni paesi*, anche il rivenditore locale puň ritirare gratuitamente
il vecchio prodotto se l’utente acquista un altro nuovo di tipologia
simile.
*) Per maggiori informazioni si prega di contattare l’autorità locale
competente.
Se le apparecchiature elettriche o elettroniche usate hanno batterie
o accumulatori, l’utente dovrà smaltirli a parte preventivamente in
conformità alle disposizioni locali.
Lo smaltimento corretto del presente prodotto contribuirà a
garantire che i rifiuti siano sottoposti al trattamento, al recupero e
al riciclaggio necessari prevenendone il potenziale impatto negativo
sull’ambiente e sulla salute umana, che potrebbe derivare da
un’inadeguata gestione dei rifiuti.
2. In paesi che non fanno parte dell’UE
Se si desidera eliminare il presente prodotto, contattare le autorità
locali e informarsi sul metodo di smaltimento corretto.
Per la Svizzera: Le apparecchiature elettriche o elettroniche usate
possono essere restituite gratuitamente al rivenditore, anche se non
si acquista un prodotto nuovo. Altri centri di raccolta sono elencati
sulle homepage di www.swico.ch o di www.sens.ch.
B. Informazioni sullo smaltimento per gli utenti commerciali
1. Nell’Unione europea
Se il prodotto è impiegato a scopi commerciali, procedere come
segue per eliminarlo.
Contattare il proprio rivenditore SHARP che fornirà informazioni
circa il ritiro del prodotto. Potrebbero essere addebitate le spese
di ritiro e riciclaggio. Prodotti piccoli (e quantitativi ridotti) potranno
essere ritirati anche dai centri di raccolta locali.
Per la Spagna: Contattare il sistema di raccolta ufficiale o l’ente
locale preposto al ritiro dei prodotti usati.
2. In paesi che non fanno parte dell’UE
Se si desidera eliminare il presente prodotto, contattare le autorità
locali e informarsi sul metodo di smaltimento corretto.
Informatie over verantwoorde verwijdering
Let op: Uw
product
is van dit
merkteken
voorzien. Dit
betekent dat
afgedankte
elektrische
en elek-
tronische ap-
paratuur niet
samen met
het normale
huisafval
mogen wor-
den weg-
gegooid. Er
bestaat een
afzonderlijk
inzamelings-
systeem
voor deze
producten.
A. Informatie over afvalverwijdering voor gebruikers (particuliere
huishoudens)
1. In de Europese Unie
Let op: Deze apparatuur niet samen met het normale huisafval
weggooien!
Afgedankte elektrische en elektronische apparatuur moet gescheiden
worden ingezameld conform de wetgeving inzake de verantwoorde
verwerking, terugwinning en recycling van afgedankte elektrische en
elektronische apparatuur.
Na de invoering van de wet door de lidstaten mogen particuliere
huishoudens in de lidstaten van de Europese Unie hun afgedankte
elektrische en elektronische apparatuur kosteloos* naar hiertoe
aangewezen inzamelingsinrichtingen brengen*.
In sommige landen* kunt u bij de aanschaf van een nieuw apparaat
het oude product kosteloos bij uw lokale distributeur inleveren.
*) Neem contact op met de plaatselijke autoriteiten voor verdere
informatie.
Als uw elektrische of elektronische apparatuur batterijen of accumulatoren
bevat dan moet u deze afzonderlijk conform de plaatselijke voorschriften
weggooien.
Door dit product op een verantwoorde manier weg te gooien,
zorgt u ervoor dat het afval de juiste verwerking, terugwinning en
recycling ondergaat en potentiële negatieve effecten op het milieu
en de menselijke gezondheid worden voorkomen die anders zouden
ontstaan door het verkeerd verwerken van het afval.
2. In andere landen buiten de Europese Unie
Als u dit product wilt weggooien, neem dan contact op met de plaatselijke
autoriteiten voor informatie omtrent de juiste verwijderingsprocedure.
Voor Zwitserland: U kunt afgedankte elektrische en elektronische
apparatuur kosteloos bij de distributeur inleveren, zelfs als u geen
nieuw product koopt. Aanvullende inzamelingsinrichtingen zijn
vermeld op de startpagina van www.swico.ch of www.sens.ch.
B. Informatie over afvalverwijdering voor bedrijven
1. In de Europese Unie
Als u het product voor zakelijke doeleinden heeft gebruikt en als u
dit wilt weggooien:
Neem contact op met uw SHARP distributeur die u inlichtingen
verschaft over de terugname van het product. Het kan zijn dat u een
afvalverwijderingsbijdrage voor de terugname en recycling moet
betalen. Kleine producten (en kleine hoeveelheden) kunnen door de
lokale inzamelingsinrichtingen worden verwerkt.
Voor Spanje: Neem contact op met de inzamelingsinrichting of de
lokale autoriteiten voor de terugname van uw afgedankte producten.
2. In andere landen buiten de Europese Unie
Als u dit product wilt weggooien, neem dan contact op met de plaatselijke
autoriteiten voor informatie omtrent de juiste verwijderingsprocedure .
Informaçăo sobre Eliminaçăo de Produtos
Atençăo:
O seu
produto está
identificado
com este
símbolo. Sig-
nifica que
os produtos
eléctricos e
electróni-
cos năo
devem ser
misturados
com o lixo
doméstico
comum.
Existe um
sistema de
recolhas
específico
para estes
produtos.
A. Informaçőes sobre a Eliminaçăo de Produtos para os
Utilizadores (particulares)
1. Na Uniăo Europeia
Atençăo: Se quiser eliminar este equipamento, năo o deve fazer
juntamente com o lixo doméstico comum!
O equipamento eléctrico e electrónico deve ser tratado separadamente
e ao abrigo da legislaçăo aplicável que obriga a um tratamento,
recuperaçăo e reciclagem adequados de equipamentos eléctricos e
electrónicos usados .
Após a implementaçăo desta legislaçăo por parte dos Estados-
membros, todos os cidadăos residentes na Uniăo Europeia poderăo
entregar o seu equipamento eléctrico e electrónico usado em estaçőes
de recolha específicas a título gratuito*.
Em alguns países* o seu revendedor local também pode recolher o seu
equipamento usado a título gratuito na compra de um novo equipamento.
*) Contacte as entidades locais para mais informaçőes.
Se o seu equipamento eléctrico e electrónico usado funcionar a
pilhas ou baterias, deverá eliminálas em separado, conforme a
legislaçăo local, e antes de entregar o seu equipamento.
Ao eliminar este produto correctamente estará a contribuir para que
o lixo seja submetido aos processos de tratamento, recuperaçăo
e reciclagem adequados. Desta forma é possível evitar os efeitos
nocivos que o tratamento inadequado do lixo poderia provocar no
ambiente e na saúde.
2. Em outros Países fora da UE
Se quiser eliminar este produto, contacte as entidades locais e
informese sobre o método correcto para proceder à sua eliminaçăo.
Na Suíça: O equipamento eléctrico e electrónico é aceite, a título gratuito,
em qualquer revendedor, mesmo que năo tenha adquirido um novo
produto. Poderá encontrar uma lista das estaçőes de recolha destes
equipamentos na página da Web www.swicho.ch ou www.sens.ch.
B. Informaçőes sobre a Eliminaçăo de Produtos para
Utilizadores-Empresas
2. Na Uniăo Europeia
Se o produto for usado para fins comerciais e quiser eliminá-lo:
Contacte o seu revendedor SHARP que irá informá-lo sobre a melhor
forma de eliminar o produto. Poderá ter de pagar as despesas resultantes
da recolha e reciclagem do produto. Alguns produtos mais pequenos (e
em pequenas quantidades) poderăo ser recolhidos pelas estaçőes locais.
Na Espanha: Contacte o sistema de recolhas público ou as entidades
locais para mais informaçőes sobre a recolha de produtos usados.
2. Em outros Países fora da UE
Se quiser eliminar este produto, contacte as entidades locais e
informese sobre o método correcto para proceder à sua eliminaçăo.
Tietoja laitteen hävittämisestä
Huomio:
Tuote on
merkitty tällä
symbolilla.
Tämä tar-
koittaa, että
käytettyjä
sähkö- ja
elektroniik-
kalaitteita ei
saa sekoittaa
kotitalouden
yleisjätteiden
kanssa.
Näille tuot-
teille on
olemassa
erillinen
keräysjärjes-
telmä.
A. Hävitysohjeet käyttäjille (yksityiset kotitaloudet)
1. Euroopan unionissa
Huomio: Jos haluat hävittää tämän laitteen, älä käytä tavallista
jätesäiliötä.
Käytetyt sähkö- ja elektroniikkalaitteet pitää hävittää erikseen
noudattaen lainsäädäntöä, joka takaa käytettyjen sähkö-
ja elektroniikkalaitteiden oikean käsittelyn, keräämisen ja
kierrättämisen.
Jäsenvaltioiden täytäntöönpanoa seuraten yksityiset kotitaloudet
EU:n jäsenvaltioissa voivat palauttaa käytetyt sähkö- ja
elektroniikkalaitteet määrättyihin keräyspaikkoihin ilmaiseksi*.
Joissakin maissa* paikalliset vähittäismyyjät voivat myös ottaa
vastaan vanhan tuotteen ilmaiseksi, jos asiakas ostaa vastaavan
uuden tuotteen.
*) Pyydä lisätietoja paikallisviranomaisilta.
Jos käytetyissä sähkö- tai elektroniikkalaitteissa käytetään paristoja
tai akkuja, hävitä nämä tuotteet etukäteen erikseen paikallisten
säädösten mukaisesti.
Hävittämällä tuotteen asiamukaisesti, autat varmistamaan, että
jätteet käsitellään, kerätään ja kierrätetään asianmukaisella tavalla.
Näin vältytään haitallisilta ympäristö- ja terveysvaikutuksilta,
joita saattaa olla seuraamuksena jätteen epäasianmukaisesta
käsittelystä.
2. Muissa maissa EU:n ulkopuolella
Jos haluat hävittää tuotteen, ota yhteys paikallisiin viranomaisiin ja
pyydä ohjeita tuotteen asianmukaiseen hävittämiseen.
B. Hävitysohjeet yrityskäyttäjille
2. Euroopan unionissa
Jos tuotetta on käytetty yrityskäytössä, ja haluat hävittää sen,
Oota yhteys SHARP-jälleenmyyjään, joka antaa sinulle lisäohjeita
tai ottaa tuotteen vastaan. Sinulta saatetaan veloittaa tuotteen
vastaanottamisesta ja kierrätyksestä johtuvat kustannukset.
Paikalliset keräyspisteet saattavat ottaa vastaan pienet tuotteet (ja
pienet määrät).
2. Muissa maissa EU:n ulkopuolella
Jos haluat hävittää tuotteen, ota yhteys paikallisiin viranomaisiin ja
pyydä ohjeita tuotteen asianmukaiseen hävittämiseen.
DK-KP85_COMMON.indd viiDK-KP85_COMMON.indd vii 2013-05-21 10:16:442013-05-21 10:16:44

viii
Information on Proper Disposal
Attention:
Your product
is marked
with this
symbol. It
means that
used electri-
cal and
electronic
products
should not
be mixed
with general
household
waste. There
is a separate
collection
system
for these
products.
A. Information on Disposal for Users (private households)
1. In the European Union
Attention: If you want to dispose of this equipment, please do not
use the ordinary dustbin!
Used electrical and electronic equipment must be treated separately
and in accordance with legislation that requires proper treatment,
recovery and recycling of used electrical and electronic equipment.
Following the implementation by member states, private households
within the EU states may return their used electrical and electronic
equipment to designated collection facilities free of charge*.
In some countries* your local retailer may also take back your old
product free of charge if you purchase a similar new one.
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has batteries or
accumulators, please dispose of these separately beforehand
according to local requirements.
By disposing of this product correctly you will help ensure that the
waste undergoes the necessary treatment, recovery and recycling
and thus prevent potential negative effects on the environment and
human health which could otherwise arise due to inappropriate
waste handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your local
authorities and ask for the correct method of disposal.
For Switzerland: Used electrical or electronic equipment can be
returned free of charge to the dealer, even if you don’t purchase a
new product. Further collection facilities are listed on the homepage
of www.swico.ch or www.sens.ch.
B. Information on Disposal for Business Users
1. In the European Union
If the product is used for business purposes and you want to
discard it:
Please contact your SHARP dealer who will inform you about the
take-back of the product.You might be charged for the costs arising
from take-back and recycling. Small products (and small amounts)
might be taken back by your local collection facilities.
For Spain: Please contact the established collection system or your
local authority for take-back of your used products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact your local
authorities and ask for the correct method of disposal.
Informationen zur Batterieentsorgung
Die für dieses Produkt mitgelieferte Batterie kann Spuren von Blei
enthalten.
Für die EU: Die durchgestrichene Abfalltonne bedeutet, dass
gebrauchte Batterien nicht mit dem Haushaltsmüll entsorgt werden
sollten! Es gibt getrennte Sammelsysteme für gebrauchte Batterien,
welche eine ordnungsgemäße Behandlung und Verwertung
entsprechend gesetzlicher Vorgaben erlauben. Weitere Einzelheiten
erhalten Sie von IhrerGemeindeverwaltung.
Für die Schweiz: Die gebrauchte Batterie kann an der Verkaufsstelle
zurückgegeben werden.
Für andere Nicht-EU Staaten: Bitte erkundigen Sie sich bei Bedarf
bei Ihrer Gemeindeverwaltung nach weiteren Informationen zur
Entsorgung von gebrauchten Batterien.
Information sur la mise au rebut de la pile
Les piles/accus fournies avec ce produit peuvent contenir des
traces de Plomb.
Au sein de l’Union Européenne : Le symbole de la poubelle sur
roues barrée laisse supposer que les piles/accus usagées ne
doivent pas être mélangées avec les déchets ménagers! Il existe
un mode de collecte séparé pour les piles/accus usagées, ce qui
permet d’effectuer un traitement et un recyclage en accord avec
la législation. Veuillez contacter une autorité locale pour plus de
renseignements sur le système mis en place.
Pour la Suisse : Les piles/accus usagées doivent être retournées
chez votre détaillant.
Pour les pays hors Union Européenne : Veuillez contacter une
autorité locale afin de connaître la bonne méthode à utiliser pour la
collecte de vos piles/accus usagées.
Información sobre la eliminación de la batería
Las baterías suministradas con este producto contienen pequeńas
cantidades de Plomo.
Para EU: El contenedor de basura con ruedas tachado indica que las
baterías usadas no deberían mezclarse con los residuos domésticos
generales. Existe un sistema de recogida independiente de baterías
usadas, para permitir un correcto tratamiento y reciclado de acuerdo
con la legislación vigente. Por favor póngase en contacto con el
sistema de recogida establecido o con las autoridades locales para
la recogida selectiva de las baterías usadas.
Para Suiza: Las baterías usadas deben ser retornadas al punto de
venta.
Para otros países fuera de la Unión Europea: Por favor póngase en
contacto con las autoridades locales para un correcto procedimiento
de eliminación de las baterías usadas.
Information om batteriavyttring
Batteriet som följer med denna produkt kan innehĺlla spĺr av Bly.
För EU: Batteriet är märkt med den överkorsade soptunnan vilket
betyder att det inte ska kastas i det vanliga hushĺllsavfallet. Det finns
ett separat insamlingssystem för batterier för att underlätta korrekt
behandling och ĺtervinning enligt gällande lagstiftning. Kontakta
kommunen för vidare information om insamling och ĺtervinning.
För Schweiz: Använda batterier lämnas till inköpsstället.
För länder utanför EU: Kontakta de lokala myndigheterna för
information om gällande sorterings- och ĺtervinningsföreskrifter om
du behöver göra dig av med ett använt batteri.
Informazioni sullo smaltimento della batteria
La batteria fornita con questo prodotto contiene tracce di Piombo.
Per EU: Il cassonetto barrato indica che le batterie usate non devono
essere gettate assieme ai rifiuti domestici!Vi è un sistema di raccolta
differenziata per le batterie usate, che consente il loro corretto
trattamento e riciclo secondo quanto previsto dalle leggi vigenti.
Vi prego di contattare le locali autorità per i dettagli del sistema di
raccolta e riciclaggio.
Per la Svizzera: Le batterie usate devono essere restituite al punto
vendita.
Per altri Stati non-EU: Vi prego di contattare le autorità locali per
conoscere il metodo corretto di conferimento delle batterie usate.
Informatie over afvalverwerking van batterijen
De batterij die bij dit toestel geleverd wordt bevat sporen van Lood.
Voor EU: De doorgestreepte vuilnisbak op wieltjes duidt aan dat
de gebruikte batterijen niet mogen terechtkomen in het gewone
huishoudelijke afval. Er bestaat een gescheiden ophaalsysteem
voor deze gebruikte batterijen om eigen behandeling en recyclage
volgens de wetgeving toe te laten. Gelieve de locale autoriteiten te
contacteren voor de details van ophaling en recyclage.
Voor Zwitserland: De gebruikte batterij moet bij hetverkooppunt
teruggebracht worden.
Voor andere niet EU landen: Gelieve contact op te nemen met uw
locale autoriteiten voor de correcte methode van verwerking van de
gebruikte batterijen.
Informaçăo sobre Eliminaçăo de Pilhas
A bateria fornecida com este produto contém traços de chumbo.
Para a Uniăo Europeia: O contentor de rodas traçado significa que
as baterias usadas năo deverăo ser colocadas junto com o lixo
doméstico! Existe um sistema de separaçăo próprio para baterias
usadas, para permitir um tratamento e reciclagem própria de acordo
com a legislaçăo em vigor. Por favor contacte as autoridades locais
para mais detalhes nos esquemas de recolha e reciclagem.
Para a Suíça: As baterias usadas deverăo ser devolvidas ao ponto
de venda.
Para os outros países fora da Uniăo Europeia: Por favor contacte
a sua autoridade local para o método correcto de disposiçăo das
baterias usadas.
Tietoja paristojen hävittämisestä
Tämän tuotteen mukana oleva paristo/akku saattaa sisältää jäänteitä
Lyijy.
EU-maat: Paristo/akku on merkitty yliviivatun roskasäiliön symbolilla,
mikä tarkoittaa, että sitä ei saa hävittää kotitalouden yleisjätteiden
kanssa. Paristoille/akuille on olemassa erillinen keräysjärjestelmä,
joka helpottaa niiden asiamukaista käsittelyä ja lainmukaista
kierrätystä. Ota yhteys kuntaviranomaisiin saadaksesi lisätietoa
keräyksestä ja kierrätyksestä.
Sveitsi: Käytetyt paristot/akut palautetaan ostopaikkaan.
EU:n ulkopuoliset maat: Ota yhteys paikallisviranomaisiin saadaksesi
lisätietoa voimassa olevista lajittelu- ja kierrätyssäädöksistä ja
ohjeet käytetyn pariston/akun hävittämiseen.
Information on Battery Disposal
The battery supplied with this product contains traces of Lead.
For EU: The crossed-out wheeled bin implies that used batteries
should not be put to the general household waste!There is a separate
collection system for used batteries, to allow proper treatment and
recycling in accordance with legislation. Please contact your local
authority for details on the collection and recycling schemes.
For Switzerland: The used battery is to be returned to the selling
point.
For other non-EU countries: Please contact your local authority for
correct method of disposal of the used battery.
DK-KP85_COMMON.indd viiiDK-KP85_COMMON.indd viii 2013-05-21 10:16:442013-05-21 10:16:44

E-1
ENGLISH
Introduction
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
Special Note
Supply of this product does not convey a license nor imply any right to distribute content created with this product in
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-generating
streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution
systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact
discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for
such use is required. For details, please visit http://mp3licensing.com
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
Accessories
The following accessories are included.
Remote control x 1
(RRMCGA327AW01)
“AA” size battery
(UM/SUM-3, R6, HP-7 or similar) x 1
FM aerial x 1 Pattern Paper
AM loop aerial x 1 Stand for iPad x 1
CONTENTS
Page
General Information
Precautions ...................................................................... 2
Controls and indicators ..............................................2 - 3
Preparation for Use
Wall mount preparation ................................................... 4
System connections ........................................................ 5
Remote control ................................................................ 6
Basic Operation
General control ........................................................... 6 - 7
Setting the clock (Remote control only) .......................... 7
Listening to Bluetooth enabled devices .....................8 - 9
iPod, iPhone and iPad
Listening to the iPod, iPhone or iPad ..................... 10 - 12
CD or MP3/WMA disc Playback
Listening to a CD or MP3/WMA disc ..................... 12 - 13
Advanced CD or MP3/WMA disc playback ............ 13 - 14
MP3/WMA folder mode (only for MP3/WMA files) .........15
Page
USB
Listening to USB mass storage device/MP3 player .......16
Advanced USB playback ................................................17
Radio
Listening to the radio .............................................. 17 - 18
Advanced Features
Using the Radio Data System (RDS) ...................... 18 - 20
Timer and sleep operation (Remote control only) ....21 - 22
Enhancing your system ................................................. 22
References
Troubleshooting chart .............................................22 - 24
Maintenance .................................................................. 24
Specifications ................................................................ 24
Introduction 1
Special Note 1
Accessories 1
Precautions 2
General
2
Controls and indicators 2
Front panel
2
Volume control
2
Remote control
3
Display
3
Wall mount preparation 4
Driving screws
4
Installing the unit
4
Falling prevention
4
System connections 5
Aerial connection
5
AC power connection
5
Bluetooth stand-by (Demonstration)
mode
5
Remote control 6
General control 6
Battery installation
6
Testof the remote control
6
Toturn the power on
6
Display brightness control
6
Volume auto fade-in
6
Volume control
6
Direct key power on function
6
Auto power on
6
Setting the clock (Remote control
only) 7
Auto power off function
7
Muting
7
X-Bass control
7
Bass control
7
Treble control
7
Function
7
Listening to Bluetooth enabled
devices 8
About Bluetooth technology
8
Pairing Bluetooth devices
8
Pairing with other Bluetooth source
devices
9
Listening to the sound
9
To nish listening
9
Listening to the iPod, iPhone or iPad
10
iPod, iPhone and iPad connection
(USB only)
10
iPod, iPhone or iPad playback via
USB terminal
10
iPhone playback
11
iPod and iPhone connection (Dock
only)
11
iPod or iPhone playback
11
Navigating the iPod, iPhone or iPad
menus
11
Listening to a CD or MP3/WMA disc
12
Todisconnect iPod, iPhone or iPad
12
Various iPod, iPhone and iPad
functions
12
Disc playback
12
Advanced CD or MP3/WMA disc
playback 13
Various disc functions
13
Direct track search
13
Repeat play
13
Random play
14
Programmed play (CD)
14
Programmed play (MP3/WMA)
14
MP3/WMA folder mode (only for
MP3/WMA les) 15
About folder playback order
15
Procedure to playback MP3/WMA
disc with folder mode on
15
Listening to USB mass storage
device/MP3 player 16
Toplay back USB/MP3 player with
folder mode off
16
Toplay back USB/MP3 player with
folder mode on
16
Toremove USB memory device
16
Advanced USB playback 17
Listening to the radio 17
Tuning
17
Using the Radio Data System (RDS)
18
Memorising a station
18
Torecall a memorised station
18
Toscan the preset stations
18
Toerase entire preset memory
18
Information provided by RDS
18
Using the Auto Station Programme
Memory (ASPM)
19
Notes for RDS operation
19
Torecall stations in memory
19
Timer and sleep operation (Remote
control only) 21
Timer playback
21
Enhancing your system 22
Troubleshooting chart 22
Sleep operation
22
Touse timer and sleep operation
together
22
Listening to the playback sounds of
portable audio player, etc.
22
Headphones
22
General
22
CD player
23
Remote control
23
Tuner
23
iPod, iPhone or iPad
23
USB
23
Condensation
23
If problem occurs
23
Factory reset, clearing all memory
23
Before transporting the unit
23
Maintenance 24
Specications 24
Care of compact discs
24
Cleaning the cabinet
24
General
24
Amplier
24
CD player
24
USB (MP3 / WMA)
24
Tuner
24

E-2
EN
■General
●Please ensure that the equipment is positioned in a
well ventilated area and ensure that there is at least
10 cm (4”) of free space along the sides and top of
the equipment.
10 cm (4”) 10 cm (4”)
●Use the unit on a firm, level surface free from vibration.
●Place the unit at least 30 cm (12”) away from any CRT
TV to avoid colour variations across the TV screen. If
the variations persist, move the unit further away from
the TV. LCD TV is not prone to such variation.
●Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home computers,
facsimiles, etc.) which generate electrical noise.
●Do not place anything on top of the unit.
●Do not expose the unit to moisture, to temperatures higher
than 40°C (104°F) or to extremely low temperatures.
●If your system does not work properly, disconnect
the AC power lead from the wall socket. Plug the AC
power lead back in, and then turn on your system.
●In case of an electrical storm, unplug the unit for safety.
●Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
●The AC power plug is used as a disconnect device
and shall always remain readily operable.
●Do not remove the outer cover, as this may result in
electric shock. Refer internal service to your local
SHARP service facility.
●The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
●No naked flame sources, such as lighted candles,
should be placed on the apparatus.
●Attention should be drawn to the environmental
aspects of battery disposal.
●This unit should only be used within the range of 5°C
- 35°C (41°F - 95°F).
●The apparatus is designed for use in moderate
climates.
Warning:
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage other than
that which is specified is dangerous and may result in a fire
or other type of accident causing damage. SHARP will not
be held responsible for any damage resulting from use of
this unit with a voltage other than that which is specified.
■Volume control
The sound level at a given volume setting depends on
speaker efficiency, location, and various other factors.
It is advisable to avoid exposure to high volume levels.
Do not turn the volume on to full at switch on. Listen to
music at moderate levels. Excessive sound pressure from
earphones and headphones can cause hearing loss.
Precautions
Controls and indicators
23
6
5
89
10
11
12 14
1516
7
1
13
4
ON/STAND-BY
ON/STAND-BY
■Front panel
Page
1. Disc Compartment ................................................ 13
2. Timer indicator ....................................................... 21
3. Remote sensor ......................................................... 6
4. Pairing indicator ...................................................... 8
5. Docking Station for iPod or iPhone.......................11
6. Headphone Terminal ........................................ 10, 22
7. USB Terminal .................................................... 10, 16
8. Volume buttons ........................................................ 6
9. Tuning Down, CD/USB, iPod/iPhone/
Bluetooth Skip Down ................................. 12, 13, 16
Page
10. Tuning Up, CD/USB, iPod/iPhone/
Bluetooth Skip Up ...................................... 12, 13, 16
11. Disc/USB/iPod/iPhone/Bluetooth Play
or Pause Button ................................................ 12, 13
12. Disc/USB Stop Button ..................................... 13, 16
13. Pairing Button .......................................................... 8
14. FUNCTION Button ................................................. 12
15. Disc Compartment Open/Close Button ........ 12, 13
16. On/Stand-by Button ...............................................11

E-3
Controls and indicators (continued)
■Remote control
Page
1. Remote Control Transmitter ....................................... 6
2. Open / Close Button .............................................12, 13
3. Numeric Buttons ....................................................... 12
4. X-Bass Button .............................................................. 7
5. Tuning Up / Down Button .......................................... 17
6. Bass / Treble Button .................................................... 7
7. Folder Button ........................................................15, 16
8. Tuner Preset Up Button,
iPod Cursor Up ................................... 11, 12, 15, 16, 18
9. Skip Down, Fast Reverse,
Time Down Button .......................... 7, 12, 13, 15, 16, 21
10. Clock/Timer Button ................................................ 7, 21
11. Tuner Preset Down Button,
iPod Cursor Down ....................................12, 15, 16, 18
12. Bluetooth Stand-by Button .................................... 5, 8
13. Dimmer Button ............................................................ 6
14. Display Button ......................................................15, 16
15. RDS ASPM Button ................................................18, 19
16. Bluetooth Play/Pause Button ..................................... 8
1 7. RDS Display Button .................................................. 18
18. Pairing Button .............................................................. 8
19. RDS PTY Button ...................................................18, 19
20. On/Stand-by Button ..................................... 6, 7, 11, 21
21. iPod Button .................................................................11
22. Tuner Button ......................................................... 17, 19
23. CD/USB Button .....................................................12, 16
24. Audio In Button .................................................... 21, 22
25. Mute Button ................................................................. 7
26. Volume Up/Down Button ............................................ 6
27. Play Mode Button ...........................................12, 13, 14
28. Enter Button ......................................... 7, 11, 12, 16, 21
29. Skip Up, Fast Forward,
Time Up Button ............................... 7, 12, 13, 15, 16, 21
30. Memory Button .....................................................14, 17
31. Sleep Button .............................................................. 22
32. Clear Button ................................................................14
33. iPod Play/Pause Button .......................................11, 12
34. iPod Menu Button .................................................11, 12
35. CD Play/Pause Button..........................................13, 14
36. CD Stop Button ....................................................13, 14
37. USB Play/Pause Button .......................................12, 16
38. USB Stop Button ....................................................... 16
■Display
Page
1. USB Indicator ............................................................. 16
2. iPod Indicator..............................................................10
3. CD Indicator ............................................................... 13
4. MP3 Indicator ............................................................ 12
5. WMA Indicator ........................................................... 12
6. RDM (Random) Indicator ...........................................14
7. MEM (Memory) Indicator ...........................................14
8. Repeat Indicator ........................................................ 13
9. Play/Pause Indicator ................................................. 13
10. Tuning FM Indicator .................................................. 17
11. FM Stereo Mode Indicator ........................................ 17
12. Stereo Station Indicator ............................................ 17
13. RDS Indicator ............................................................. 18
14. PTY Indicator ............................................................. 18
15. TP Indicator ................................................................ 18
16. TA Indicator ................................................................ 18
1 7. Muting Indicator .......................................................... 7
18. X-bass Indicator .......................................................... 7
19. Title Indicator ............................................................. 15
20. Artist Indicator ........................................................... 15
21. Folder Indicator ......................................................... 15
22. Album Indicator ......................................................... 15
23. File Indicator .............................................................. 15
24. Track Indicator ............................................................14
25. Daily Timer Indicator ................................................. 21
26. Once Timer Indicator ................................................. 21
27. Disc Indicator ............................................................. 13
28. Total Indicator ............................................................ 15
29. Sleep Indicator ........................................................... 22
2
1
3
5
6
4
8
11
13
15
7
10
12
14
17
19
9
38
37
35
33
31
30
29
27
26
24
23
22
21
20
36
34
32
28
25
16
18
BLUETOOTH
PAIRING
1 4 5 6 7 8910 11 1312 1415 16
292827252624232019 2221
17
18
2 3

E-4
EN
Wall mount preparation
To mount the unit on the wall
Caution:
●Be very careful to prevent the unit [2.45 kg (5.4 lbs.)]
from falling when mounting on the wall.
●Before mounting, check the wall strength. (Do not
put on the veneer plaster or whitewashed wall. The
unit may fall.) If unsure, consult a qualified service
technician.
●Mounting screws are not supplied. Use appropriate
ones.
●Check all wall mount screws for looseness.
●Select a good location. If not, accidents may occur or
the unit may get damaged.
●SHARP is not responsible for accidents resulting
from improper installation.
■Driving screws
SHARP designed the unit so you may hang it on the wall.
Use proper screws (not supplied). See below for size and
type.
3.2 mm (1/8”)
9 mm (3/8”)
Min. 22 mm (7/8”)
5 mm
(3/16”)
■Installing the unit
1 Fix the pattern paper to the wall in horizontal
position as below.
29 mm
44 mm
44 mm
509 mm
Wall surface
Pattern paper (supplied)
188 mm
2 Make a hole on the wall following the screw point
marks on the pattern paper by using a drill.
Wall surface
32 mm (1-1/4”)
8-9 mm (3/8”)
3 Fix a wall mount plug into the hole using a hammer,
until it is flush with the wall surface.
32 mm (1-1/4”)
8-9 mm (3/8”)
Wall surface
4 Fasten the screws to the wall as shown below.
(Total screw is 2 pieces).
Wall surface Wall surface
4.3 ~ 4.8 mm
Gap from the wall surface
5 Hang the unit onto the screws.
Wall surface
■Falling prevention
Safety wires (not supplied) are useful to prevent the unit
from falling off the wall.
Wall
Screw eye (not supplied)
Safety wires (not supplied)
Loop the safety wires (not supplied) into each hole as
shown and tie the safety wires to a hook (screw eye).
Ø wire > 1.5 mm
The diameter of wire/cable must be less than 1.5 mm.

E-5
Make sure to unplug the AC power lead before making any connections.
System connections
■Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket
and position the FM aerial wire in the direction where the
strongest signal can be received.
External FM aerial:
Use an external FM aerial (75 ohms coaxial cable) for
better reception. When an external FM aerial is used,
disconnect the supplied FM aerial wire.
Installing the AM loop aerial:
<Assembling> <Attaching to the wall>
Wall Screws (not supplied)
Note:
Placing the aerial on the unit or near the AC power lead
may cause noise pickup. Place the aerial away from the
unit for better reception.
■AC power connection
After checking all the connections have been made correctly,
plug the AC power lead of this unit into the wall socket.
Note:
Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
■Bluetooth stand-by (Demonstration) mode
●The first time the unit is plugged in, the unit will enter
the Bluetooth stand-by (demonstration) mode. “BT
Standby” will be displayed.
●To cancel the Bluetooth stand-by (demonstration)
mode, press the BT STAND-BY button (remote control)
during power stand-by mode. The unit will enter the
low power consumption mode.
●To return to the Bluetooth stand-by (demonstration)
mode, press the BT STAND-BY button again.
●If iPod or iPhone is docked, the unit will begin charging.
“Charge Mode” will be displayed. Demonstration
mode is invalid during charge mode.
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
External FM aerial for better
reception (not supplied)
FM aerial
AM loop
aerial
Installing the supplied
FM aerial

E-6
EN
Remote control
■Battery installation
1 Open the battery cover.
2 Insert the supplied battery according to the terminal
indicated in the battery compartment.
When inserting or removing the battery, push it towards
the (–) battery terminals.
3 Close the cover.
Caution:
●Remove the battery if the unit will not be used for a
long period of time. This will prevent potential damage
due to battery leakage.
●Do not use rechargeable battery (nickel-cadmium
battery, etc.).
●Installing the battery incorrectly may cause the unit to
malfunction.
●Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, fire
or the like.
Notes concerning use:
●Replace the battery if the operating distance is reduced
or if the operation becomes erratic. Purchase an “AA”
size battery (UM/SUM-3, R6, HP-7 or similar).
●Periodically clean the transmitter on the remote control
and the sensor on the unit with a soft cloth.
●Exposing the sensor on the unit to strong light may
interfere with operation. Change the lighting or the
direction of the unit if this occurs.
●Keep the remote control away from moisture, heat,
shock, and vibrations.
■Test of the remote control
Check the remote control after checking all the connections.
Point the remote control directly at the remote sensor on
the unit. The remote control can be used within the range
shown below:
BLUETOOTH
PAIRING
Remote sensor
0.2 m - 6 m
(8” - 20’ )
General control
BLUETOOTH
PAIRING
■To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-
by mode.
■Display brightness control
To dim the display brightness, press the DIMMER button
on the remote control.
Dimmer 1
Dimmer 2
Dimmer Off
(Display is dim).
(Display is bright).
(Display gets dimmer).
■Volume auto fade-in
If you turn off and on the main unit with the volume set to
28 or higher, the volume starts at 16 and fades in to the
last set level.
■Volume control
Press VOLUME (+ or -) on the main unit or VOL +/- on the
remote control to increase or decrease the volume.
■Direct key power on function
When you press any of the following buttons, the unit
turns on.
●iPod, CD/USB, AUDIO IN, TUNER, BLUETOOTH / ,
iPod /, CD /, USB / on the remote control: Selected
function is activated.
●/ button on the main unit: The unit turns on and
playback of the last function will start (CD, TUNER,
USB, iPod, AUDIO IN, Bluetooth)
■Auto power on
During BT Standby mode, when music is played from your
device, the unit will automatically power on when:
●The Bluetooth connection has been set up between the
main unit and your device and they remain connected.

E-7
General control (continued)
■Auto power off function
The main unit will enter the stand-by mode (when iPad,
iPod or iPhone is not connected) after 15 minutes of
inactivity during:
iPod: Not docked.
Audio In: No detection of input signal.
CD: In the stop mode or no disc.
USB: In the stop mode or no media.
Bluetooth In the pause mode on not connected condition.
Note:
However, if iPod or iPhone is docked, the unit will begin
charging.
“Charge Mode” will be displayed.
■Muting
The volume is muted temporarily when pressing the MUTE
button on the remote control. Press again to restore the
volume.
■X-Bass control
When the power is first turned on, the unit will enter the
extra bass mode which emphasises the bass frequencies,
and “X-BASS” indicator will appear. To cancel the extra
bass mode, press the X-BASS button on the remote
control.
■Bass control
1 Press the BASS/TREBLE button to select “Bass”.
2 Within 5 seconds, press the VOLUME (+ or –) button to
adjust the bass. “X-BASS” indicator will disappear.
- 5
↔
- 4
........↔ +
4
↔ +
5
■Treble control
1 Press the BASS/TREBLE button to select “Treble”.
2 Within 5 seconds, press the VOLUME (+ or –) button to
adjust the treble. “X-BASS” indicator will disappear.
- 5
↔
- 4
........↔ +
4
↔ +
5
■Function
When the FUNCTION button on main unit is pressed, the
current function will change to different mode. Press the
FUNCTION button repeatedly to select desired function.
CD FM MONOFM STEREO
AM
Audio In iPod USB
Bluetooth
Note:
The backup function will protect the memorised function
mode for a few hours should there be a power failure or
the AC power lead becomes disconnected.
Setting the clock (Remote control only)
BLUETOOTH
PAIRING
In this example, the clock is set for the 24-hour (0:00)
display.
1 Press the ON/STAND-BY button to turn the power
on.
2 Press the CLOCK/TIMER button.
3 Within 10 seconds, press the ENTER button. To adjust
the day, press the or button and then press the
ENTER button.
4 Press the or button to select 24-hour or 12-hour
display and then press the ENTER button.
The 24-hour display will appear.
(0:00 - 23:59)
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
5 To adjust the hour, press the or button and then
press the ENTER button. Press the or button
once to advance the time by 1 hour. Hold it down to
advance continuously.
6 To adjust the minutes, press the or button and
then press the ENTER button. Press the or
button once to advance the time by 1 minute. Hold it
down to advance continuously.
To confirm the time display:
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.
Note:
When power supply is restored after unit is plugged in
again or after a power failure, time display will be blinking.
Reset the clock.
To readjust the clock:
Perform “Setting the clock” from step 1.

E-8
EN
■About Bluetooth technology
Bluetoothwirelesstechnologyisa short-range radiotechnol-
ogy that enables wireless communication between various
typesofdigital devices, suchasmobilephoneor computer.It
operates within a range of about 10 meters (30 feet) without
the hassle of having to use cables to connect these devices.
SincetheBluetooth technology does not require line ofsight
between the communicating devices, it is not necessary to
lineupthetransmittingdeviceandthereceiver,asinthecase
of infra red technology.
Communication System and Bluetooth Profile of this
unit
There are many available Bluetooth Profiles describing the
basic communication methods, specific functions and uses,
to enable communication between devices.
This unit supports the following:
Communication System: Bluetooth Specification version
2.1 Bluetooth + Enhanced Data Rate (EDR) Profile : A2DP
(Advanced Audio Distribution Profile)
A2DP enables audio streaming from an A2DP equipped
Bluetooth stereo audio source device (eg mobile phone)
to this unit. By converting wireless stereo audio signal to
analogue audio signal, you can enjoy listening to the sound
through this speaker system.
AVRCP (Audio/VideoRemoteControlProfile)isatechnology
thatallowsasingleremotecontrol tocontrolallBluetooth en-
abled Audio Video equipment to which a user has access.
Notes when using unit with a mobile phone
●This unit cannot be used to talk over the telephone even
when there is a Bluetooth connection made to a mobile
phone.
●Please refer to the operating manual supplied with the
mobile phone for details on operation of your mobile
phone while transmitting the sound using a Bluetooth
connection.
Audio stream
Bluetooth mobile phone or other
Bluetooth Stereo audio source device
■Pairing Bluetooth devices
Bluetooth devices need to be initially paired first before they
can exchange data. Once paired, it is not necessary to pair
them again unless:
●pairing is made with more than 8 devices.
Pairing can only be made one device at a time. This
unit can be paired to a maximum of 8 devices. If subse-
quent device is paired, the oldest device paired, will be
deleted and replaced with the new one.
●this unit is reset. All pairing information is deleted when
unit is reset.
●pairing information is deleted while re-pairing, etc.
On indicators
Status PAIRING indicator (blue)
Unconnected Blinks
Pairing mode Blinks quickly
Connected Lights up
Listening to Bluetooth enabled devices

E-9
■Pairing with other Bluetooth source devices
1 Press the ON/STAND-BY button to turn the power
on.
2 Press the BLUETOOTH / button (remote control)
to select Bluetooth function. (PAIRING indicator
blinks.)
3 Press and hold the PAIRING button for 3 seconds
or more.
PAIRING indicator blinks quickly. The unit is now in
pairing mode and is ready to be paired with other
Bluetooth source device.
4 Perform pairing procedure on the source device to
detect this unit. “SHARP DK-KP85” will appear in
the detected devices list (if available) in the source
device. (Refer the source device operating manual
for details).
Notes:
●Place the devices to be paired within 1 meter (3
feet) of each other when pairing.
●Some source devices are unable to display lists of
detected devices. To pair this unit with the source
device, refer to the source device operating man-
ual for details.
5 Select “SHARP DK-KP85” from the source list. If
Passcode* is required, enter “0000”.
* Passcode may be called PIN Code, Passkey, PIN
number or Password.
6 Pairing indicator (blue) will stop blinking once the
unit is successfully paired with the source device.
(Pairing information is now memorised in the unit.)
Some audio source devices may connect with the
unit automatically after pairing is completed, oth-
erwise follow the instructions in the source device
operating manual to start connection.
7 Press the play button on main unit, remote control or
source device to start Bluetooth connection.
Notes:
●If this unit or the source device is turned off before Blue-
tooth connection is completed, pairing will not be com-
pleted and the pairing information will not be memo-
rised. Repeat step 1 onwards to start pairing again.
●To pair with other devices, repeat steps 1 - 5 for each
device.
●Once a device is ousted or deleted from the pairing list,
the pairing information for the device is also deleted. To
listen to the sound from the device again, it needs to be
re-paired. Perform steps 1 - 5 to pair the device again.
●When Bluetooth device is turned off, “Disconnected” is
displayed briey. Pairing LED turns off for a while and
then will start blinking again.
■Listening to the sound
Check that:
●The source device Bluetooth functionality is ON.
●Pairing of this unit and the source device is completed.
●Unit is in connected mode (pairing indicator (BLUE) lights
up.)
1 Press the ON/STAND-BY button to turn the power
on.
2 Press the FUNCTION button to select Bluetooth func-
tion.
3 Start the Bluetooth connection from the Bluetooth
stereo audio source device.
4 Press play button (on main unit, remote control or
source device).
Notes:
If the source device has an extra bass function or
equalizer function, set them to off. If these functions
are on, sound may be distorted.
Notes:
●You need to make the Bluetooth connection again if:
- the source device is not turned on, or its Bluetooth func-
tionality is off or is in sleep mode.
●During Bluetooth function, if the Bluetooth connected de-
vice and the one connected to the AUDIO IN are played
simultaneously, only the Bluetooth sound can be heard.
■To finish listening
Perform any of the followings.
- Disconnect the Bluetooth connection on the audio source
device.
Refer the operating manual supplied with the device.
- Turn off the Bluetooth stereo audio source device.
- Turn off this unit.
Note:
The volume of this unit may not be controlled as intended
depending on the device.
Bluetooth operation buttons (remote control only)
Press the button to play or pause.
Press the button to skip up.
Press and hold to fast forward.
Press the button to skip down.
Press and hold to fast reverse.
Listening to Bluetooth enabled devices (continued)

E-10
EN
Listening to the iPod, iPhone or iPad
Made for:
●iPhone 5
●iPhone 4S
●iPhone 4
●iPhone 3GS
●iPhone 3G
●iPhone
●iPad (4th generation)
●iPad mini
●iPad (3rd generation)
●iPad 2
●iPad
●iPod touch (5th generation)
●iPod touch (4th generation)
●iPod touch (3rd generation)
●iPod touch (2nd generation)
●iPod touch (1st generation)
●iPod classic
●iPod nano (7th generation)
●iPod nano (6th generation)
●iPod nano (5th generation)
●iPod nano (4th generation)
●iPod nano (3rd generation)
●iPod nano (2nd generation)
Caution:
Please update your iPod, iPhone and iPad unit to the
latest software version before using it. Please visit Apple’s
homepage to download the latest version for your iPod,
iPhone and iPad.
Notes:
●Charging terminal for iPod, iPhone and iPad:
CONDITION DOCK USB TERMINAL
USB function NO YES
Other function
(iPod / CD /
Tuner / Audio In)
YES NO
Stand-by YES NO
BT Standby YES NO
●The message “This accessory is not made to work
with iPhone” or similar, may appear on the iPhone
screen when:
- battery is low.
- the iPhone is not properly docked (eg. slanting).
●If this occurs, remove and re-dock the iPhone.
●You may also experience brief audio interference
during incoming calls.
■iPod, iPhone and iPad connection (USB
only)
1 Insert the connector to the iPod, iPhone or iPad.
Connector
iPad
2 Place the iPad to the stand for iPad.
iPad
Stand for iPad
3 Connect the iPod, iPhone or iPad to the unit via USB
connector.
USB
■iPod, iPhone or iPad playback via USB
terminal
1 Press the ON/STAND-BY button to turn the power
on.
2 Press the CD/USB button on the remote control or
FUNCTION button repeatedly on the main unit to
select USB function.
3 Connect iPod, iPhone or iPad to the unit. “USB/iPod”
will appear.
File name
4 Press the / (USB / ) button to start playback.
Note:
Stop button ( ) is invalid during iPod, iPhone or iPad
playback

E-11
Listening to the iPod, iPhone or iPad (continued)
■iPhone playback
●Sound will only switch from iPhone to the main
unit after authentication process is completed in
approximately 10 seconds.
●Incoming calls will pause the playback.
●Once the calls are answered, the conversation can
only be heard through the built-in iPhone speaker. Turn
on the iPhone speaker or undock the iPhone to start
conversation.
■iPod and iPhone connection (Dock only)
Caution:
Unplug all accessories from the iPod or iPhone before
inserting it into the dock.
Note:
Docking station is for iPod touch (5th generation), iPod
nano (7th generation) and iPhone 5 connection only. Other
Apple products (iPod, iPhone and iPad) can be connected
via USB terminal.
1 Open the docking station for iPod and iPhone by
pulling up the cover.
2 Dock your iPod or iPhone into the unit.
images on page 9
iPhone (bottom)
Lightning connector
Dock for iPhone
iPhone
■iPod or iPhone playback
1 Press the ON/STAND-BY button to turn the power
on.
2 Press the iPod button on the remote control or
FUNCTION button repeatedly on the main unit to
select iPod function.
3 Insert iPod or iPhone unit into the dock of main unit.
“Dock Ok” will appear.
4 Press the / (iPod / ) button to start playback.
BLUETOOTH
PAIRING
■Navigating the iPod, iPhone or iPad
menus
1 Press the MENU button to view the menu on iPod,
iPhone or iPad unit. Press it again to go back to
previous menu.
2 Use the PRESET ( or ) button to select an item on
the menu and then press ENTER button.
Note:
When navigating the iPod, iPhone or iPad menu with
remote control, do not operate any of the buttons on
the iPod or iPhone unit. The volume level is adjusted by
pressing the VOLUME (+ or -) on the main unit or VOL +/-
on the remote control. Adjusting the volume on the iPod,
iPhone or iPad units give no effect.
iPod, iPhone and iPad operations:
The operations described below depend on the generation
of iPod, iPhone and iPad you are using.
System on operation:
When the main unit is powered on, the iPod, iPhone or
iPad units will automatically power on when docked or
connected in the unit.
System off (stand-by operation):
When the main unit is turned to stand-by mode, the docked
iPod, iPhone or connected iPad unit will automatically turn
to stand-by mode.