Sharp XL-MP150E User manual

MODEL
XL-MP150E
MICRO COMPONENT SYSTEM
1 Accessories
Remote control × 1AM loop aerial × 1
1Open the battery cover.
2Insert the batteries as shown.
3Close the cover.
Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
3 System connections
4 Turn on your system
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
1Press the X-BASS (SURROUND)/
DEMO button to cancel the demon-
stration mode.
2Press the ON/STAND-BY button to
turn the power on.
TINSEA086AWZZ
05D R AS 1
2 Remote control battery installation
This Quick Start Guide will help you to correctly install and op-
erate your system.
FM aerial × 1
RATED SPEAKER IMPEDANCE:
6 OHMS MIN.
AC INPUT
ANTENNA
RIGHT
RIGHT LEFT
FM
75 OHMS
AM
LOOP
VIDEO/AUX
IN
SUBWOOFER
PRE-OUT
SPEAKERS
LEFT
Left speaker
Right speaker
AM loop aerial
FM aerial
Wall socket
(AC 230 - 240 V, 50 Hz)
Black
Red
AUTO REVERSE
USB cable × 1
QG 150EE 9/3/05, 10:44 AM2

Listening to a CD or MP3/WMA disc Listening to the radio
1Press the CD button.
2Press the 1 button and within 5 seconds, press the 00
00
0OPEN/
CLOSE button to open the disc tray 1.
3Place the CD on the disc tray 1, label side up.
4Press the 00
00
0OPEN/CLOSE button to close the disc tray 1.
5You can place discs on trays 2 - 5 by following steps 3 - 5.
6Press the / button to start playback.
1Press the TUNER (BAND) button repeatedly to select the desired
frequency band (FM or AM).
2Press the TUNING ( or ) button to tune in to the desired
station.
When the TUNING button is pressed for more than 0.5 seconds,
scanning will start automatically and the tuner will stop at the first
receivable broadcast station.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
"" will appear when an FM broadcast is in stereo.
Listening to a cassette tape
1Press the TAPE button.
2Open the cassette door by pushing the area marked "00
00
0PUSH
EJECT".
3Load a cassette into the cassette compart-
ment with side A facing you.
4Press the button to choose one side
or both sides.
5Press the / (TAPE ) button to listen to side A, or the
(TAPE ) button for side B.
If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power on again.
2. If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
If neither operation above restores the unit, clear all the memory by
resetting it.
Clearing all the memory (reset)
1. Press the ON/STAND-BY button to enter the power stand-by
mode.
2. Whilst pressing down the button and the X-BASS
(SURROUND)/DEMO button, press the TUNING button until
"CLEAR ALL" appears.
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
Maintenance
Routine maintenance is required for continued optimum perfor-
mance, refer to the operation manual.
12 cm (5") 8 cm (3")
AUTO REVERSE
XL-MP150
AUTO REVERSE
USB
XL-MP150
AUTO REVERSE
USB
Listening to audio data playing on a PC
1Connect the unit to the PC with a USB cable.
2Turn on a PC to boot the OS.
3Press the ON/STAND-BY button on the main unit to turn the power on.
4Press the VIDEO/AUX/USB button repeatedly to select “USB”.
5Play back on the PC.
6Adjust the volume on the unit.
Refer to the operation manual. (pages 32-36.)
QG 150EE 9/3/05, 10:44 AM3