Sharp LC-40UI7352K Technical manual

Quick Start Set Up Guide
For information on using the TV’s features, please refer to the Operating Instructions.
Quick & easy guide for setting up your TV
What is included in the box
Using the remote control
Setting up the TV for the rst time - including attaching the stand
Connecting other devices to the Television
Need help setting up or using your TV?
Please contact the UK & ROI Helpline*
Telephone UK 0330 024 0803 or ROI 01443 3323
Online support at: www.umc-uk.co.uk
Email support at: [email protected]
*Calls to 0330 numbers are charged at standard call rates and are included as part of any bundled minutes with your
phone provider.
Calls to the ROI number are charged at the local call rate.
The telephone opening hours are Monday to Friday 8.30am to 6pm, Saturday 9am – 5pm.
Bank Holidays - 10am to 4pm
Closed Christmas and New Years day
Model Numbers
LC-40UI7252K LC-49UI7252K
LC-40UI7352K LC-49UI7352K
LC-40UI7452K LC-49UI7552K
LC-40UI7552K
LC-43UI7252K
LC-43UI7352K
LC-43UI7552K
Trademark Sharp
Model ID LC-40UI7252K
LC-40UI7352K
LC-40UI7452K
LC-40UI7552K
LC-43UI7252K
LC-43UI7352K
LC-43UI7552K
LC-49UI7252K
LC-49UI7352K
LC-49UI7552K
Energy eciency class A A A
Visible screen size (diagonal) 102 cm / 40 inches 109 cm / 43 inches 123 cm / 49 inches
On-mode power consumption 62.0 W 69.0 W 89.0 W
Annual energy consumption *1 91 kWh 101 kWh 130 kWh
Standby power consumption *2 <0.50 W <0.50 W <0.50 W
O mode power consumption n/a n/a n/a
Screen resolution 3840 (H) x 2160 (V) 3840 (H) x 2160 (V) 3840 (H) x 2160 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4
hours per day for 365 days. The actual energy consumption will depend on how the television is used.
*2: When the TV is turned o with the remote control/standby button and no function is active.
Product che
Additional Technical Information
RF 75 ohm Antenna / Analog / DVB / Satellite
Inputs 3 x HDMI2.0, 1 x USB3.0, 2 x USB2.0, 1 x SD card reader,
1 x RJ45 LAN/Ethernet, 1 x Mini -SCART, 1 x Mini Component/YPbPr,
1 x Mini AV IN - Composite Video/CVBS and L/R Audio shared for Composite Video and
Component/YPbPr.
Sound Outputs 1 x Digital Optical Audio output, 1 x 3.5mm Headphone
Speaker*/ Amplier Watts
(RMS) 2 x 10 / 2 x 8
Voltage and power
consumption
AC 220V ~ 240V; 50Hz
62/90/110W (home mode/
standard/max)
(<0.5W in Standby)
AC 220V ~ 240V; 50Hz
69/95/115W (home mode/
standard/max)
(<0.5W in Standby)
AC 220V ~ 240V; 50Hz
89/115/140W (home mode/
standard/max)
(<0.5W in Standby)
Dimensions including stand
(mm) 921W x 572H x 184D 969W x 599H x184D 1103W x 684H x 230D
Net weight (Kgs) 8.0 8.7 11.2
Wall Mounting VESA 200 x 300 (mm) VESA 200 x 300 (mm) VESA 600 x 300 (mm)
*Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).
LC-40UI7252K
LC-40UI7352K
LC-40UI7452K
LC-40UI7552K
Harman / Kardon
Harman Kardon is trademark of HARMAN International Industries, Incorporated, registered in the United
States and/or other countries.
LC-43UI7252K
LC-43UI7352K
LC-43UI7552K
LC-49UI7252K
LC-49UI7352K
LC-49UI7552K
Win a
Soundbar
Register your manufacturers guarantee online within
14 days of purchase at www.registertoday.co.uk/sharp
and enter into a prize draw to
SHA/QSW/0034
Technical Specication
Please save your box/packaging as you will need this in the event of warranty/service repair or support.
We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to
package your item in the event of warranty/service repair is in it’s original box/packaging.
REMOTE CONTROL
789
0
123
456
TV
GUIDE
VOL CH
SOURCE
SOUND
PICTURE
ON/OFF MUTE
TEXT
SUBTITLE
INFO
TV
BACK
FAV
NET+
GOTO
DVD SETUP
DVD MENU
A-B
3D
REPEAT
REC LI ST
PVR/MEDIA
EXIT
MENU
OK
1
4
2
3
ON/OFF - Switch on the TV when in standby or vice versa.
MUTE - Mute the sound or vice versa.
NUMBER BUTTONS - 0–9 to select a TV channel directly.
TV GUIDE - Opens the 7 day TV guide (digital TV mode).
- To return to the previous channel viewed.
VOL (+/-) - To increase/decrease the sound level.
PICTURE - Scrolls through picture mode options.
SOUND- Scrolls through sound mode options.
SOURCE - To display the input/source menu.
CH (+/-) - To increase or decrease the channel being watched.
MENU - To display OSD menu.
EXIT - To exit all menus.
- Allows you to navigate the on-screen menus and adjust
the system settings to your preference.
BACK - To go back a previous step.
FAV - To display favourites menu.
INFO - Press once for now/next channel information.
- Press twice for information about the current programme.
TEXT - To enter/exit Text.
SUBTITLE - To switch the dialogue at the bottom of the screen (on/off).
TV - To switch to Digital Channels.
YOUTUBE - Access the Youtube App.
NETFLIX - Access the Netflix App.
NET+ - Access the Aquos NET+ Smart Portal.
RECORD/DVD MENU - Access the USB record function/Access the
DVD menu of the DVD inserted (must be set to the DVD source).
REC LIST/DVD SETUP - Opens the list of previously recorded items/Access
the TV’s DVD setup menu (must be set to the DVD source).
GOTO - To go to a specific chapter.
A-B - Press once to set point, press a second time to return to point.
ANGLE/3D - Select different angle of DVD.
REPEAT - To repeat playback.
Key
3
2
1
For models with integrated DVD players.
For models with PVR Function.
For models with USB Playback.
For models with 3D functions.
4
- To restart thecurrent chapter
- To advance forward to thenextchapter
-To stoptheplayback/Eject Disc
(To EJECTthediscpress/holdthebuttonfor4 seconds)
- Toplay infastrewindmode
- To play infastforwardmode
- To play/pause
Sky Remote Code
If you wish to use your Sky remote to operate the TV’s basic
functions, you will need a Sky remote control (Revision 9 or later) and
you will need to program it with the code 2134. If you wish to use
your Sky Q remote to operate the TV’s basic functions, you will need
to program it with the code 4170.
To receive Freeview channels, in particular Freeview HD channels, you will need a Digital TV
aerial and be in a good Freeview coverage area. You can check coverage for your postcode at
www.freeview.co.uk.
Please note that any Freeview HD channels found during tuning will be placed in channel
positions above 100. For example, 101 (BBC1 HD) 102 (BBC2 HD) etc.
Re-packing the Television
If you need help setting up your TV or you require any technical support, in the rst instance please
contact the helpline.
In the unlikely event you need to return the product to the store/retailer from where it was purchased or
you need warranty/service support, please ensure you package the item adequately in order that it does
not get damaged.
The best way to package it is in the original box.
Please take the following steps:
1) Remove the stand/feet from the TV.
2) Put all of the accessories that came with the TV in the box ensuring they are placed at the back of the
TV. (not near the screen/panel side) Note: In the event of warranty/service support, you do not need to
send the accessories/stand/feet.
3) Ensure the power cable / plug is located at the back of the TV (not on the screen/panel side)
4) Never put anything in the box on the screen/panel side of the TV as it’s likely to damage it.
1. 2.
1. Plug
2. Accessories pack
TV Panel/Screen
Both the plug and accessories pack must be
placed at the rear of the TV.
Rear of TV
Sharp QSG - Sharp - M - SMART UHD models - SHA-QSW-0034 v1 nonprint.indd 1Sharp QSG - Sharp - M - SMART UHD models - SHA-QSW-0034 v1 nonprint.indd 1 16/08/2018 12:49:4516/08/2018 12:49:45

1. Languages
Select your preferred on screen display language. This will change the language in
which the menus and associated information is displayed in. When set up has been
completed, this can be changed by selecting Menu > Settings > Language
3. Network setup You can connect the TV to your broadband router or wire-
less network in order to take advantage of the Smart functions. If you connect the
TV to your router using an Ethernet cable (recommended) this step will be skipped.
Follow the on screen prompts to connect to your wireless network. You can set up
the Network connection later in the network menu.
5. TV Installation – Audio.
Depending on how you use / install your TV, select the appropriate setting. The sound
settings on the TV will adjust to suit the type of installation.
6. Default Source
Select the source which you use the most. If Digital TV (Freeview) is chosen, then at
the next step, the set will tune in and default to Digital TV (Freeview). If one of the
other sources is selected, then the set will not tune in at this stage and default to
that input. If it is required to tune the set in later, this can be achieved by selecting
Menu > Channels
4First time installation
4. Environment of Use
Home Mode: For normal use, by default it is set to a power saving mode which re-
duces the energy used by up to 25% (by reducing the power to the LED/LCD panel).
This can be changed in the picture mode settings.
NOTE: In Home Mode, the TV will switch itself to the standby mode after 4 hours in
the event that the buttons on the remote control or TV set are not used.
Store Mode: For store display use. The picture is adjusted to optimum settings. The
store demonstration will appear on the screen automatically after two minutes.
1 2 3
4 5 6
2. Country Selection
Select the correct flag for the country in which the set will be used in. This will enable
the set to correctly install the functions applicable in the country of use.
Setting up the TV set for the rst time
Connectivity
* The Ethernet/LAN port is used for Freeview HD services and smart functions.
Ethernet/LAN* Network connection
Digital Audio Digital Optical Audio Output
USB 2.0 2 x USB port 2.0
HDMI 1 HDMI input
HDMI 2 HDMI input (ARC)
YPbPr HD input (YPbPr)
AV IN Audio/Video input
Mini SCART Mini SCART input
SAT IN Satellite input
RF in RF / TV aerial input
HDMI 3** HDMI input
USB 3.0 USB port 3.0
CI card in Common interface module
SD SD card input
Earphones Earphone input
AI
M
L
BJ
N
C
D
E
F
G
K
O
H
ARC
 EARPHONE
ABCDEFGHIJ
L
K
M
N
O
Fitting the stand
For the stand installation, there is
one type of screw provided as shown
below.
To complete the stand installation you
will require a cross head screw driver.
Place the TV set on a flat and
clean surface with the panel facing
downwards to avoid damage.
1
12
4 x
3
4
1
2
3
Used for attaching the stand
to the TV set (g.2)
4 x
TV panel must be facing downwards.
Place the TV set on a flat and clean surface
with the panel facing downwards to avoid
damage.
When the stand feet are installed correctly the
stand feet will be longest at the front of the TV
and shortest at the back with the feet pointing
away from each other.
When the stand/feet are in the correct
position, secure the feet to the underside of
the TV set using 4 screws provided.
L
R
What is included
in the box
1 x Operating Instructions
1 x Quick start guide
1 x TV
1 x Mini composite / AV cable
1 x Mini component / YPbPr cable
1 x Remote Control
1 x Stand installation pack
2 x AAA Batteries
1 x Power cable
1 x Mini SCART cable
Connecting your set
1) Connect the TV to your power socket.
2) If you wish to use the TV to receive Freeview/Saorview channels,
connect the RF input from the TV to your outdoor Digital TV aerial.
If you do not wish to receive Freeview/Saorview, skip this step.
2
Outdoor Digital
TV Aerial
1.
2.
3Powering On the TV
Switch on the television by pressing
the TV control stick located on the
TV set.
TV control stick
Insert the batteries supplied into the remote
control and press the standby button to power
on the TV.
TV Control Stick Remote Control: Installing Batteries
Register your manufacturers
guarantee online within
14 days of purchase at
www.registertoday.co.uk/sharp
and enter into a prize draw to
win a Sharp Soundbar
gu
arantee
online
within
1
4 days of purchase at
www.registertoday.co.uk/shar
p
a
n
d
enter into a prize
d
raw t
o
win a S
h
arp Soun
db
ar
Terms and conditions apply. Online registration only.
Back/Shortest
Front/Longest
Sharp QSG - Sharp - M - SMART UHD models - SHA-QSW-0034 v1 nonprint.indd 2Sharp QSG - Sharp - M - SMART UHD models - SHA-QSW-0034 v1 nonprint.indd 2 16/08/2018 12:49:5016/08/2018 12:49:50