Sharper Image WIRELESS CHARGE BED CADDY User manual

WIRELESS CHARGE
BED CADDY
FCC STATEMENT
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement Caution: To maintain
compliance with the FCC’s RF exposure guidelines, place the product
at least 20cm from nearby persons.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
SHARPER IMAGE®NAME AND LOGOS (INCLUDING
THE 77 LOGO AND TOMORROW’S TOMORROW)
ARE TRADEMARKS OR REGISTERED TRADEMARKS.
DISTRIBUTED BY AND © 2021 MERCHSOURCE, LLC.
IRVINE, CA 92618. ALL RIGHTS RESERVED.
PRINTED IN CHINA.
DUE TO CONTINUOUS PRODUCT
IMPROVEMENTS, THE PICTURES ON THIS
MANUAL MAY DIFFER SLIGHTLY FROM THE
ACTUAL PRODUCT.
KEEP THIS INSTRUCTION MANUAL AS IT
CONTAINS IMPORTANT INFORMATION FOR
FUTURE REFERENCE.
This product is meant for use only in conjunction with a suitable device.
Please consult your device packaging to determine whether this product
is compatible with your particular device. Manufacturer is not
responsible for any damages to any device or personal property
incurred through the use of this product.
Manufacturer shall in no way be liable to you or to any third party for
any damages you or any third party may suffer as a result of use,
intended or unintended, or misuse of this product in conjunction with any
device or accessory other than the compatible device for which this
product is designed or intended. Manufacturer will not be responsible for
any damages you or any third party may suffer as a result of misuse of
this product as outlined above.
Samsung and Galaxy S are both registered trademarks of Samsung
Electronics Co., Ltd. Apple and iPhone are trademarks of Apple Inc. Qi is
a trademark of the Wireless Power Consortium.
SAFETY WARNINGS:
PLEASE READ BEFORE USE
• Not a children’s item. Keep out of reach of children.
• DO NOT use this item near people with pacemakers or similar
prosthetics.
• Only use the provided charging cable.
• Use this item only for its intended purpose.
• Do not expose to extreme temperatures or moisture.
• For indoor use only.
• Do not expose to direct sunlight for extended periods of time.
• Thoroughly inspect products before every use. If the product
appears worn, frayed/splintered, cracked, or broken in any
manner, discontinue use and discard immediately.
CONTENTS
• Caddy
• Shelf
• Charge Pad
• Charge Cable
• Hook-and-Loop Fasteners (2)
CHARGE PAD SPECIFICATIONS
• Input Power: DC 12V 1.5A (Max)
• Output Power: 10W Charging
• Wireless Charging Version: Qi 1.2.4
CHARGE PAD COMPATIBILITY
• iPhone 8 series or newer and select android devices.
• QI wireless technology enabled devices.
• Non-metal phone cases up to 3 mm thick.
• May not be compatible with some Apple MagSafe cases.
THE 'QI' SYMBOL IS A TRADEMARK OF THE
WIRELESS POWER CONSORTIUM.
Attach Velcro strips to the back of the caddy to ensure
secure placement.

USING YOUR CADDY
2.
1.
5. 6. 7.
3. 4.
Lift your mattress and slide top flap of caddy underneath.
Attach hook-and-loop fasteners to the back of the caddy to
ensure secure placement.
Sticks to bed
Slide the shelf into either of the 2 pockets. Make sure the lip
of the shelf is inserted into the caddy.
Connect the provided cable to the charge pad then connect
the other end of the cable to a powered USB port.
Place the charge pad on the shelf. Make sure the shelf does not
tilt otherwise your device may fall off.
Remove any phone accessories. A non-metal phone case up
to 3 mm thick can be used.
Place your device on top of the pad matching the center of your
device to the center of the charge pad.
1
2
Attach Velcro strips to the back of the caddy to ensure
secure placement.
Attach Velcro strips to the back of the caddy to ensure
secure placement.
Attach Velcro strips to the back of the caddy to ensure
secure placement.
Attach Velcro strips to the back of the caddy to ensure
secure placement.
Attach Velcro strips to the back of the caddy to ensure
secure placement.
Attach Velcro strips to the back of the caddy to ensure
secure placement.
Attaches to back
hook-and-loop
fastener.