
- 2 -
OPERATION
1. Connect power supply to the controller by firmly
inserting the male end of the power supply into the
female end of the controller.
2. Plug the power supply into an AC outlet.
3. Align the slot on the male end of the controller with
the notch on the female end of the heating pad
and connect the plugs together.
4. Align the plastic nut on the male end with the
threads of the female connector and tighten
by turning clockwise.
NOTE: Do not turn on the heating pad while folded.
5. Press and hold the Power button for two seconds.
The default setting is Medium heat, and will
display an orange light.
6. Press the Power button once to change the setting to next level up.
7. To power off, press and hold the Power button for two seconds until the lights on the controller
turn off. NOTE: Unplug power supply from the AC outlet when not in use.
CLEANING AND MAINTENANCE
SAFETY WARNINGS
• Spot clean recommended
• Do not machine wash
• Hang dry
• Do not iron
• Do not use bleach or cleaning solvents
• Do not twist or wring
• Do not use on open wounds, sensitive skin areas, or in the presence of poor circulation.
• Check skin frequently during use to ensure rashes or burns are not developing.
• Shut off power if you experience any discomfort.
• The unattended use of this product by children or incapacitated persons may be dangerous.
• Consult your physician before use if you are pregnant or if pain persists.
• Do not leave the device unattended. Unplug when not in use.
WARRANTY/CUSTOMER SERVICE
Sharper Image branded items purchased from SharperImage.com include a 1-year limited
replacement warranty. For Customer Service, please call +1 (877) 210-3449.