Shaw HD Box User manual

Shaw HD Box.
Installation Instructions (Approximate hardware setup time: 10-15 minutes)
A: Do you have everything?
The following components are included in the package that your HD box came in:
Cable Cord (Coax) Power Pack HDMI Cable IR Receiver + Tether Cord
(Optional Use)
Shaw Remote Motorola HD Box
B: Time to hook up your new hardware
2. Find a location to put your new hardware that
will allow it to breathe.
3. Screw one end of the
included white cable cord
(with silver ends) in to your
wall cable outlet and the
other end in to CABLE IN
on the back of the HD box.
For an optimal viewing
experience, we recommend
using the included cable
cord instead of any others
that you might have around.
1. Your serial number, “Host SN,” is located on the back
of the HD box (next to the number three) and starts
with the letter “M.” Alternatively, you can nd the
serial number on the white sticker labeled “S/N” on
the HD box packaging.
Before you hook up your HD box, write your serial
number and account number below. You will need it
when you contact us to activate your new hardware.
Account Number:Serial Number:

4. Connect the included HDMI cable (black cable with
at gold ends) from the HD box to your TV. Both
video and audio travel through HDMI cable. Note
the input you plug your HDMI cable in to on the
back of your TV (i.e. HDMI 1, HDMI 2, etc.). For more
advanced audio/video setups, please refer to the
manufacturers guide included with your HD box.
5. Connect the included power adapter from the
wall power outlet to the HD box.
C: Turn on the power
1. Turn on your HD box by pressing the power button on the front of the box. After a couple of seconds the
blue power indicator will light up to conrm the box has power. The display on the front of your HD box may
display multiple messages once it is powered on, this is normal.
Power Indicator Power Button
HD_INSTALL_DEC12
2. Tune your TV to the High Denition (HD) input (i.e. HDMI 1, HDMI 2, etc.) that you plugged the HD box into in
Step B-4. You may see a blue box appear on your TV, this is normal.
D: Now we just need to get your box activated
1. Go back to Step 3 on the shaw.ca/activations site and select “My digital box is now connected.”