Shehds Hot Wheels LED Beam 8x10W User manual

1
-Maintenance
1.Please keep the light in dryness and avoiding use in wet place.
2.Using intermittenlly can be extended the life.
3.Attention to clean the fan and lens usually in order to get the ventilating effects and
lighting effects better.
4.Please do not wipe the crust using organic menstruum for avoid to damaged the
product.
-Statement
The product has well capability and intact packing when leave factory,All of the user
should comply with above warning item and manual ,any misuse cause of the damages are
not included in our guarantee,and also can’t be responsible for any malfunction &
problem owing to ignore the manual.
Please forgive that we will not be notice for technical change
-Attention Item
Hot Wheels LED Beam 8x10W

2
1.For guarantee the life of product,please do not put it on the wet place and not use it
the place over 40 degree.
2.Please don’t lay the product on the un-fixable or shakable place.
3.Ask for the professional to maintain the product in order to avoid the danger of get an
electric shock.
4.Power supply should not be changed over +&-10% while the light is using,it will be
decreased the life of lamp if the power is too high,but it will be influenced the luminosity
if the power is too low.
5.After power off,if it is need used again,please cool down over 20 minuter.
6.Please look round the manual for ensure the product can be used normally.
-Display Control Instruction
Welcome to use our light.The light uses energy-saving LED,long Product
life,shockproof,dustproof, DMX receiver and self-running feature, which can produce a
variety of vivid lighting effects,easy to operate, suitable for all types of entertainment
decoration,architectural lighting industry.
Instructions:Press the function key A cycled out the eight different function effects,digital
tube first two digits on behalf of which the current function(see menu).The last two digits
represent the functions in which the address code or speed parameters.Press the B or C
key to modify the parameter values.Press the D key to confirm.

3
-Product Introduction
* Power Supply:AC90--275V,50--60HZ
* Power consumption:80W
* Fixing lamp:LED 8*10W RGBW
* DMX-Control-channels:16/23 DMX Channels
* Shuttle:Flash rate:0--10HZ
* Dimmer:0-100% mechanic dimmer
* Long Lifespan LEDs(more than 60,000 hours)
-DMX Channel Summary-10 Channels Mode (r)
Channel
Function
Value
Function
1.
X axis
0-255
X axis
2.
Y1 axis
0-255
Y1 axis
3.
Y1 axis
0-255
Y1 axis Infinite rotation
4.
Y2 axis
0-255
Y2 axis
5.
Y2 axis
0-255
Y2 axis Infinite rotation
6.
Speed
0-255
PAN TILT Speed of rotation
7.
Dimming
0-255
R,G,B,W,total dimming
8.
Strobe
0-255
Strobe
9.
Function
selection
000-007
008-039
040-072
073-105
106-140
Color Gradual effect change Auto Mode
Color jump effect Auto Mode 1
Color jump effect Auto Mode 2
Color jump effect Auto Mode 3
Color jump effect Auto Mode 4

4
141-255
Color jump effect Auto Mode 5
10.
Auto run
016-255
Auto run mode
11.
Speed
0-255
Function Speed
12.
Red
0-255
Red dimming
13.
Green
0-255
Green dimming
14.
Blue
0-255
Blue dimming
15.
White
0-255
White dimming
16.
Reset
250-255
Reset system
-DMX Channel Summary-23 Channels Mode
Channel
Function
Value
Function
1.
X axis
0-255
X axis
2.
X axis
0-255
X axis Fine tuning
3.
Y1 axis
0-255
Y1 axis
4.
0-255
Y1 axis Fine tuning
5.
0-255
Y1 axis Infinite rotation
6.
Y2 axis
0-255
Y2 axis
7.
0-255
Y2 axis Fine tuning
8.
0-255
Y2 axis Infinite rotation
9.
Speed
0-255
PAN TILT Speed of rotation
10.
Dimming
0-255
R,G,B,W,total dimming
11.
Strobe
0-255
Strobe -RBG
12.
Function
000-007
Color Gradual effect change Auto Mode

5
selection
008-039
040-072
073-105
106-140
141-255
Color jump effect Auto Mode 1
Color jump effect Auto Mode 2
Color jump effect Auto Mode 3
Color jump effect Auto Mode 4
Color jump effect Auto Mode 5
13.
Auto run
016-255
Auto run mode
14.
Speed
0-255
Function Speed
15.
Red 1#
0-255
Red 1# dimming
16.
Green 1#
0-255
Green 1# dimming
17.
Blue 1#
0-255
Blue 1# dimming
18.
White 1#
0-255
White 1# dimming
19.
Red 2#
0-255
Red 2# dimming
20.
Green 2#
0-255
Green 2# dimming
21.
Blue 2#
0-255
Blue 2# dimming
22.
White 2#
0-255
White 2# dimming
23.
Reset
250-255
Reset system
-Display Control Instruction
Display
translate
Function
a.001
DMX
Channel address code
A.DDR
Address
DMX address
C.hnd
16ch
23ch
Channel
16/23 Channel control mode

6
S.lnd
SL 1
SL 2
AUTO
SOVN
Master
Slave
Auto
sound
Select light control mode
S.hnd
S.h 0
S.h 1
S.h 2
S.h 3
Sound
mode
Sound mode selection
sens
100
sensitivity
Voice sensitivity
B.lnd
Blan
Auto
Sovn
hold
BLac
Auto
Sound
Hold
When there is no signal, the lamp will
Reset/Auto run/Sound mode or Hold
L.ed
OFF
ON
LED
Display Backlight on/off
D.isp
OFF
ON
Display
Display Upside down 180 degree
R.pan
no
Yes
Pan
Set PAN original position.
tili
no
Yes
Tilt-1
Set TILT-1 original position.
til2
no
Yes
Tilt-2
Set TILT-2 original position.
rset
no
Yes
reset
Reset system value