Shehds Six Eye Laser User manual

1
Maintenance
1.Please keep the light in dryness and avoiding use in wet place.
2.Using intermittenlly can be extended the life.
3.Attention to clean the fan and lens usually in order to get the ventilating
effects and lighting effects better.
4.Please do not wipe the crust using organic menstruum for avoid to damaged
the product.
Statement
The product has well capability and intact packing when leave factory,All of the
user should comply with above warning item and manual ,any misuse cause of
the damages are not included in our guarantee,and also can’t be responsible
for any malfunction & problem owing to ignore the manual.
Please forgive that we will not be notice for technical change
Attention Item
1.For guarantee the life of product,please do not put it on the wet place and not
use it the place over 40 degree.
2.Please don’t lay the product on the un-fixable or shakable place.
3.Ask for the professional to maintain the product in order to avoid the danger
of get an electric shock.
4.Power supply should not be changed over +&-10% while the light is using,it
will be decreased the life of lamp if the power is too high,but it will be
influenced the luminosity if the power is too low.
5.After power off,if it is need used again,please cool down over 20 minuter.
6.Please look round the manual for ensure the product can be used normally.
Six Eye Laser RGB Lighting
Lighting

2
Product Introduction
Rated voltage: AC90--275V 50 ~ 60Hz ± 10%
Rated power: 150W
Laser source: semiconductor pump laser
Laser modulation: TTL
Laser wavelength: 638nm
Laser power: 3000MW (500MW * 6pcs)
Laser color: single red, single green, single blue
Laser system: precision stepping motor scanning system,Y-axis swing 190
degrees, X-axis laser head can swing.
Laser effect: laser Skynet beam performance, laser water line effect, laser
stroboscopic effect, LED beam sense, water stroboscopic effect, etc
Control mode: voice control, self-propelled, DMX512, master-slave effect
DMX channel: 11/19/24 channel optional
Use environment: Indoor
Applicable places: bar, KTV, performance bar, dance hall, hotel banquet hall,
entertainment place, etc
Working temperature: - 20 ° C ~ 45 ° C
6 eyes double head laser light monochrome (customized red, green and blue)
6 eyes double head laser light monochrome (RGB + RGB)
Laser power: 3000MW (500MW * 6pcs
Display Control Instruction
Welcome to use our light.The light uses energy-saving LED,long Product
life,shockproof,dustproof, DMX receiver and self-running feature, which can
produce a variety of vivid lighting effects,easy to operate, suitable for all types
of entertainment decoration,architectural lighting industry.

3
Instructions:Press the function key A cycled out the eight different function
effects,digital tube first two digits on behalf of which the current function(see
menu).The last two digits represent the functions in which the address code or
speed parameters.Press the B or C key to modify the parameter values.Press
the D key to confirm.
Display Control Instruction
Display
Function
DMX Address
A001-A512
Channel Mode
11/19/24Ch
Show Mode
Sound / Auto mode
Slave Mode
Master / Slave mode
Black Out
Standby On/Off
Sound State
Sound control On/Off
Sound Sense
Sound sensitive adjustment(0=Close, 100=High)
Pan Inverse
On/Off
Tilt1 Inverse
On/Off
Tilt2 Inverse
On/Off
Tilt3 Inverse
On/Off
Tilt4 Inverse
On/Off
Tilt5 Inverse
On/Off
Tilt6 Inverse
On/Off
Back Light
On/Off
Auto Test
Auto testing equipment
Fixture Time
Current device usage time
Firmware Version
Current Firmware Version
Defaults
Restore factory settings
System Reset
On/Off
Motor fine adjustment function setting
After entering the menu, press Enter for at least 3 seconds, the menu interface
displays "Pan offset", press Up or Down to adjust the motor position within the
value - 127---127, and then press Enter to save the set fine adjustment value.

4
11 DMX Channel Summary
Channel
Value
Function
CH1
0-255
Tilt 0-190°
CH2
0-255
Tilt speed
CH3
0-255
Total Pan 0-90°
CH4
0-255
Total Pan speed
CH5
0-132
Total laser Off
133-255
Total laser On
CH6
10-255
Total Strobe slow to fast
CH7
15-27
Laser effect auto mode 1
28-39
Laser effect auto mode 2
40-51
Laser effect auto mode 3
52-63
Laser effect auto mode 4
64-75
Laser effect auto mode 5
76-87
Laser effect auto mode 6
88-99
Laser effect auto mode 7
100-123
Laser effect auto mode 8
124-135
Laser effect auto mode 9
136-147
Laser effect auto mode 10
148-159
Laser effect auto mode 11
160-171
Laser effect auto mode 12
172-183
Laser effect auto mode 13
184-195
Laser effect auto mode 14
196-207
Laser effect auto mode 15
208-219
Laser effect auto mode 16
220-231
Laser effect auto mode 17
232-243
Laser effect auto mode 18
244-255
Laser effect auto mode 19
CH8
0-255
Laser effect Auto mode speed
CH9
16-45
Motor auto run mode1
46-75
Motor auto run mode2
76-105
Motor auto run mode3
106-135
Motor auto run mode4
136-165
Motor auto run mode5
166-195
Motor auto run mode6
196-225
Motor auto run mode7
226-240
Sound control mode1
241-255
Sound control mode2
CH10
0-255
Motor speed adjust
CH11
0-255
Reset

5
19 DMX Channel Summary
Channel
Value
Function
CH1
0-255
Tilt 0-190°
CH2
0-255
Pan speed
CH3
0-255
Tilt1 0-90°
CH4
0-255
Tilt2 0-90°
CH5
0-255
Tilt3 0-90°
CH6
0-255
Tilt4 0-90°
CH7
0-255
Tilt5 0-90°
CH8
0-255
Tilt6 0-90°
CH9
0-255
Tilt total speed
CH10
0-127
Total laser On
128-255
Total laser Off
CH11
10-255
Total Strobe slow to fast
CH12
0-255
0-127 Laser1 off 128-255 Laser1 On
CH13
0-255
0-127 Laser2 off 128-255 Laser2 On
CH14
0-255
0-127 Laser3 off 128-255 Laser3 On
CH15
0-255
0-127 Laser4 off 128-255 Laser4 On
CH16
0-255
0-127 Laser5 off 128-255 Laser5 On
CH17
0-255
0-127 Laser6 off 128-255 Laser6 On
CH18
56-80
Auto mode 1
81-105
Auto mode 2
106-130
Auto mode 3
131-155
Auto mode 4
156-180
Auto mode 5
181-205
Sound control mode 1
206-230
Auto mode 6
231-255
Sound control mode 2
CH19
0-255
Auto mode speed and sound control sensitive
24 DMX Channel Summary
Channel
Value
Function
CH1
0-255
Tilt 0-190°
CH2
0-255
Tilt fine 2°
CH3
0-255
Tilt speed
CH4
0-255
Pan1 0-90°
CH5
0-255
Pan2 0-90°
CH6
0-255
Pan3 0-90°
CH7
0-255
Pan4 0-90°

6
CH8
0-255
Pan5 0-90°
CH9
0-255
Pan6 0-90°
CH10
0-255
Total Pan 0-90°
CH11
0-255
Total Pan speed
CH12
0-132
Total laser Off
133-255
Total laser On
CH13
10-255
Total Strobe slow to fast
CH14
0-255
0-132 Laser1 off 133-255 Laser1 On
CH15
0-255
0-132 Laser2 off 133-255 Laser2 On
CH16
0-255
0-132 Laser3 off 133-255 Laser3 On
CH17
0-255
0-132 Laser4 off 133-255 Laser4 On
CH18
0-255
0-132 Laser5 off 133-255 Laser5 On
CH19
0-255
0-132 Laser6 off 133-255 Laser6 On
CH20
15-27
Laser effect auto mode 1
28-39
Laser effect auto mode 2
40-51
Laser effect auto mode 3
52-63
Laser effect auto mode 4
64-75
Laser effect auto mode 5
76-87
Laser effect auto mode 6
88-99
Laser effect auto mode 7
100-123
Laser effect auto mode 8
124-135
Laser effect auto mode 9
136-147
Laser effect auto mode 10
148-159
Laser effect auto mode 11
160-171
Laser effect auto mode 12
172-183
Laser effect auto mode 13
184-195
Laser effect auto mode 14
196-207
Laser effect auto mode 15
208-219
Laser effect auto mode 16
220-231
Laser effect auto mode 17
232-243
Laser effect auto mode 18
244-255
Laser effect auto mode 19
CH21
0-255
Laser effect Auto mode speed
CH22
16-45
Motor auto run mode1
46-75
Motor auto run mode2
76-105
Motor auto run mode3
106-135
Motor auto run mode4
136-165
Motor auto run mode5
166-195
Motor auto run mode6
196-225
Motor auto run mode7
226-240
Sound control mode1
241-255
Sound control mode2
CH23
0-255
Motor speed adjust
CH24
0-255
Reset