Shehds LED Beam User manual

1
Maintenance
1.Please keep the light in dryness and avoiding use in wet place.
2.Using intermittenlly can be extended the life.
3.Attention to clean the fan and lens usually in order to get the ventilating effects and lighting effects
better.
4.Please do not wipe the crust using organic menstruum for avoid to damaged the product.
Statement
The product has well capability and intact packing when leave factory,All of the user should comply with
above warning item and manual ,any misuse cause of the damages are not included in our
guarantee,and also can’t be responsible for any malfunction & problem owing to ignore the manual.
Please forgive that we will not be notice for technical change
Attention Item
1.For guarantee the life of product,please do not put it on the wet place and not use it the place over 40
degree.
2.Please don’t lay the product on the un-fixable or shakable place.
3.Ask for the professional to maintain the product in order to avoid the danger of get an electric shock.
LED Beam 7x12W RGBW Moving Head Lighting

2
4.Power supply should not be changed over +&-10% while the light is using,it will be decreased the life
of lamp if the power is too high,but it will be influenced the luminosity if the power is too low.
5.After power off,if it is need used again,please cool down over 20 minuter.
6.Please look round the manual for ensure the product can be used normally.
DMX Channel Summary-15 Channels Mode
Disp
lay
Con
trol
Inst
ruct
ion
Channel
DMX value
function
CH1
000-255
X
CH2
000-255
Y
CH3
000-255
X Fine
CH4
000-255
Y Fine
CH5
000-255
Dimmer(0-100%)
CH6
000-255
Strobe(0-100%)
CH7
000-255
Red(0-100%)
CH8
000-255
Green(0-100%)
CH9
000-255
Blue(0-100%)
CH10
000-255
White(0-100%)
CH11
000-255
Color change
CH12
000-255
(inner
program)
0-10 before 11 channel can use 11-120
change 121-180 gradual change
181-244 mix 245-255 voice control
CH13
000-255
(inner program
speed)
Jump from fast to slow
0 is fast 255 is slow
CH14
000-255(X Y
Speed adjust)
from fast to slow
0 is fast 255 is slow
CH15
000-255(reset)
00-244 before 14 channel can use
245 -255 is reset
LCD DISPLAY MENU
number
instruction

3
Disp
lay
Cont
rol
Instr
ucti
on
Welco
me to
use
our
light.T
he light uses energy-saving LED,long Product life,shockproof,dustproof, DMX
receiver and self-running feature, which can produce a variety of vivid lighting
effects,easy to operate, suitable for all types of entertainment
decoration,architectural lighting industry.
E
A:Function
B:Up
C:Down
D:Enter
E:LED Display
1
DMX Address
DMX Address
2
ADJ-R(0-255)
press the up and down keys to
adjust red light brightness
(0-255),press the enter to confirm
3
ADJ-G(0-255)
press the up and down keys to
adjust green light brightness
(0-255),press the enter to confirm
4
ADJ-B(0-255)
press the up and down keys to
adjust blue light brightness
(0-255),press the enter to confirm
5
ADJ-W(0-255)
press the up and down keys to
adjust white light brightness
(0-255),press the enter to confirm
6
Program(001)
press the up and down keys to
select the inner program,press the
enter to confirm
7
Speed(0-16)
press the up and down keys to
select the inner program
speed,press the enter to confirm
8
Test mode
press the up and down keys to
select the voice control and slave
run
9
reset
Press the enter to reset

4
A B C D
Instructions:Press the function key A cycled out the eight different function
effects,digital tube first two digits on behalf of which the current function(see
menu).The last two digits represent the functions in which the address code or
speed parameters.Press the B or C key to modify the parameter values.Press the
D key to confirm.
Product Introduction
*Power Supply:AC90--275V,50--60HZ
* Power consumption:84W
* Fixing lamp:LED 7×12W RGBW
* DMX-Control-channels:7/15 DMX Channels
* Shuttle:Flash rate:0--10HZ
* Dimmer:0-100% mechanic dimmer
* Long Lifespan LEDs(more than 60,000 hours)