1. Add appropriate cleaning solution into the tank and connect the power. The ultrasonic working
time display is 5 min at default.
2. Adjust ultrasonic working time: time increases 1 min for each press of the "time increase" key and
decreases 1 min for each press of the "time decrease" key.
3. Press On/Off to start the cleanser and press again to stop operation.
Common Cleansing Method
1.General cleansing
Use general clean water.。
Immerse the article or the part to be cleansed completely in water and keep the water level between
maximum and minimum levels.
2.In-depth cleansing
Add about 15-20 ML (three bottle caps) of household tableware detergent into clean water to speed
up stain decomposition. Then change the water. Add at least 10-ml detergent with disinfection
function and cleanse or rinse again the desired article or part.
Notes on Cleasing Some Articles
1. Eyeglasses: Add tap water into the tank and keep the water level between maximum and
minimum. Start the cleanser. The best cleansing duration is 300s.
2. Jewelry: Add tap water into the tank and keep the water level between maximum and minimum.
Start the cleanser. The best cleansing duration is 240s.
3. Watch / old coin: Add tap water into the tank and keep the water level between maximum and
minimum. Start the cleanser. The best cleansing duration is 300s.
4. VCD / DVD: Add tap water into the tank and keep the water level between maximum and
minimum. Start the cleanser. The best cleansing duration is 300s.
5. Tooth socket / Toothbrush and other oral care products: Add appropriate warm boiled water and a
little salt (concentration: about 0.9% NaCl) into the tank. Start the cleanser. The best cleansing
duration is 600s (300s/time, cleanse twice).
6. Baby / children products: Add appropriate warm boiled water and a little salt (concentration:
about 0.9% NaCl) into the tank. Start the cleanser. The best cleansing duration is 600s (300s/time,
cleanse twice).
Warranty Card