Shoprider 6Runner 14HD User manual

Mid-wheel Powerchair
USER MANUAL
Model Name :
6Runner 14HD (888WNLLHD)

9/30/2011
2
Table of Contents
INTRODUCTION ................................................................................. 3
EMI WARNING ....................................................................................4
ELECTROMAGNETIC INTERFERENCE FROM RADIO WAVES ....................4
POWERED CHAIR ELECTROMAGNETIC INTERFERENCE (EMI)................. 5
SAFETY INSTRUCTIONS................................................................6-7
FEATURE GUIDE................................................................................ 8
GETTING TO KNOW YOUR SHOPRIDER………………………………..9-10
THE JOYSTICK CONTROLLER (VR2)......................................................11
LOCKING / UNLOCKING THE JOY STICK CONTROLLER……………………..12
DRIVE/FREEWHEEL MECHANISM..........................................................13
DRIVING YOUR POWERCHAIR .....................................................14
CARING FOR YOUR POWERCHAIR .............................................. 15
GENERAL MAINTENANCE AND LUBRICATION...........................16
BATTERIES AND BATTERY CHARGING..................................17-19
TROUBLESHOOTING ...................................................................... 20
SPECIFICATIONS............................................................................. 21
NOTE ................................................................................................. 22
DISCLAIMER................................................................................23-24

9/30/2011
3
INTRODUCTION
Congratulations on insisting on the best. Shoprider Powerchairs are the
ultimate combination of style and comfort. The 6Runner features support easy
maneuverability and smooth control for today’s active lifestyle.
The innovative design of the 6Runner includes articulating double frames that
move in any direction. This intelligent feature keeps all 6 wheels on the
ground at all times, even when driving on uneven terrain, hence the name
6Runner. Combine this with the programmable joystick controller, fully
adjustable footplate and arm assemblies, flat-free tires, deluxe (reclining)
captain seat, easy access batteries and quick-change color shrouds. For a
complete powerchair package we know that your 6Runner Powerchair will
provide, many years of mobility, and freedom to go out into the world.
This manual contains important information regarding the safe use of your
Shoprider Powerchair. Please read this manual carefully and thoroughly
before using your Powerchair and make sure you understand all the
instructions.

9/30/2011
4
EMI WARNING
Electromagnetic Interference (EMI) from Radio Wave Sources
Powered electric chairs may be susceptible to electromagnetic interference,
which is a kind of interfering electromagnetic energy (EM) emitted from sources
such as radio stations, TV stations, amateur radio (HAM) transmitters, two-way
radios and cellular phones. The interference (from radio wave sources) can
cause the power chairs to release its brakes, move by itself or move in
unintended directions. This can also permanently damage the powered chair’s
control system.
The sources of radiated EMI can be broadly classified into three types:
1. Hand-held portable transceivers (transmitters-receivers) with the antenna
mounted directly on the transmitting unit. Examples include: citizens band
(CB) radios, “walkie talkies”, security, fire and police transceivers, cellular
telephones and other personal communication devices
NOTE: Some cellular telephones and similar devices transmit signals
while they are ON, even when not being used.
2. Medium-Range mobile transceivers, such as those used in police cars, fire
trucks, ambulances and taxis. These usually have the antenna mounted
on the outside of the vehicle.
3. Long-Range transmitters and transceivers, such as commercial broadcast
transmitters (radio and TV broadcast antenna towers) and amateur (HAM)
radios.
NOTE: Other types of hand-held devices, such as cordless phones,
laptop computers, AM/FM radios, TV sets, CD players, cassette players
and small appliances such as electric shavers and hair dryers, so far, as
we know, are not likely to cause problems to your Powerchair.

9/30/2011
5
Powered Chair Electromagnetic Interference (EMI)
Because EM energy rapidly becomes more intense as one moves closer to the
transmitting antenna (source), the EM fields from hand-held radio sources
(transceivers) are of special concern. It is possible to unintentionally bring high
levels of EM energy very close to the Powerchair’s control system while using
these devices. This can affect Powerchair movement and braking. Therefore,
the warnings listed below are recommended to prevent possible interference
with the control system of the Powerchair.
WARNINGS
1. Do not operate hand-held transceivers (transmitters-receivers), such as citizens
band (CB) radios, or turn ON personal communication devices, such as cellular
phones, while the Powerchair is turned ON.
2. Be aware of nearby transmitters, such as radio or TV stations, and try to avoid
close contact.
3. If unintended movement or brake release occurs, turn the Powerchair OFF
as soon as it is safe.
4. Be aware that adding accessories or components, or modifying the Powerchair,
may make it more susceptible to EMI.
NOTE! There is no easy way to evaluate the overall immunity of the
Powerchair.
5. Report all incidents of unintended movement or braking to the Powerchair
provider, and note whether there are sources of EMI nearby.

9/30/2011
6
Safety Instructions
1. Do not drive the Powerchair without reading this manual.
2. Do not exceed the safe climbing maximum angle (Fig. 4).
3. Do not use the joystick in an erratic manner when going up or down an
incline.
4. Do not carry passengers or exceed the maximum weight limit (Table 2).
5. Do not turn off the joystick controller by switching the On/Off Button
when moving at any speed. This will bring the electromagnetic brakes on
immediately and could cause damage to the joystick controller.
6. Do not drive over uneven and soft terrain (soft dirt, loose gravel, deep
grass).
7. Do not attempt to mount a curb height above 2 inches.
8. Do not mount or dismount the Powerchair unless the electromagnetic
brakes are engaged and the joystick controller is off.
9. Do not operate the Powerchair if the unit is in freewheel mode.
10. Do not use on the road, except when crossing between sidewalks.
11. Do not sit on the Powerchair when in a vehicle, but transfer to a vehicle
seat.
12. Do not exceed any grade over 6 degrees (10%).
13. Always stop fully before changing forward or reverse direction.
14. Always engage a slow speed when going down gradients (move the
joystick slowly towards center position to reduce the speed).
15. Always approach and climb over curbs at slow speed.
16. Always approach curbs and gradients at 90 degrees.
17. Always use the safety belt.
18. Always keep feet on the footrest while driving.
19. Always make sure the batteries are fully charged before setting out on a
journey.
20. Always charge the Powerchair in a well ventilated area to prevent any
possible risk.

9/30/2011
7
21. Always check that the drive wheels are engaged. Someone may have
left the Powerchair in freewheel mode.
22. Always reduce your speed when turning sharply.
23. Avoid turning sharply on a slope or gradient.
24. To brake in an emergency simply release the joystick.
25. Always try to find a “dropped curb” or “curb cutout” whenever possible.
26. Always keep your Powerchair properly maintained.
27. Never try to use your Powerchair beyond it’s limitations as described in
this manual.
28. Always put seat in most upright position whenever driving up an incline.
Important Notes
The Shoprider Powerchair is designed to assist in your individual mobility needs.
Any usage outside of the guidelines in this manual may result in damage to the
chair or injury to the user or third party.
Please do not lift the wheelchair by the armrests.
First Time Use
Prior to using your 6Runner Powerchair for the first time, you must charge the
batteries fully (refer to Battery Charging Procedures). Charging may take up to
12 hours. Charging the batteries completely prior to first time use will benefit
battery efficiency and life of batteries.

9/30/2011
8
Feature Guide
(1) Removable Armrests with Width, Height & Angle Adjustment (Flips Up for
Easy Sideways Transfer)
(2) Programmable VR2 Joystick Controller with Adjustable speed & Battery
Life Indicator.
(3) Charging Port
(4) 21*21 Deluxe Reclining Captain Seat Deluxe Captain Seat (Option 1)
(5) 23*19.5 Deluxe Wider Captain Seat (Option 2)
(6) Adjustable Length, Height, Angle Foot Plate
(7) Front Castor Assy (7” flat free tire)
(8) Frame Serial Number (13 alphanumeric characters)
(9) Rear Castor Assembly (7” flat free tire)
(10)Adjustable Seat Height
Figure 1
5
1
2
4
10
3
6
7
8
9

9/30/2011
9
Getting to Know Your Shoprider Powerchair
The Seat and Arm Assemblies
The seat is built for comfort, style, and stability. Your seat comes with a reclining
back for comfort. The flip-up arm-rests are especially built for easy side access
for getting in and out of your 6Runner, with the greatest of ease. The arm-rests
have a built in height adjustment knob, that adjusts the arm pad to a comfortable
level for the driver. The seat is covered in a durable long lasting black/grey vinyl
for comfort and style.
Adjustable footplate
The footplate adjusts to fit to the users size and comfort. It adjusts length and
height wise to help in comfort and stability for the user. Using hex key wrench
and stamped wrench to remove locking bolt and nut from the receiver.
Flip up
armrest
lever
Armrest
height
adjustment
lever
Remove locking bolt
and nut and make the
adjustments of the
length and height of
the footplate

9/30/2011
10
Seat Height Adjustment
And Easy Battery Access
1. Tightening knob that allows for
the seat to be removed if needed,
if not, there is a pivot point that
allows for the seat to move up
and away from the base.
2. Adjustment pins that can be
used to adjust the height of the
seat to fit the user.
3. Release levers; allow for the
rear of the seat to be lifted and
moved away from the base for
easy battery access, without
removing entire seat.
4. U-Hooks hold the seat in place.
5. Bottom shroud is easily
popped off, to allow for battery
access.
6. Hex head screws that are used
to fasten the mounting plate for
main controller. Batteries can be
easily accessed and changed after
the removal of main controller
assembly.
1
4
3
5
2
6

9/30/2011
11
The Joystick Controller (VR2)
1. On-Off Button: This button turns the joystick controller
(hereinafter referred to as VR2) on and off. Do not use
this button to stop the power chair, except in an
emergency.
2. Battery Gauge: This is a 10-segment display, which
indicates if the VR2 is switched on and gives the state
of charge of the battery. Additionally, any faults in the
Powerchair electrical system are also indicated by this
display. Refer to Table 1 for more details.
3. Maximum Speed Indicator: This is a 5-segment
display, which indicates the maximum speed setting
selected.
4. Horn Button: This button operates the Powerchair’s
horn.
5. Speed Decrease Button: This button decreases the maximum speed.
6. Speed Increase Button: This Button Increases the maximum speed.
7. Joystick: This controls the speed and direction of the Powerchair. Push
the joystick in the direction you want to go. The further you push it, the
faster the speed will be. Releasing the joystick will automatically
engage the brakes and stop the Powerchair.
8. Charging Port: This is the primary charging port for the 6Runner. When
using this charging port only plug into this port with the qualified Shoprider
charger certified by the original manufacturer of the Powerchair. This port
should not be used as a power supply for any other electrical devices.
Doing either of these as stated above will void the warranty of the
Powerchair.
Note: The controller can be fitted to suit either right or left-handed users.
Please contact your provider for further assistance.
8
7
3
6
2
1
4
5
Figure 2

9/30/2011
12
Locking/Unlocking the VR2 Joystick
****PLEASE NOTE****
LOCK MODE: The VR2 controller may be programmed to have a lock mode
function enabled to prevent unauthorized use. The locking method is achieved
through a sequence of key presses and joystick movements, as detailed below.
To lock Powerchair controller:
While the controller is switched on, depress and hold the on/off button.
After 1 second the controller will bleep. Now release the on/off button.
Push the joystick forward until the controller bleeps.
Push the joystick in reverse until the controller bleeps.
Release the joystick, there will be a long bleep.
The Powerchair controller is now locked.
To unlock the Powerchair controller:
Use the on/off button to switch the controller on. The maximum
speed/profile indicator will be rippling up and down.
Push the joystick forward until the controller bleeps.
Push the joystick in reverse until the controller bleeps.
Release the joystick, there will be a long bleep.
The Powerchair is now unlocked.
SLEEP MODE: If the controller is left on and not used for more than ten minutes,
the controller will automatically “go to sleep”. This is recognized by a slow
intermittent flash of the battery indicator lights. Simply turn the controller off and
back on to reset.
function while the drive mechanism is disengaged (in freewheel).
Both left and right sides must be in drive mode for power chair to operate.
Otherwise the Powerchair motors will spin, but the unit will not move, until
both freewheel levers are engaged. Unit will spin in circles if only one side
is in drive mode.
*** DO NOT PUT INTO DRIVE MODE WHILE MOTORS ARE SPINNING ****

9/30/2011
13
The drive/freewheel levers are found toward the rear of the Powerchair
(Figure 3). These levers will allow you to disengage the drive mechanism
(When the levers are pulled out away from the unit) the Powerchair is in
freewheel mode. ***NOTE*** the VR2 will not work in Freewheel mode. When
the levers are pushed in (towards the inside of the unit) the motors are
engaged and the powerchair is in drive mode.
Freewheel lever **NOTE** There is a lever on opposite side
FIGURE 3
Sticker will also help
indicate in which
position the brakes are
locked or unlocked.

9/30/2011
14
Driving Your Shoprider Powerchair
Ramps, Slopes and Cambers
The indoor/outdoor Powerchair has the ability to negotiate ramps, slopes and
cambers of a low to medium gradient. It is of the utmost importance that the
following points are observed:
1. Never attempt to go up or down an incline which has a rough, wet or
slippery surface (loose gravel, tree roots, wet grass, polished floor, etc.)
2. Always approach an incline head on, not at an angle
3. Always travel at a speed that you are comfortable with and that you feel in
complete control
4. Avoid sudden or erratic action with the joystick
5. Always have the reclining seat in the most upright position when driving
up an incline
6. When riding along in a straight line you may experience “veering to one
side”. This is due to the natural camber in the construction of the
pavement. To correct this you simply have to steer slightly against it, as
you continue to move forward
FIGURE 4

9/30/2011
15
Caring for Your Shoprider 6Runner Powerchair
First Time Use
Prior to using your Powerchair for the first time, you must charge the batteries
fully (refer to Battery Charging Procedures). Charging may take up to 12 hours.
Charging the batteries completely prior to first time use will benefit battery
efficiency and battery life.
Tires
Since your tires are flat free tires, there is no need to ever worry about tire air-
pressure. When tread is worn, it is highly recommended to replace tires.

9/30/2011
16
General Maintenance and Lubrication
Inspection for loose wheel bolts, seat and arm tightening bolts, castor nuts
and other nuts and bolts is recommended on a regular basis.
Most lubricated components on the Powerchair are designed to be
maintenance free and are sealed. Therefore, lubrication is not required for
these components. However, the driving wheel axles and seat post should
always have a very light coat of multi-purpose grease. **NOTE** Never
put grease or oil in the breather cap located on the top of each worm gear.
DO NOT USE TOO MUCH GREASE!
Drips may stain or damage carpets, furnishings, etc.
It is recommended that the driving axles (inside the drive wheel assembly)
and castor assemblies be checked and cleaned occasionally for hair and
debris build-up, which will hinder the performance of the unit.
Check the 6Runner’s batteries on a regular basis. For extended battery
life, it is highly recommended that the batteries be fully charged after each
use. If the batteries are weak, severely discharged or old, a variety of
problems may occur with the unit including charging problems, reduced
speed, loss of range, loss of charge capacity and others. Please contact
your provider for battery replacement and proper disposal. Note: Charging
your batteries daily will enhance the life of your batteries. If the batteries
are left unattended for extended periods of time, it is recommended that
they be left in a fully charged state. Leaving your batteries in a discharged
state, or not charging them regularly will diminish the life of your batteries
and cause irreversible damage to your batteries.

9/30/2011
17
Batteries & Battery Charging
Batteries
The Shoprider 6Runner Powerchairs are designed to operate on two 12 volt /
50Ah or 75Ah sealed lead acid aka SLA (AGM or gel-cell type) maintenance free
batteries. The life of the batteries may be affected by temperature, terrain, weight
of user, driving methods, and care of batteries. The active user will need to
charge the batteries after using approximately 30% of battery capacity. As an
inactive user, only using from once a week to every other day, the recharge point
would be at 50% of discharge (Refer to Figure 5). For extended battery life, it is
highly recommended that these guidelines be followed. You cannot over charge
the batteries.
•Active users: Charge daily
•Occasional users: Charge your battery before any outing and always after
active use.
*Keeping the batteries charged extends the life of the batteries*
SLA batteries should be kept fully charged at all times. They must not be left in a
discharged state if the unit is not being used for some time or the batteries will be
permanently damaged and will no longer hold a charge. The SLA batteries
should be checked once a month and kept charged as needed. Typically SLA
batteries have up to about 400 charging cycles.
Green Top
3 Bars
Full battery charge.
Red Bottom
3 Bars
Flashing. Danger, you must
stop and recharge the
batteries. Failure to do so
may result in damage of
batteries.
Amber Middle
4 Bars
From 30% - 50%
discharge. Batteries
will
need charging.
Figure 5
NEVER DISCHARGE BATTERIES TO RED BARS OF INDICATOR!

9/30/2011
18
Batteries & Battery Charging
BATTERY CHARGING (UNITS EQUIPPED WITH OFF-BOARD
CHARGER)
Familiarize yourself with the safety information below prior to using the battery
charger.
SAFETY INFORMATION
1. Read the battery charger instructions in this manual and in the manual
supplied with the charger prior to charging the batteries.
2. Do not remove the grounding prong from the plug. Removal of the
grounding prong could result in an electrical hazard.
3. Only plug the charger into a 3-pronged electrical outlet, or an approved 3-
pronged adapter for use with a 2 pronged electrical outlet.
4. Make sure that the wall outlet being used is not controlled by a wall switch
that can be easily turned off.
5. Do not use an extension cord to plug in the charger.
6. Do not leave the charger plugged into the charger port if the charger is not
charging the unit.
7. Use only the off-board charger supplied with this unit. Never use an
automotive type battery charger. Contact your supplier if a replacement
off-board charger is needed.
8. Inspect the battery charger, wiring and connections for damage prior to
each use.
9. Do not open the battery charger case.
10.The battery charger is supplied with cooling slots. Do not insert objects
through the slots.
11.Make sure that the charger is not in contact with inflammable materials at
any time.
12.The off-board charger is for indoor use only.
13.Explosive gases may be generated while charging the batteries. Keep the
power chair and battery charger away from sources of ignition such as
flames or sparks and provide adequate ventilation when charging the
batteries.
14.Do not allow children to play near the power chair while the batteries are
charging. It is also recommended that the batteries not be charged while
the power chair is occupied.

9/30/2011
19
Batteries & Battery Charging
CHARGING INSTRUCTIONS
1. Make sure that the main switch on the charger is in the off position.
2. Connect the charger to the charging port at the front of the VR2 (item 8 in
Figure.2)
3. Plug the charger into the wall outlet.
4. Turn the main switch on the charger to the on position.
CHARGER INDICATION LIGHTS
Blinking Green – Power on at stand-by mode,
Steady Orange – Battery charging,
Steady Green – Charging complete.
Please refer to the LED indicator description based on charging status of the charger.
BATTERY INFORMATION
1. Make sure to use two batteries of the exact same chemistry, amp hours,
and capacity.
2. Fully recharge new batteries prior to initial use.
3. It is recommended that the batteries be charged for 8 to 14 hours after
daily use.
4. If the power chair is used infrequently (Once a week or less) the batteries
will need to be charged once a week for 12 to 14 hours.
5. Do not charge the batteries for more than 24 hours at a charging cycle.
6. Batteries that go below a minimum voltage due to not being charged will
be unable to be re-charged.
7. If you do not plan on using your power chair for an extended period it is
recommended that you fully charge the batteries and then disconnect the
battery harness prior to storage. Store the power chair in a warm dry
environment. Never store the batteries where extreme temperatures are
possible. Never attempt to charge a frozen battery. A cold or frozen
battery should be warmed for several days prior to charging.
Buttons to
Release

9/30/2011
20
Troubleshooting
The Self-Help Guide (Table 1) is intended to assist in the location of a fault that
may occur in a certain part of the Powerchair.
If after checking the fault from the table below and the fault is still showing, do not
use the Powerchair. Turn off the power and consult your provider immediately.
Table 1
BATTERY GAUGE
POSSIBLE FAULT
10 Bars flash
An excessive voltage has been applied to the control
system. This is usually caused by a poor battery
connection.
9 Bars flash
The parking brakes have a bad connection. Check the
parking brake and motor connections.
8 Bars flash
A control system fault is indicated. Make sure that all
connections are secure.
7 Bars flash
A joystick fault is indicated. Make sure that the joystick is in
the center position before switching on the control system.
6 Bars flash
Battery charger connected.
5 Bars flash
Right-hand motor wiring fault.
4 Bars flash
Right-hand motor disconnected.
3 Bars flash
Left-hand motor wiring fault.
2 Bars flash
Left-hand motor disconnected.
1 Bar flashes
Low battery voltage.
Battery/ Charging Troubleshooting
– If the charger indicator light goes to green within a few minutes after being plug
in and doesn’t charge the batteries the batteries may be over discharged and
may require additional service or replacement. Contact your provider for
assistance.
If the charger indicator light goes immediately to green when plugged in to
charge, the problem is likely a blown fuse, popped circuit breaker (push reset
button) or similar. Contact your provider for assistance. If the charger does not
come on at all when plugged in, check the charger fuse if applicable, then call
your provider.