Show Tec Performer Profile 650 Q5 V1 User manual

Performer Profile 650 Q5 V1
Highlite International B.V. –Vestastraat 2 –6468 EX –Kerkrade –the Netherlands
Ordercode: 33064
MANUAL
ENGLISH

1
Ordercode: 33064
Performer Profile 650 Q5
Table of contents
Warning ...............................................................................................................................................................................3
Safety Instructions .........................................................................................................................................................3
Operating Determinations ..........................................................................................................................................5
Rigging ............................................................................................................................................................................5
Connection with the mains.........................................................................................................................................6
Return Procedure..........................................................................................................................................................7
Claims..............................................................................................................................................................................7
Description of the device.................................................................................................................................................8
Features ..........................................................................................................................................................................8
Optional accessories....................................................................................................................................................8
Overview ........................................................................................................................................................................8
Backside .......................................................................................................................................................................10
Installation.........................................................................................................................................................................11
Set Up and Operation .....................................................................................................................................................11
Lens Locations .............................................................................................................................................................11
Focusing the beam ....................................................................................................................................................11
Color frame retaining clip .........................................................................................................................................12
Color Notes ..................................................................................................................................................................12
Shaping the beam......................................................................................................................................................12
Shutters..........................................................................................................................................................................13
Drop-in Iris-Slot..............................................................................................................................................................13
Rotating the barrel assembly....................................................................................................................................14
Installation with clamp...............................................................................................................................................14
Setting the angle ........................................................................................................................................................15
Control Modes.............................................................................................................................................................15
One Performer (Static Mode)................................................................................................................................15
One Performer (Preset colors) ...............................................................................................................................15
Multiple Performers (Master/Slave control) ........................................................................................................16
Multiple Performers (DMX Control) .......................................................................................................................17
Fixture Linking...............................................................................................................................................................18
Data Cabling...............................................................................................................................................................18
Control Panel ...............................................................................................................................................................19
Control Mode ..............................................................................................................................................................19
DMX Addressing ..........................................................................................................................................................19
Menu Overview...........................................................................................................................................................20
Main Menu Options....................................................................................................................................................21
1. Static Colors..........................................................................................................................................................21
2. Preset Colors .........................................................................................................................................................22
3. DMX Address ........................................................................................................................................................22
4. Master/Slave Mode.............................................................................................................................................22
5. Personality (DMX channel modes)...................................................................................................................22
6. Settings...................................................................................................................................................................23
6.1. Upload ................................................................................................................................................................23
6.2. Reset ...................................................................................................................................................................23
6.3. Dimmer ...............................................................................................................................................................23
6.4. Send ....................................................................................................................................................................23
6.5. DMX Error............................................................................................................................................................24
6.6. Performance settings.......................................................................................................................................24
6.7. PWM rate............................................................................................................................................................24
6.8. Color temperature ...........................................................................................................................................24
7. Safety lock ............................................................................................................................................................24
8. Calibration ............................................................................................................................................................25
8.1. White color calibration....................................................................................................................................25
9. Information............................................................................................................................................................25

2
Ordercode: 33064
Performer Profile 650 Q5
DMX Channels .............................................................................................................................................................26
8 channels (HSIC).....................................................................................................................................................26
8 channels (SIMPLE).................................................................................................................................................27
6 channels (SDO) .....................................................................................................................................................27
11 channels (COLOR 8BIT) .....................................................................................................................................29
17 channels (COLOR 16BIT) ...................................................................................................................................30
Cleaning............................................................................................................................................................................32
Cleaning 19°, 26°, 36°, and 50° glass lenses ..........................................................................................................32
Cleaning the reflector................................................................................................................................................32
Maintenance....................................................................................................................................................................33
Replacing the Fuse.....................................................................................................................................................33
Troubleshooting ...............................................................................................................................................................33
No Light.........................................................................................................................................................................33
No Response to DMX..................................................................................................................................................33
Product Specifications....................................................................................................................................................35
Dimensions........................................................................................................................................................................36
Notes ..................................................................................................................................................................................37

3
Ordercode: 33064
Performer Profile 650 Q5
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
Showtec Performer Profile 650 Q5
1 safety cable
User manual
LED Expected Lifespan
LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration
of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular
optimum conditions. For this reason, when all color LEDs are used at their fullest intensity, life of the LEDs is
significantly reduced. If improving the lifespan is of higher priority, place care in providing for lower
operational temperatures. This may include climatic-environmental and the reduction of overall
projection intensity.
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
be qualified
follow the instructions of this manual

4
Ordercode: 33064
Performer Profile 650 Q5
Before the initial start-up, please make sure that there is no damage caused by transportation.
Should there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes contained in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
•Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
•Never remove warning or informative labels from the unit.
•Never use anything to cover the ground contact.
•Never lift the fixture holding it by the projector-head, as the mechanics may be damaged. Always
hold the fixture by the transport handles.
•Never place any material over the lens.
•Never look directly into the light source.
•Never leave any cables lying around.
•Never loosen the screws of the rotating gobo otherwise you risk opening of the ball bearing.
•Do not insert objects into air vents.
•Do not connect this device to a dimmerpack.
•Do not switch the device on and off in short intervals, as this will reduce the device’s life.
•Do not touch the device’s housing bare-handed during its operation (housing becomes very hot).
Allow the fixture to cool for at least 5 minutes before handling.
•Do not shake the device. Avoid brute force when installing or operating the device.
•Only use the device indoors, avoid contact with water or other liquids.
•Only operate the fixture after having checked if the housing is firmly closed and all screws are tightly
fastened.
•Only operate the device after having familiarized with its functions.
•Avoid flames and do not put close to flammable liquids or gases.
•Always keep the case closed while operating.
•Always allow a free air space of at least 50 cm around the unit for ventilation.
•Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power cord holding it by the plug. Never pull out the plug by tugging the power cord.
•Make sure that the device is not exposed to extreme heat, moisture or dust.
•Make sure that the available voltage is not higher than stated on the rear panel.
•Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.
•If the lens is obviously damaged, it has to be replaced.
•If device was dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
•If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
•If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
•For adult use only. Device must be installed beyond the reach of children. Never leave the unit
running unattended.
•Never attempt to bypass the thermostatic switch or fuses.
•For replacement use fuses of same type and rating only.

5
Ordercode: 33064
Performer Profile 650 Q5
•The user is responsible for correct positioning and operating of the Performer. The manufacturer will
not accept liability for damages caused by the misuse or incorrect installation of this device.
•This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
•Repairs, servicing and electric connection must be carried out by a qualified technician.
•WARRANTY: Till one year after date of purchase.
Operating Determinations
•This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
•The minimum distance between light output and the illuminated surface must be bigger than 1
meter.
•The maximum ambient temperature ta= 40°C must never be exceeded.
•The relative humidity must not exceed 50 % with an ambient temperature of 40° C.
•If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
•Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
•If the Performer is lowered from the ceiling or high joists, professional trussing systems have to be used.
•Use a clamp to mount the Performer, with the mounting bracket, to the trussing system.
•The Performer must never be fixed swinging freely in the room.
•The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
•When rigging, derigging or servicing the Performer, always make sure, that the area below the
installation site is secured and that there are not any unauthorized people around.
Improper installation can cause serious injuries and/or damage of property!

6
Ordercode: 33064
Performer Profile 650 Q5
Connection with the mains
Connect the device to the mains with the power-plug.
Always check if the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
PHASE
N
BLUE
BLACK
SILVER
NEUTRAL
YELLOW/GREEN
GREEN
GREEN
PROTECTIVE GROUND
Make sure that the device is always properly connected to the earth!
Improper installation can cause serious injuries and/or damage of property!

7
Ordercode: 33064
Performer Profile 650 Q5
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail [e-mail] and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the
customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
01) Your name
02) Your address
03) Your phone number
04) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to report and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
agreed otherwise in writing.
Complaints against us must be prepared in writing or sent by fax within 10 working days after receipt of
the invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement from which the obligation is resulting.

8
Ordercode: 33064
Performer Profile 650 Q5
Description of the device
Features
The Showtec Performer Profile 650 Q5 is a theater spotlight fixture with high output and great effects.
Light Source: 1 x 240W LED Array 5-in-1
Input Voltage: 100-240VAC, 50/60Hz
Power Consumption: 300W
Output: 60800 Lux@1m (26º lens)
Drive current: 1,5A
Refresh Rate: 1200Hz
Dimmer: 0-100%
Beam angle: 15º-50º, depending on applied lens
Dim Curve: Dimm4 technology, 4 presets
Strobe: 0-25Hz
Connections: 3- and 5-pin XLR signal connectors IN/OUT, Neutrik Powercon power connectors IN/OUT
Power Linking: 3 units @120V; 6 units @230V
DMX channels: 6, 8, 8, 11 or 17 channels
Housing: Die-cast aluminum
Cooling: Silent fan
Accessory slot for motorized pattern devices or optional iris
IP Rating: IP20
Fuse: T6,3AL/250V
Dimensions: 540 x 305 x 520 mm (LxWxH) (incl. bracket)
Weight: 8,2 kg
Optional accessories
33070 Zoom Lens Performer Profile, 15º - 30º
33071 Zoom Lens Performer Profile, 25º - 50º
33072 19º lens Performer Profile
33073 36º lens Performer Profile
33074 50º lens Performer Profile
33075 26º lens Performer Profile
33076 Iris for Performer Serie
33077 Gobo Holder for Performer serie (Soft Edge)
33078 Gobo Holder for Performer serie (Metal)
33079 Gobo Holder for Performer serie (Glass)
90527 Powercable Neutrik Powercon to Schuko (1,5m)
Overview
Fig. 01

9
Ordercode: 33064
Performer Profile 650 Q5
Fig. 02
01) Lens tube
02) Beam focus control
03) Barrel
04) Mounting bracket
05) LED lens
06) LED board
07) Thermal switch holder + thermal switch
08) Driver board
09) Insulated handle
10) PCB
11) Fuse T6,3AL/250V
12) PS socket
13) PS socket
14) PCB adapter
15) Cooling fan
16) Lens cover
17) Convex lens
18) Lens cover
19) Power supply

10
Ordercode: 33064
Performer Profile 650 Q5
Backside
Fig. 03
20) Fuse T6,3AL/250V
21) Powercon power connector 100-240V IN
22) Powercon power connector 100-240V OUT
23) 5-pin DMX signal connector IN
24) 5-pin DMX signal connector OUT
25) 3-pin DMX signal connector IN
26) 3-pin DMX signal connector OUT
27) LCD display + control buttons

11
Ordercode: 33064
Performer Profile 650 Q5
Installation
Remove all packing materials from the Performer Profile 650 Q5. Check if all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply.
Lens Locations
The different lenses used in the Performer are not interchangeable. When installing a new lens, refer to
the illustration below for proper placement.
Fig. 04
Focusing the beam
01) Loosen the beam focus controls located under the barrel (Fig. 05).
02) Slide the lens tube forwards or backwards to achieve the desired beam edge.
03) Once the fixture is focused, tighten the beam focus controls.
Fig. 05

12
Ordercode: 33064
Performer Profile 650 Q5
Color frame retaining clip
The color frame holder is equipped with a spring-loaded retaining clip. This prevents color frames and
accessories from falling out (Fig. 06).
Make sure that all color frame accessories are locked in position with the retaining clip
before hanging the Performer Profile 650 Q5.
01) Release the retaining clip by pushing it sideways while gently pulling backwards.
02) Insert the color frame(s).
03) Lock the retaining clip by pushing sideways while gently pushing forward.
Fig. 06
Color Notes
The performance of saturated colors is not guaranteed with low temperature ranges. For best results,
always use a high quality and temperature color medium. This product color extender may help increase
your gel life. Contact your dealer for ordering information.
Soft Focus,
Tube Retracted
Sharp Focus
Soft Focus
Tube Extended
19º
W
B
B
26º
W
B
B
36º
B
B
W
50º
W
B
B
W:
Worse gel life
B:
Better gel life
Shaping the beam
You may shape the beam with the shutters, a pattern, an optional drop-in iris, or by rotating the barrel.

13
Ordercode: 33064
Performer Profile 650 Q5
Shutters
The shutters are located inside the barrel. Move them back and forth to modify the shape of the beam.
Fig. 07
Drop-in Iris-Slot
The Drop-in Iris slot is located on the top of the barrel. It accommodates either a drop-in iris or a
motorized pattern device. When the slot is not in use, a small sheet metal cover secured with 2 screws
prevents light leakage (Fig. 08).
01) Use a screwdriver to loosen the screws on the drop-in iris slot cover. Do not remove the screws.
02) Slide the cover completely forward to expose the slot.
03) Insert the iris or motorized pattern device. For an iris, install the flat side towards the shutters and make
sure that the iris handle extends from the slot.
04) Slide the slot cover back towards the shutters, until it meets the iris handle. Leave enough space to
move the iris handle.
05) Secure the drop-in iris slot cover by tightening the screws.
Fig. 08

14
Ordercode: 33064
Performer Profile 650 Q5
Rotating the barrel assembly
01) Loosen the barrel rotation control. It can be found directly behind the shutters on the underside of
the reflector housing (Fig 09). Do not remove the barrel rotation control.
02) Rotate the barrel to the desired position.
03) Once the barrel is positioned, tighten the barrel’s rotation control to lock it into position.
Fig. 09
Installation with clamp
You can choose an appropriate clamp from your dealer to fix the fixture to a trussing system and allows
you to adjust the position of the fixture once it is mounted. (Fig. 10).
01) Tightly fasten the clamp to the mounting bracket with the provided pipe bolt and lock washer.
02) Place the clamp on the truss, then tighten the bolt to secure it.
03) Loosen the clamp pan screw and rotate the mounting bracket to the desired position.
04) Tighten the pan screw to lock the fixture into position.
Fig. 10

15
Ordercode: 33064
Performer Profile 650 Q5
Setting the angle
01) Loosen the adjustment screws (do not remove them).
02) Tilt the fixture to the desired position (Fig. 11).
03) Tighten the adjustment screws to secure the fixture in position.
Fig. 11
Control Modes
There are 4 modes:
•Static mode
•Preset colors
•Master/Slave
•DMX-512 (6CH, 8CH, 8CH, 11CH, 17CH)
One Performer (Static Mode)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) When the Performer is not connected with a DMX cable, it functions as a stand-alone device.
Please see page 21 for more information about the Static Mode.
One Performer (Preset colors)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) When the Performer is not connected with a DMX cable, it functions as a stand-alone device.
Please see page 22 for more information about the Preset color.

16
Ordercode: 33064
Performer Profile 650 Q5
Multiple Performers (Master/Slave control)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Use a 3-pin XLR cable to connect the Performer.
The pins:
01) Earth
02) Signal -
03) Signal +
04) Link the units as shown in fig. 12. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX-signal cable. Repeat this process to link the second, third, and fourth units.
You can use the same functions on the master device as described on pages 21 and 22 (Static
Mode, Preset color). This means that you can set your desired operation mode on the master
device and all slave devices will react the same as the master device.
Multiple Performers (Master/Slave control)
Fig. 12

17
Ordercode: 33064
Performer Profile 650 Q5
Multiple Performers (DMX Control)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Use a 3-pin XLR cable to connect the Performers and other devices.
04) Link the units as shown in fig. 13. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX-signal cable. Repeat this process to link the second, third, and fourth units.
05) Supply electric power: Plug electric mains power cords into each unit's Powercon socket, then plug
the other end of the mains power cord into proper electric power supply sockets, starting with the
first unit. Do not supply power before the whole system is set up and connected properly.
Multiple Performers DMX Set Up
Fig. 13
Note : Link all cables before connecting electric power

18
Ordercode: 33064
Performer Profile 650 Q5
Fixture Linking
You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to
run synchronized shows of two or more fixtures set to a master/slave operating mode. The combined
number of channels required by all the fixtures on a serial data link determines the number of fixtures the
data link can support.
Important:
Fixtures on a serial data link must be daisy-chained in a single line. To comply with the
EIA-485 standard, no more than 30 devices should be connected on one data link.
Connecting more than 30 fixtures on one serial data link without the use of a DMX optically
isolated splitter may result in deterioration of the digital DMX signal.
Maximum recommended DMX data link distance: 100 meters
Maximum recommended number of fixtures on a DMX data link: 30 fixtures
Maximum recommended number of fixtures on a Power link: 3 units @120V
Maximum recommended number of fixtures on a Power link: 6 units @230V
Data Cabling
To link fixtures together, you must obtain data cables. You can purchase DAP Audio certified DMX cables
directly from a dealer/distributor or construct your own cable. If you choose to create your own cable,
please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic
interference.
DAP Audio DMX Data Cables
•DAP Audio Basic microphone cable for allround use. bal. XLR/M 3-pin > XLR/F 3-pin.
Ordercode FL01150 (1,5 m), FL013 (3 m), FL016 (6 m), FL0110 (10 m), FL0115 (15 m), FL0120 (20 m).
•DAP Audio X-type data cable XLR/M 3-pin > XLR/F 3-pin. Ordercode FLX0175 (0,75 m),
FLX01150 (1,5 m), FLX013 (3 m), FLX016 (6 m), FLX0110 (10 m).
•DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL71150 (1,5 m), FL713 (3 m), FL716 (6 m), FL7110 (10 m).
•DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL7275 (0,75 m), FL72150 (1,5 m), FL723 (3 m), FL726 (6 m), FL7210 (10 m).
•DAP Audio 110 Ohm cable with digital signal transmission. Ordercode FL0975 (0,75 m),
FL09150 (1,5 m), FL093 (3 m), FL096 (6 m), FL0910 (10 m), FL0915 (15 m), FL0920 (20 m).
•DAP Audio DMX adapter: 3-pin/5-pin. Ordercode FLA30.
The Performer Profile 650 Q5 can be operated with a controller in control mode or without the controller
in stand-alone mode.

19
Ordercode: 33064
Performer Profile 650 Q5
Control Panel
A) LED Display
B) MENU button
C) ENTER button
D) UP button
E) DOWN button
Fig. 14
Control Mode
The fixtures are individually addressed on a data-link and connected to the controller.
The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it,
the controller will display the saved DMX address, next time.)
DMX Addressing
The control panel on the front side of the base allows you to assign DMX fixture addresses, which is the first
channel with which the Performer will respond to the controller.
Please note, when you use the controller, the unit has 17 channels.
When using multiple Performers, make sure you set the DMX addresses right.
Therefore, the DMX address of the first Performer should be 1(001); the DMX address of the second
Performer should be 1+17=18 (018); the DMX address of the third Performer should be 18+17=35 (035),
etc. Please, be sure that you do not have any overlapping channels in order to control each Performer
correctly. If two or more Performers are addressed similarly, they will work similarly.
Controlling:
After having addressed all Performer fixtures, you may now start operating these via your lighting
controller.
Note: After switching on, the Performer will automatically detect whether DMX 512 data is received or
not. If not, the problem may be:
•The XLR cable from the controller is not connected with the input of the Performer Profile 600.
•The controller is switched off or defective, the cable or connector is detective, or the signal wires are
swapped in the input connector.
Note: It is necessary to insert an XLR termination plug (with 120 Ohm) in the last fixture in order to ensure
proper transmission on the DMX data link.
Display Off after 50 seconds
When no button is pressed for 50 seconds, the display will turn off.
To light up the display, you have to press the MENU, UP, DOWN or ENTER button.
Once you have pressed the button, the display will light up.