Show Tec PowerBlinder 8 User manual

LED PowerBlinder 8
ORDERCODE 41324

Congratulations!
You have bought a great, innovative product from Showtec.
The Showtec LED PowerBlinder brings excitement to any venue. Whether you want simple plug-&-play
action or a sophisticated DMX show, this product provides the effect you need.
You can rely on Showtec, for more excellent lighting products.
We design and manufacture professional light equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied.
For more information: [e-mail]
You can get some of the best quality, best priced products on the market from Showtec.
So next time, turn to Showtec for more great lighting equipment.
Always get the best -- with Showtec !
Thank you!

1
2
3
4
5
5
6
6
6
7
7
7
8
9
9
11
12
13
14
15
15
15
16
Showtec
Showtec LED PowerBlinder™Product Guide
Warning.................................................................................…...……………..…………………………….………..…
Safety-instructions………………………………………………………………………………………………………..
Operating Determinations.…………………………………………………………………………………………….
Return Procedure……………………………………………………………………………......................................
Claims…………………………………………………………………………….........................................................
Description..…..............................................................................……….……………………………….…...............
Features…….……………………………………………………………………………………….……....…...............
Overview………………………………………………………………………………………………………................
Backside…………………………………………………...…...….……………….…………………...……………...….
Installation...............................................................................…...……………………………………..….................
Set Up and Operation.....................................................................……..…………………………….…..................
Stand-alone …….…………………………………………………….………………………….…….…………………
DMX Mode……………....…………..…………………………………………………………….……...………………
Mode 1 - 16 Channels..…………………………………………………………….……...……………………..
Mode 2 - 10 Channels..…………………………………………………………….……...……………………..
Mode 3 - 7 Channels..…………………………………………………………….……...……………………….
Mode 4 Built-in Programs..…………………………………………………………….……...…………………..
Mode 5 Sound-active..…………………………………………………………….……...……………………...
Maintenance.................................................................................………..………….…….……………....................
Changing the Fuse........................................................................…………………….………….………………..
Troubleshooting............................................................................………………….………………….…...................
Product Specifications.................................................................……………….…….…………………...................

2
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
SAFETY INSTRUCTIONS
Every person involved with the installation, operation and maintenance of this device has to:
-be qualified
-follow the instructions of this manual
Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-
observance of this manual or any unauthorized modification to the device.
Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!
Never remove warning or informative labels from the unit.
Never leave any cables lying around.
Never look directly into the light source.
Never use the device during thunderstorms, unplug the device immediately.
Do not insert objects into air vents.
Do not open the device and do not modify the device.
Do not connect this device to a dimmerpack.
Do not shake the device. Avoid brute force when installing or operating the device.
Do not switch the device on and off in short intervals, as this would reduce the system’s life.
Only use device indoor, avoid contact with water or other liquids.
Only operate the fixture after having checked that the housing is firmly closed and all screws are
tightly fastened.
Only operate the device after having familiarized with its functions.
Avoid flames and do not put close to flammable liquids or gases.
Always keep case closed while operating.
Always allow free air space of at least 50 cm around the unit for ventilation.
Always disconnect power from the mains, when device is not used or before cleaning! Only
handle the power-cord by the plug. Never pull out the plug by tugging the power-cord.
Make sure that the device is not exposed to extreme heat, moisture or dust.
CAUTION!
Keep this device away from rain and moisture!
CAUTION! Be careful with your operations.
With a dangerous voltage you can suffer
a dangerous electric shock when touching the wires!

3
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power-cord is never crimped or damaged. Check the device and the power-
cord from time to time.
Make sure that no side forces can impact on the truss system.
The cable insert or the female part in the device must never be strained. There must always be
sufficient cable to the device. Otherwise, the cable may be damaged which may lead to deadly
electrical shocks.
If the external cable is damaged, it has to be replaced by a qualified technician.
If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do
not switch it on immediately. The arising condensation water might damage your device. Leave
the device switched off until it has reached room temperature.
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
For adult use only. The device must be installed out of the reach of children. Never leave the unit
running unattended.
The user is responsible for correct positioning and operating of the LED PowerBlinder. The
manufacturer will not accept liability for damages caused by the misuse or incorrect installation
of this device.
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
For replacement use fuses of same type and rating only.
Repairs, servicing and electric connection must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.
OPERATING DETERMINATIONS
This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
The minimum distance between light-output and the illuminated surface must be more than 0,5 meters.
The maximum ambient temperature ta= 45°C must never be exceeded.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
If this device is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash
etc.
You endanger your own safety and the safety of others!
CAUTION ! EYEDAMAGES !.
Avoid looking directly into the light source.
(meant especially for epileptics) !

4
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all other safety
issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
If the LED PowerBlinder is lowered from the ceiling or high joists, professional trussing systems have
to be used.
Use a clamp to mount the LED PowerBlinder, with the mounting-bracket, to the trussing system.
The LED PowerBlinder must never be fixed swinging freely in the room.
The installation must always be secured with a safety attachment, e.g. an appropriate safety net
or safety-cable.
When rigging, derigging or servicing the LED PowerBlinder, always make sure, that the area below
the installation place is blocked and staying in the area is forbidden.
Improper installation can cause serious damage to people and property !
Connection with the mains
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
FASE
N
BLUE
BLACK
SILVER
NUL
YELLOW/GREEN
GREEN
GREEN
EARTH
Make sure that the device is always connected properly to the earth!

5
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail [e-mail] and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the
customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
1) Your name
2) Your address
3) Your phone number
4) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
otherwise agreed in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.

6
Description of the device
Features
The LED PowerBlinder is a LED system from Showtec.
• Ultra bright LED
• 96X 1W High Power LED's (32x Red, 32x green and 32x Blue)
• Reflected beam angle 25°
• LED Lifetime 100.000 hours
• Colour mixing system RGB
• Protocol DMX512, 16, 10 or 7 channels
•3 Stand alone modes, controlled by audio or manual speed
• DMX Connection XLR 3-pins
• Aluminium with black finish
• Internal microphone
• Including 100cm power cable including power plug
• Transmit cooling
• Unlimited colors
• Low power consumption
• No Ultra Violet
• Adjustable hanging brackets included
• Maximum ambient temperature +50 degrees
NOTE: Knowledge of DMX is required to fully utilize this unit.
Overview
Fig. 1

7
Backside
Fig. 2
1) LCD Display
2) Functions: Mode, Menu, Up, Down
3) 3-pin DMX signal connector (OUT)
4) 3-pin DMX signal connector (IN)
5) Microphone
6) Audio Sensitivity
7) ) IEC Connector
8) Fuse 2A
9) Earth
10) ON / OFF
When the display shows ,
the Powerblinder is in auto Mode.
When the display shows ,
the Powerblinder is sound-active.
Note: The position of the point shows which mode is active.
Before the r (Auto); after r (Audio)
Installation
Remove all packing materials from the LED PowerBlinder. Check that all foam and plastic padding is
removed. Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Note : Link all cables before connecting electric power.

8
FUNCTIONS:
There are 2 options for using the LED PowerBlinder: Stand-alone
DMX Mode
Stand-alone
In Stand-alone mode, you can use the menu button on the back of the device to scroll through the
options.
Strobe Programs
Open
Strobe 1-20 Hz
Strobe effect 1 (Rainbow + Slow Fade-in Strobe)
Strobe effect 2 (Rainbow + Mid-speed Fade-in Strobe)
Strobe effect 3 (Rainbow + Fast Fade-in Strobe)
Strobe effect 4 (Rainbow + Slow Fade-out Strobe)
Strobe effect 5 (Rainbow + Mid-speed Fade-out Strobe)
Strobe effect 6 (Rainbow + Fast Fade-out Strobe)
Strobe effect 7 (Slow random Strobe)
Strobe effect 8 (Mid-speed random Strobe)
Strobe effect 9 (Fast random Strobe)
No Strobe

9
DMX Mode
Spot Sections
The LED Powerblinder will automatically detect the presence of a DMX signal.
If a DMX signal is present, the DMX LED will blink.
In order to receive a DMX signal, the controller must be attached to a DMX controller by a 3-pin DMX
cable and the DMX controller must be turned on.
The LED PowerBlinder system can operate as a 16-, 10-, or 7-channel DMX fixture.
Channel 1 –Mode Options
With the first channel, you can set how many channels you want to use, by choosing your desired mode.
Example: When you want to use 16 channels, you select Mode 1.
Note: For the Strobe to function, you have to set the dimmer to open and you select which Spot section
you want to strobe.
Mode 1 - 16 Channels (Channel 1 must be set to 16-49)
Channel 2 –No Function
Channel 3 –Strobe
Channel 4 –Dimmer
0-15
Off
16-49
Mode 1 (16 DMX Channels)
50-99
Mode 2 (10 DMX Channels)
100-149
Mode 3 (7 DMX Channels)
150-199
Mode 4 (Built-in Programs Auto-run)
200-255
Mode 5 (Sound-active)
0-15
Open
16-141
Strobe 1-20 Hz
142-150
Strobe effect 1 (Rainbow + Slow Fade-in Strobe)
151-160
Strobe effect 2 (Rainbow + Mid-speed Fade-in Strobe)
161-170
Strobe effect 3 (Rainbow + Fast Fade-in Strobe)
171-180
Strobe effect 4 (Rainbow + Slow Fade-out Strobe)
181-190
Strobe effect 5 (Rainbow + Mid-speed Fade-out Strobe)
191-200
Strobe effect 6 (Rainbow + Fast Fade-out Strobe)
201-210
Strobe effect 7 (Slow random Strobe)
211-220
Strobe effect 8 (Mid-speed random Strobe)
221-230
Strobe effect 9 (Fast random Strobe)
231-255
No Strobe
0-255
Dimmer, from closed to open (0-100%)

10
Channel 5 –Red Dimmer Spot 1
Channel 6 –Green Dimmer Spot 1
Channel 7 –Blue Dimmer Spot 1
Channel 8 –Red Dimmer Spot 2
Channel 9 –Green Dimmer Spot 2
Channel 10 –Blue Dimmer Spot 2
Channel 11 –Red Dimmer Spot 3
Channel 12 –Red Dimmer Spot 3
Channel 13 –Red Dimmer Spot 3
Channel 14 –Red Dimmer Spot 4
Channel 15 –Green Dimmer Spot 4
Channel 16 –Blue Dimmer Spot 4
0-255
Dimmer, from closed to open (0-100%)
0-255
Dimmer, from closed to open (0-100%)
0-255
Dimmer, from closed to open (0-100%)
0-255
Dimmer, from closed to open (0-100%)
0-255
Dimmer, from closed to open (0-100%)
0-255
Dimmer, from closed to open (0-100%)
0-255
Dimmer, from closed to open (0-100%)
0-255
Dimmer, from closed to open (0-100%)
0-255
Dimmer, from closed to open (0-100%)
0-255
Dimmer, from closed to open (0-100%)
0-255
Dimmer, from closed to open (0-100%)
0-255
Dimmer, from closed to open (0-100%)

11
Mode 2 - 10 Channels (Channel 1 must be set to 50-99)
Channel 2 –No Function
Channel 3 –Strobe
Channel 4 –Dimmer
Channel 5 –Red Dimmer Spot 1 + 2
Channel 6 –Green Dimmer Spot 1 + 2
Channel 7 –Blue Dimmer Spot 1 + 2
Channel 8 –Red Dimmer Spot 3 + 4
Channel 9 –Green Dimmer Spot 3 + 4
Channel 10 –Blue Dimmer Spot 3 + 4
0-15
Open
16-141
Strobe 1-20 Hz
142-150
Strobe effect 1 (Rainbow + Slow Fade-in Strobe)
151-160
Strobe effect 2 (Rainbow + Mid-speed Fade-in Strobe)
161-170
Strobe effect 3 (Rainbow + Fast Fade-in Strobe)
171-180
Strobe effect 4 (Rainbow + Slow Fade-out Strobe)
181-190
Strobe effect 5 (Rainbow + Mid-speed Fade-out Strobe)
191-200
Strobe effect 6 (Rainbow + Fast Fade-out Strobe)
201-210
Strobe effect 7 (Slow random Strobe)
211-220
Strobe effect 8 (Mid-speed random Strobe)
221-230
Strobe effect 9 (Fast random Strobe)
231-255
No Strobe
0-255
Dimmer, from closed to open (0-100%)
0-255
Dimmer, from closed to open (0-100%)
0-255
Dimmer, from closed to open (0-100%)
0-255
Dimmer, from closed to open (0-100%)
0-255
Dimmer, from closed to open (0-100%)
0-255
Dimmer, from closed to open (0-100%)
0-255
Dimmer, from closed to open (0-100%)

12
Mode 3 - 7 Channels (Channel 1 must be set to 100-149)
Channel 2 –No Function
Channel 3 –Strobe
Channel 4 –Dimmer
Channel 5 –Red Dimmer Spot 1 - 4
Channel 6 –Green Dimmer Spot 1 - 4
Channel 7 –Blue Dimmer Spot 1 - 4
0-15
Open
16-141
Strobe 1-20 Hz
142-150
Strobe effect 1 (Rainbow + Slow Fade-in Strobe)
151-160
Strobe effect 2 (Rainbow + Mid-speed Fade-in Strobe)
161-170
Strobe effect 3 (Rainbow + Fast Fade-in Strobe)
171-180
Strobe effect 4 (Rainbow + Slow Fade-out Strobe)
181-190
Strobe effect 5 (Rainbow + Mid-speed Fade-out Strobe)
191-200
Strobe effect 6 (Rainbow + Fast Fade-out Strobe)
201-210
Strobe effect 7 (Slow random Strobe)
211-220
Strobe effect 8 (Mid-speed random Strobe)
221-230
Strobe effect 9 (Fast random Strobe)
231-255
No Strobe
0-255
Dimmer, from closed to open (0-100%)
0-255
Dimmer, from closed to open (0-100%)
0-255
Dimmer, from closed to open (0-100%)
0-255
Dimmer, from closed to open (0-100%)

13
Mode 4 Built-in Programs (Channel 1 must be set to 150-199)
Channel 2 –Colors
Channel 3 –Strobe
Channel 4 –Dimmer
Channel 5 –Fade time
Channel 6 –Chase Time
0-22
RGB rolling
23-45
RGBW flowing
46-68
WRGB flow recycle
69-91
WRGB chase
92-114
Each two spot-section has a WRGB chase
115-137
Red (all spots)
138-160
Green (all spots)
161-183
Blue (all spots)
184-206
Yellow (all spots)
207-229
Purple (all spots)
230-252
Cyan (all spots)
253-255
White (all spots)
0-15
Open
16-141
Strobe 1-20 Hz
142-150
Strobe effect 1 (Rainbow + Slow Fade-in Strobe)
151-160
Strobe effect 2 (Rainbow + Mid-speed Fade-in Strobe)
161-170
Strobe effect 3 (Rainbow + Fast Fade-in Strobe)
171-180
Strobe effect 4 (Rainbow + Slow Fade-out Strobe)
181-190
Strobe effect 5 (Rainbow + Mid-speed Fade-out Strobe)
191-200
Strobe effect 6 (Rainbow + Fast Fade-out Strobe)
201-210
Strobe effect 7 (Slow random Strobe)
211-220
Strobe effect 8 (Mid-speed random Strobe)
221-230
Strobe effect 9 (Fast random Strobe)
231-255
No Strobe
0-255
Dimmer, from closed to open (0-100%)
0-255
Fade Time, from slow to fast (0-100%)
0-255
Chase Time, from slow to fast (0-100%)

14
Mode 5 Sound-active (Channel 1 must be set to 200-255)
Channel 2 –Colors
Channel 3 –Strobe
Channel 4 –Dimmer
Channel 5 –Fade time
Channel 6 –Chase Time
0-22
RGB rolling
23-45
RGBW flowing
46-68
WRGB flow recycle
69-91
WRGB chase
92-114
Each two spot-section has a WRGB chase
115-137
Red (all spots)
138-160
Green (all spots)
161-183
Blue (all spots)
184-206
Yellow (all spots)
207-229
Purple (all spots)
230-252
Cyan (all spots)
253-255
White (all spots)
0-15
Open
16-141
Strobe 1-20 Hz
142-150
Strobe effect 1 (Rainbow + Slow Fade-in Strobe)
151-160
Strobe effect 2 (Rainbow + Mid-speed Fade-in Strobe)
161-170
Strobe effect 3 (Rainbow + Fast Fade-in Strobe)
171-180
Strobe effect 4 (Rainbow + Slow Fade-out Strobe)
181-190
Strobe effect 5 (Rainbow + Mid-speed Fade-out Strobe)
191-200
Strobe effect 6 (Rainbow + Fast Fade-out Strobe)
201-210
Strobe effect 7 (Slow random Strobe)
211-220
Strobe effect 8 (Mid-speed random Strobe)
221-230
Strobe effect 9 (Fast random Strobe)
231-255
No Strobe
0-255
Dimmer, from closed to open (0-100%)
0-255
Fade Time, from slow to fast (0-100%)
0-255
Chase Time, from slow to fast (0-100%)

15
Maintenance
The LED PowerBlinder requires almost no maintenance. However, you should keep the unit clean.
Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in
liquid.
Keep connections clean. Disconnect electric power, and then wipe the connections with a damp cloth.
Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Replacing a Fuse
Power surges, short-circuit or inappropriate electrical power supply may cause a fuse to burn out. If the
fuse burns out, the product will not function whatsoever. If this happens, follow the directions below to do
so.
1. Unplug the unit from electric power source.
2. Insert a screwdriver into the slot in the fuse cover. Turn the screwdriver to the left, at the same time
gently push a bit (Turn and Push). The fuse will come out.
3. Remove the broken fuse. If brown or unclear, it is burned out.
4. Insert the replacement fuse into the holder where the old fuse was. Reinsert the fuse cover.
Be sure to use a fuse of the same type and specification. See the product specification label for
details.
Troubleshooting
Showtec LED PowerBlinder
This troubleshooting guide is meant to help solve simple problems.
If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit
operates properly, do not carry out following steps.
If the light effect does not operate properly, refer servicing to a technician.
1. If the device does not operate properly, unplug the device.
2. Check the fuse, power from the wall, all cables etc.
3. If all of the above appears to be O.K., plug the unit in again.
4. If you are unable to determine the cause of the problem, do not open the LED PowerBlinder, as this
may damage the unit and the warranty will become void.
5. Return the device to your Showtec dealer.

16
Product Specification
Model: Showtec LED PowerBlinder
96pcs 1W Power LED's
Power Supply 230V Ac/50Hz
Power Input 0.33A at 230V
Fuse: 2A
96 LEDs (32 Red, 32 Green, 32 Blue)
Beam angle: 25°
LED Lifetime: 100.000 hours
Colour mixing system RGB
Protocol DMX512: 16CH, 10 CH or 7 Channels
3 Stand alone modes, controlled by audio or manual speed
DMX Connection XLR 3-pins
Aluminium with black finish
Internal microphone
Including 100cm power cable including power plug
Transmit cooling
Ambient temperature 0°C/40°C
Dimensions: 860 x 460 x 102 mm (LxWxH)
Weight 9.6 Kg
Design and product specifications are subject to change without prior notice.
Website: www.Showtec.info
Email: [e-mail]