Shure BLX288/B58 User manual

Quick Start Guide
1. a. Connect receiver to power source.
POWER
MIC OUT
INSTRUMENT OUT
18-12V
160mA
b. Connect receiver to mixer or amplifier. Hold power button to turn on.
audio ready group
(A-Y)
channel
(9-0)
power
BLX4
2. Press group button on receiver to perform a group scan.
3. Install batteries and turn on transmitter.
group
(A-Y)
channel
(9-0)
a.
b. On the transmitter, set the group and channel to match the receiver. The audio LED on the receiver should illuminate.
channel
group
group channel
channel
group
group
group channel
1/2©2017 Shure Incorporated
BLX
BLX Quickstart

If setting up additional systems, leave the first transmitter and receiver on. For each additional receiver, manually set the group to match the first receiver.
Note: The receiver will automatically perform a channel scan to find an available frequency after the group has been selected. Set the transmitter fre-
quency to match the receiver.
4. If sound is too faint or distorted, adjust the gain accordingly.
5 s
channel group
-10 dB
-10 dB
channel group
group
(A-Y)
channel
(0-9)
Shure IncorporatedBLX BLX Quickstart
2/2
Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Phone:[phone] Email:inf[email protected]