Siegenia DRIVE axxent DK Training manual

OPERATING AND SERVICE
INSTRUCTIONS
DRIVE
Concealed tilt sash locking drive.
DRIVE axxent DK
Window systems
Door systems
Comfort systems

07.2022 3/20H47.MOTS018EN-00
Operang and service instrucons DRIVE axxent DK
Inhalt
1 ABOUT THIS DOCUMENTATION....... 4
1.1 Target group.......................................... 4
1.2 Applicable documents .......................... 4
1.3 General notes ....................................... 4
1.4 Symbols used........................................ 4
2 SAFETY .............................................. 5
2.1 Intended use......................................... 5
2.2 Requirements for the target group....... 5
2.3 Safety notes .......................................... 6
3 COMMISSIONING ............................. 7
3.1 Performing a reference run
and teach-in run ................................... 7
4 OPERATION....................................... 8
 ................................................... 8
4.2 Window (Auto-lock).............................. 8
4.3 Performing a reference run
following a power failure...................... 9
4.4 Teaching in a new opening width ......... 9
 ...................................... 9
 
with SIEGENIA Comfort app) ................ 9
 ............................... 10
5 CLEANING AND MAINTENANCE..... 11
5.1 Cleaning .............................................. 11
5.2 Maintenance....................................... 11
6 TROUBLESHOOTING....................... 12
 .............. 12
6.2 General faults ..................................... 13
6.3 SIEGENIA Comfort app........................ 15
  ............ 15
7 TECHNICAL SPECIFICATIONS .......... 16
7.1 Data table ........................................... 16
7.2 Dimensions ......................................... 17
8 ACCESSORIES .................................. 17

07.20224/20 H47.MOTS018EN-00
DRIVE axxent DK Operang and service instrucons
1 About this documentaon
1.1 Target group

• The target group comprises all persons

– 
SIEGENIA products
– 
installed door elements that are
equipped with SIEGENIA products
1.2 Applicable documents

following applicable documents and
read them through completely.
TITAN operang and service instrucons

1.3 General notes
• 
a mirror image.
• All dimensions in millimetres (mm).
1.4 Symbols used


LED Explanaon




07.2022 5/20H47.MOTS018EN-00
Operang and service instrucons DRIVE axxent DK
2 Safety
2.1 Intended use
• DRIVE axxent DK

for the motorised locking and release of

possible to use the motor to move into

• The drive can be controlled via a wall


• DRIVE axxent DK is only to be used if it is


and/or its components.
• Use the DRIVE axxent DK only with
original accessories from SIEGENIA.
• DRIVEaxxentDK
checked and repaired by experienced
specialists only.
• DRIVE axxent DK is designed only for

• DRIVE axxent DK may not be used as a
drive for smoke and heat control systems
in windows.
• DRIVE axxent DK must not be used in

• DRIVE axxent DK must not be used in
windows that are intended as escape
routes.
• Only removable handles with a rose

• DRIVE axxent DK may not be used in

device (FBS).
• 
that is not in accordance with its



express consent of SIEGENIA has not

SIEGENIA accepts no liability whatsoever
for any material losses or injury to people
caused by failure to comply with this

2.2 Requirements for the target group
The following persons may only operate the
product if they have understood the dangers
involved in handling the product or if they

• children
• 

• persons with a lack of experience and
knowledge

07.20226/20 H47.MOTS018EN-00
DRIVE axxent DK Operang and service instrucons
2.3 Safety notes
• 
legs and feet can get trapped and/or
crushed in systems driven by an electric
motor.
• Make sure that no parts of the body
or objects are within the shearing and
locking area of the system.
• 






be somewhat larger than the opening
width of the drive. The safety stay must
be mounted before commencing the

• Electrically actuated windows and

way that they do not protrude into access
routes in buildings when either open or
closed. Ground-level access openings
must be secured against falling.
• 
glass used must be laminated safety glass
(VSG).
• 
stopped via the limit switch or overload

• Risk of injury or death due to electrical


• Should a solid object or any liquid enter

immediatelyanddisconnecttheDRIVEaxxentDK
from the electricity grid. Then have the
DRIVE axxent DK checked and repaired by


07.2022 7/20H47.MOTS018EN-00
Operang and service instrucons DRIVE axxent DK
3 Commissioning
3.1 Performing a reference run and
teach-in run
WARNING
Danger of crushing due to deacvated
safety stop
The moveable element does not react to

This means that the element can crush or
shear parts of the body.
• Stay within the range of vision of the
moving element.
• Maintain safety clearance from the
moving element.
• Keep people away from moveable
elements.
1. Close and lock window.
2. 
and hoots 20x.
3. 
1x
4. 
5. The drive unlocks the window

6. The drive opens the window

width.
7. 
the teach-in run in one of the following

– 
The drive hoots 1x
– 
extension of the stay or by manual
force.
The drive hoots 2x
– The maximum opening width of
150 mm is reached.
The drive hoots 3x
8. 
window again and locks it.
9. The opening width is stored.

07.20228/20 H47.MOTS018EN-00
DRIVE axxent DK Operang and service instrucons
4 Operaon
4.1 Buon
Acvaon (when buon is pressed = 1 s) LED Purpose Result
1x 
1x

up green


2x 
2x


green
Timer1)



drive closes and locks

1x 
1x

up red
Closes and locks the
window.
1x 
1x during the run
Stops the window during
the opening or closing
process
1x 1x 
and 
1x

up green
Releases the window in the

The window can be opened
manually as soon as an

1) when operang with the SIEGENIA Comfort app, it is possible to set the me individually.
4.2 Window (Auto-lock)
Operaon LED Purpose Result
Push the window
out of the turning


tone is heard.


The drive locks the window
independently.

07.2022 9/20H47.MOTS018EN-00
Operang and service instrucons DRIVE axxent DK
4.3 Performing a reference run
following a power failure
WARNING
Danger of crushing due to deacvated
safety stop
The moveable element does not react to

This means that the element can crush or
shear parts of the body.
• Stay within the range of vision of the
moving element.
• Maintain safety clearance from the
moving element.
• Keep people away from moveable
elements.
1. 
and hoots 20x.
2. 
1x
3. 
4.4 Teaching in a new opening width
1. 

(approx. 5 seconds).
3x short
1x long
2. Perform a reference run and teach-in run
7).
4.5 Safety funcon
• If the maximum permissible force of 150
N is exceeded when closing the window


• 




• 
remove them if required. Press "Close"

4.6 Whisper mode (only in connecon
with SIEGENIA Comfort app)
• If the whisper mode is operated in the


inching speed with 5 mm/s. The window
will not be locked.

07.202210/20 H47.MOTS018EN-00
DRIVE axxent DK Operang and service instrucons
4.7 Manual operaon

and locked.
1. Insert the handle into the rose. The
handle must be at approx. 45°.
2. Move the handle completely into the

3. Open window manually in turning

WARNING
Risk of injury from turning handle



• 
and close the rose.

07.2022 11/20H47.MOTS018EN-00
Operang and service instrucons DRIVE axxent DK
5 Cleaning and maintenance
WARNING
Electric shock or re due to exposed
electrical components

touch the electrical components. Flying

life-threatening injuries caused by electric

• 
• 


CAUTION
Risk of cuts from sharp edges
Sharp edges can lead to cuts.
• Wear safety gloves when carrying out
cleaning and maintenance work.
5.1 Cleaning
When cleaning the DRIVE axxent DK
do not allow any liquid to get inside
the unit.
• Never use any aggressive cleaning


damage the material surfaces.
• Never clean the unit with a high-pressure
cleaner or steam-jet cleaner.
• Clean the DRIVE axxent DK with a dry

• 


overhead or at certain heights.
5.2 Maintenance

DRIVE axxent DK and the hardware
components in¬ the window must be
performed at least once per year by a


• DRIVE axxent DK
• airgap
• 
existent)
• 
• ease of movement of the hardware

07.202212/20 H47.MOTS018EN-00
DRIVE axxent DK Operang and service instrucons
6 Troubleshoong
6.1 Adjustment and stabilisaon
Problem Soluon
The window sash is
pushed in a horizontal

Stabilise the window
sash using a restrictor
in accordance with the

The window sash is
pushed in a horizontal

Stabilise the window
sash using a restrictor
in accordance with the

The window sash is
elevated during locking
Stabilise the window
sash using a restrictor
in accordance with the


(handle horizontal).
Adjust the DRIVE axxent DK as shown.
2,5


Adjust the DRIVE axxent DK as shown.
2,5

07.2022 13/20H47.MOTS018EN-00
Operang and service instrucons DRIVE axxent DK
6.2 General faults



Problem Possible cause Soluon
DRIVE axxent DK
cannot be opened
manually

• Perform emergency release (see page 15)
• 
bolt

• check the airgap
• check milling dimensions if necessary

• Readjust the DRIVE axxent DK if
necessary (see page 12)

work / The window
does not move into the

The magnets are seated in the


• 
correct if necessary


• 
• DIP switch 2 OFF
ON
1 2 3 4
DRIVE axxent DK shows


radio remote control

 • 
No power supply • Check power supply



• Check wiring


• Measure the supply voltage

Input 230 V AC; 50/60 Hz; 170 mA
Output 24 V DC; 0.75 A; 18 W
DRIVE axxent DK beeps


permanently
Strong wind pressure • 
Draught • 
Power failure • 
reference run


• 


07.202214/20 H47.MOTS018EN-00
DRIVE axxent DK Operang and service instrucons
Problem Possible cause Soluon
DRIVE axxent DK beeps


3x to travel into the




Strong wind pressure • 
Draught • 
 • 

DRIVE axxent DK does


No power supply • Check power supply
Drive is soiled (sawdust etc.) • Check the drive for soiling and clean if
necessary


 • 
perform reference run if necessary (see
page 20)





• 

Hardware is too easy-running 
• Increasing the compression


(smart modules axxent

DRIVE axxent DK
does not respond to
smartphones/tablets

Router of the home network • restart WIFI router of the home network

Smartphone/tablet • restart smartphone/tablet

DRIVE axxent DK
• 
1. 
succession (within 2 seconds)
2. 
once (hold down for approx. 5 seconds)
3. DRIVE axxent DK moves back and forth
quickly before stopping
4. The module will then return to the




• Check wiring
A current measurement is performed on the drive whilst the window is closed in order to




07.2022 15/20H47.MOTS018EN-00
Operang and service instrucons DRIVE axxent DK
6.3 SIEGENIA Comfort app

link.si/td/mot001/0522
6.4 Manual emergency operaon
1. 
2. 

3. ④.
①
④
③


07.202216/20 H47.MOTS018EN-00
DRIVE axxent DK Operang and service instrucons
7 Technical specicaons
7.1 Data table
DRIVE axxent DK
 600 mA
 500 mA
 13 mA
 26 V DC
 24 V DC
 19 V DC


Switching voltage 24 V DC
 
 20% - 80% RH (non-condensing)
 IP20
Corrosion class (in accordance with DIN EN 1670) 3
Assembly type concealed in the frame
 Top
 Horizontal
 700 N 1)
 150 N 2)
 10 mm/s
 5 mm/s
 150 mm
Switching cycles (tested) 
Sash weight (max.) 130 kg
1) corresponds to approx. 8 Nm hand handle torque
2) reduced in accordance with EN 60335-2-103

07.2022 17/20H47.MOTS018EN-00
Operang and service instrucons DRIVE axxent DK
7.2 Dimensions
35
32,510
2,5
8
387
24
31736
20

8 Accessories
Name Material number
Smart modules axxent DK 2.1
(WIFI module for control via SIEGENIA Comfort app)
GZFM1300-000011
Radio module RCM 024-11-U GZFM1024-000010
Radio remote control RCR 11-2 GZFB0030-000010

www.siegenia.com
H47.MOTS018EN-00