Siemens Scalance xb-000 User manual

SIMATIC NET

Industrial Ethernet switches

SCALANCE XB-000

Operating Instructions

01/2022

A2B00077300-11

Introduction 1

Safety notices 2

Network topologies 3

Description of the device 4

Assembly and disassembly 5

Connecting up 6

Maintenance and

troubleshooting 7

Technical speci󹪝cations 8

Dimension drawings 9

Approvals 10

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage

to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices

referring only to property damage have no safety alert symbol. These notices shown below are graded according to

the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will be

used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property

damage.

Quali󹪝ed Personnel

The product/system described in this documentation may be operated only by personnel quali󹪝ed for the speci󹪝c

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Quali󹪝ed personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended or

approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance

are required to ensure that the products operate safely and without any problems. The permissible ambient

conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identi󹪝ed by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication may

be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software described.

Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this

publication is reviewed regularly and any necessary corrections are included in subsequent editions.

Siemens AG

Digital Industries

Postfach 48 48

90026 NÜRNBERG

GERMANY

A2B00077300-11

Ⓟ 01/2022 Subject to change

Table of contents

1 Introduction ........................................................................................................................................... 5

1.1 On the Operating Instructions .............................................................................................. 5

2 Safety notices ........................................................................................................................................ 9

3 Network topologies ............................................................................................................................. 11

4 Description of the device..................................................................................................................... 13

4.1 Purpose ............................................................................................................................. 13

4.2 Product overview ............................................................................................................... 14

4.3 Product properties and device views................................................................................... 17

4.3.1 SCALANCE XB004-1 ........................................................................................................... 17

4.3.2 SCALANCE XB004-2 ........................................................................................................... 18

4.3.3 SCALANCE XB004-1LD ....................................................................................................... 19

4.3.4 SCALANCE XB004-2LD ....................................................................................................... 20

4.3.5 SCALANCE XB005 .............................................................................................................. 21

4.3.6 SCALANCE XB008 ............................................................................................................. 22

4.3.7 SCALANCE XB004-1G......................................................................................................... 23

4.3.8 SCALANCE XB004-1LDG..................................................................................................... 24

4.3.9 SCALANCE XB005G............................................................................................................ 25

4.3.10 SCALANCE XB008G............................................................................................................ 26

4.4 TP ports (twisted pair)........................................................................................................ 26

4.4.1 Pin assignment .................................................................................................................. 27

4.4.2 Functions........................................................................................................................... 27

4.4.3 Insulation between the TP ports ......................................................................................... 28

4.5 FO port (󹪝ber optic) ........................................................................................................... 30

4.5.1 SCALANCE XB004-1 ........................................................................................................... 30

4.5.2 SCALANCE XB004-2 ........................................................................................................... 31

4.5.3 SCALANCE XB004-1LD ....................................................................................................... 32

4.5.4 SCALANCE XB004-2LD ....................................................................................................... 32

4.5.5 SCALANCE XB004-1G......................................................................................................... 33

4.5.6 SCALANCE XB004-1LDG..................................................................................................... 34

4.6 LEDs .................................................................................................................................. 35

5 Assembly and disassembly .................................................................................................................. 37

5.1 Safety notices for installation ............................................................................................. 37

5.2 Types of installation ........................................................................................................... 40

5.3 Fixing onto standard mounting rails ................................................................................... 41

5.4 Wall mounting................................................................................................................... 42

5.5 Disassembly....................................................................................................................... 44

SCALANCE XB-000

Operating Instructions, 01/2022, A2B00077300-11 3

6 Connecting up ..................................................................................................................................... 45

6.1 Safety when connecting up................................................................................................ 45

6.2 Wiring rules ....................................................................................................................... 48

6.3 Power supply ..................................................................................................................... 49

6.3.1 Power supply 24 VAC ......................................................................................................... 49

6.3.2 Power supply 24 VDC......................................................................................................... 50

6.4 Grounding ......................................................................................................................... 51

6.5 Twisted pair cable .............................................................................................................. 52

6.6 IE FC RJ-45 Plug 180........................................................................................................... 52

7 Maintenance and troubleshooting...................................................................................................... 55

8 Technical speci󹪝cations ....................................................................................................................... 57

8.1 SCALANCE XB004-1 ........................................................................................................... 57

8.2 SCALANCE XB004-2 ........................................................................................................... 59

8.3 SCALANCE XB004-1LD ....................................................................................................... 61

8.4 SCALANCE XB004-2LD ....................................................................................................... 64

8.5 SCALANCE XB005 .............................................................................................................. 66

8.6 SCALANCE XB008 .............................................................................................................. 68

8.7 SCALANCE XB004-1G......................................................................................................... 72

8.8 SCALANCE XB004-1LDG..................................................................................................... 76

8.9 SCALANCE XB005G............................................................................................................ 80

8.10 SCALANCE XB008G............................................................................................................ 84

8.11 Mechanical stability (in operation) XB-000 ......................................................................... 88

9 Dimension drawings............................................................................................................................ 89

10 Approvals............................................................................................................................................. 91

Index .................................................................................................................................................... 99

Table of contents

SCALANCE XB-000

4Operating Instructions, 01/2022, A2B00077300-11

Introduction 1

1.1 On the Operating Instructions

Purpose of the Operating Instructions

These Operating Instructions support you when commissioning networks with the Industrial

Ethernet switches of the SCALANCE XB-000 product line.

Validity of the Operating Instructions

These operating instructions are valid for the following devices:

Device Article number

XB004-1 6GK5 004-1BD00-1AB2

XB004-2 6GK5 004-2BD00-1AB2

XB004-1LD 6GK5 004-1BF00-1AB2

XB004-2LD 6GK5 004-2BF00-1AB2

XB005 6GK5 005-0BA00-1AB2

XB008 6GK5 008-0BA00-1AB2

6GK5 008-0BA10-1AB2

XB004-1G 6GK5 004-1GL00-1AB2

6GK5 004-1GL10-1AB2

XB004-1LDG 6GK5 004-1GM00-1AB2

6GK5 004-1GM10-1AB2

XB005G 6GK5 005-0GA00-1AB2

6GK5 005-0GA10-1AB2

XB008G 6GK5 008-0GA00-1AB2

6GK5 008-0GA10-1AB2

See also

SIMATIC NET Industrial TP and Fiber Optic Networks (https://support.automation.siemens.com/

WW/view/en/1172207)

https://siemens.com/scalance (https://siemens.com/scalance)

Further documentation

In the system manuals "Industrial Ethernet / PROFINET Industrial Ethernet" and "Industrial

Ethernet / PROFINET passive network components", you will 󹪝nd information on other SIMATIC

NET products that you can operate along with the devices of this product line in an Industrial

Ethernet network.

SCALANCE XB-000

Operating Instructions, 01/2022, A2B00077300-11 5

There, you will 󹪝nd among other things optical performance data of the communications

partner that you require for the installation.

You will 󹪝nd the system manuals here:

• On the data medium that ships with some products:

– Product CD / product DVD

– SIMATIC NET Manual Collection

• On the Internet pages of Siemens Industry Online Support:

– Industrial Ethernet / PROFINET Industrial Ethernet System Manual (https://

support.industry.siemens.com/cs/ww/en/view/27069465)

– Industrial Ethernet / PROFINET Passive Network Components System Manual (https://

support.industry.siemens.com/cs/ww/en/view/84922825)

SIMATIC NET manuals

You will 󹪝nd the SIMATIC NET manuals here:

• On the data medium that ships with some products:

– Product CD / product DVD

– SIMATIC NET Manual Collection

• On the Internet pages of Siemens Industry Online Support (https://

support.industry.siemens.com/cs/ww/en/ps/15247).

SIMATIC NET glossary

Explanations of many of the specialist terms used in this documentation can be found in the

SIMATIC NET glossary.

You will 󹪝nd the SIMATIC NET glossary here:

• SIMATIC NET Manual Collection or product DVD

The DVD ships with certain SIMATIC NET products.

• On the Internet under the following address:

50305045 (https://support.industry.siemens.com/cs/ww/en/view/50305045)

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is necessary

to implement – and continuously maintain – a holistic, state-of-the-art industrial security

concept. Siemens’ products and solutions constitute one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be connected to

an enterprise network or the internet if and to the extent such a connection is necessary and only

when appropriate security measures (e.g. 󹪝rewalls and/or network segmentation) are in place.

Introduction

1.1 On the Operating Instructions

SCALANCE XB-000

6Operating Instructions, 01/2022, A2B00077300-11

For additional information on industrial security measures that may be implemented, please visit

https://www.siemens.com/industrialsecurity (https://www.siemens.com/industrialsecurity)

Siemens’ products and solutions undergo continuous development to make them more secure.

Siemens strongly recommends that product updates are applied as soon as they are available

and that the latest product versions are used. Use of product versions that are no longer

supported, and failure to apply the latest updates may increase customers’ exposure to cyber

threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed

under

https://www.siemens.com/industrialsecurity (https://www.siemens.com/industrialsecurity)

Catalogs

You will 󹪝nd the article numbers for the Siemens products of relevance here in the following

catalogs:

• SIMATIC NET Industrial Communication / Industrial Identi󹪝cation, catalog IK PI

• SIMATIC Products for Totally Integrated Automation and Micro Automation, catalog ST 70

• Industry Mall - catalog and ordering system for automation and drive technology, Online

catalog (https://mall.industry.siemens.com/goos/WelcomePage.aspx?regionUrl=/

de&language=en)

You can request the catalogs and additional information from your Siemens representative.

Device defective

If a fault develops, send the device to your SIEMENS representative for repair. Repairs on-site are

not possible.

Recycling and disposal

The products are low in pollutants, can be recycled and meet the requirements of the WEEE

directive 2012/19/EU for the disposal of electrical and electronic equipment.

Do not dispose of the products at public disposal sites.

For environmentally friendly recycling and the disposal of your old device contact a certi󹪝ed

disposal company for electronic scrap or your Siemens contact (Product return (https://

support.industry.siemens.com/cs/ww/en/view/109479891)).

Note the di󹪜erent national regulations.

Trademarks

The following and possibly other names not identi󹪝ed by the registered trademark sign ® are

registered trademarks of Siemens AG:

SCALANCE, C-PLUG, OLM

Introduction

1.1 On the Operating Instructions

SCALANCE XB-000

Operating Instructions, 01/2022, A2B00077300-11 7

Electrostatic discharge

NOTICE

Electrostatic sensitive devices (ESD)

Electronic modules contain electrostatic sensitive components

These components can easily be destroyed if handled incorrectly.

Note the following instructions to avoid damage.

• Touch electronic modules only when you absolutely need to work on them.

• If electronic modules need to be touched, the body of the person involved must 󹪝rst be

electrostatically discharged and grounded.

• Do not bring electronic modules in contact with electrically isolating materials such as

plastic 󹪝lm, isolating table top pads or clothing made of synthetic 󹪝bers.

• Place the modules only on conductive surfaces.

• Pack, store and transport electronic modules and components only in conductive packaging

such as metalized plastic or metal containers, conductive foam or household aluminum foil.

Introduction

1.1 On the Operating Instructions

SCALANCE XB-000

8Operating Instructions, 01/2022, A2B00077300-11

Safety notices 2

Read the safety notices

Note the following safety notices. These relate to the entire working life of the device.

You should also read the safety notices relating to handling in the individual sections,

particularly in the sections "Installation" and "Connecting up".

CAUTION

To prevent injury and damage, read the manual before using the device.

Safety notices on use in hazardous areas

General safety notices relating to protection against explosion

WARNING

EXPLOSION HAZARD

Do not open the device when the supply voltage is turned on.

Safety instructions for use in hazardous locations according to UL/FM HazLoc

If you use the device under UL or FM HazLoc conditions, you must also adhere to the following

safety instructions in addition to the general safety instructions for protection against explosion:

This equipment is suitable for use in Class I, Division 2, Groups A, B, C and D or non-hazardous

locations only.

This equipment is suitable for use in Class I, Zone 2, Group IIC or non-hazardous locations only.

SCALANCE XB-000

Operating Instructions, 01/2022, A2B00077300-11 9

Safety notices

SCALANCE XB-000

10 Operating Instructions, 01/2022, A2B00077300-11

Network topologies 3

Switching technology allows extensive networks to be set up with numerous nodes and

simpli󹪝es network expansion.

Which topologies can be implemented?

Using the IE switches of the SCALANCE XB-000 product line, you can implement star topologies.

Note

Keep to the maximum permitted cable lengths of the devices you are using. You will 󹪝nd the

permitted cable lengths in the section "Technical speci󹪝cations (Page 57)".

Star topology

PLC

Field devices

Operator

control and

monitoring

Industrial Ethernet (Twisted Pair)

SCALANCE

XB005

Figure 3-1 Example of an electrical star topology with SCALANCE XB005

SCALANCE XB-000

Operating Instructions, 01/2022, A2B00077300-11 11

Laptop

PLC

Field devices

Operator

control and

monitoring

*B,.B;;B

Industrial Ethernet (Twisted Pair)

SCALANCE

XB004-1

SCALANCE

XB004-1

Industrial Ethernet (Fiber Optic)

Figure 3-2 Example of an electrical/optical star topology with SCALANCE XB004-1

Network topologies

SCALANCE XB-000

12 Operating Instructions, 01/2022, A2B00077300-11

Description of the device 4

4.1 Purpose

What is possible?

The IE switches of the SCALANCE XB-000 product line allow the cost-e󹪜ective installation of

Industrial Ethernet bus and star structures with switching functionality.

With the following IE switches, there are also electrical/optical media transitions:

• SCALANCE XB004‑1

• SCALANCE XB004‑2

• SCALANCE XB004‑1LD

• SCALANCE XB004‑2LD

• SCALANCE XB004‑1G

• SCALANCE XB004‑1LDG

Note

It is not possible to use IE switches of the SCALANCE XB-000 product line in a redundant ring

because they do not support redundancy.

Note

If devices are supplied over long 24 V power supply lines or networks, measures are necessary

to prevent interference by strong electromagnetic pulses on the supply lines. These can result,

for example, due to lightning or switching of large inductive loads.

One of the tests used to attest the immunity of these devices to electromagnetic interference is

the "surge immunity test" according to EN 61000-4-5. This test requires overvoltage protection

for the power supply lines. A suitable device is, for example, the Dehn Blitzductor BVT AVD 24 V

type no. 918 422 or a comparable protective element. An example of a suitable device for AC

operation is the Blitzductor BXT ML2 BD S 48, art. no. 920 245, in combination with the basic unit

BXT BAS, art. no. 920 300, or a comparable protective element.

Manufacturer:

DEHN+SÖHNE GmbH+Co.KG Hans Dehn Str.1 Postfach 1640 D-92306 Neumarkt, Germany

SCALANCE XB-000

Operating Instructions, 01/2022, A2B00077300-11 13

4.2 Product overview

Table 4-1 Overview of the product characteristics

XB004‑1 XB004‑2 XB004‑

1LD

XB004‑

2LD

XB005 XB008 XB004‑

XB004‑

1LDG

XB005G XB008G

SIMATIC envi‐

ronment

+ + + + + + + + + +

Diagnostics LED + + + + + + + + + +

24 VDC + + + + + + + + + +

24 VAC + 1) - + 1) - + 1) + 1) - - - -

2 x 24 VDC - - - - - - - - - -

Signaling con‐

tact + on-site op‐

eration

- - - - - - - - - -

Diagnostics:

Web, SNMP,

PROFINET

- - - - - - - - - -

C-PLUG - - - - - - - - - -

Ring redundan‐

cy with RM

- - - - - - - - - -

Passive ring re‐

dundancy

- - - - - - - - - -

Standby redun‐

dancy

- - - - - - - - - -

IRT capability - - - - - - - - - -

Fast learning - - - - - - - - - -

Passive listening - - - - - - - - - -

Log table - - - - - - - - - -

SNTP + SICLOCK - - - - - - - - - -

Cut Through - - - - - - - - - -

1) Note the hardware version (Page 57) or the article number.

Table 4-2 Overview of the connection options

XB004-1 XB004‑2 XB004-

1LD

XB004-

2LD

XB005 XB008 XB004-

XB004-

1LDG

XB005G XB008G

TP (RJ-45)

Fast Ethernet

10 / 100 Mbps

4 4 4 4 5 8 - - - -

Fiber multi‐

mode (SC)

Fast Ethernet

100 Mbps

1 2 0 0 - - - - - -

Single-mode 󹪝‐

ber (SC)

Fast Ethernet

100 Mbps

0 0 1 2 - - - - - -

Description of the device

4.2 Product overview

SCALANCE XB-000

14 Operating Instructions, 01/2022, A2B00077300-11

XB004-1 XB004‑2 XB004-

1LD

XB004-

2LD

XB005 XB008 XB004-

XB004-

1LDG

XB005G XB008G

TP (RJ-45)

Gigabit Ether‐

net 10 / 100 /

1000 Mbps

- - - - - - 4 4 5 8

Fiber multi‐

mode (SC)

Gigabit Ether‐

net 1000 Mbps

- - - - - - 1 0 - -

Fiber single

mode (SC)

Gigabit Ether‐

net 1000 Mbps

- - - - - - 0 1 - -

Unpacking and checking

WARNING

Do not use any parts that show evidence of damage

If you use damaged parts, there is no guarantee that the device will function according to the

speci󹪝cation.

If you use damaged parts, this can lead to the following problems:

• Injury to persons

• Loss of the approvals

• Violation of the EMC regulations

• Damage to the device and other components

Use only undamaged parts.

1. Make sure that the package is complete.

2. Check all the parts for transport damage.

Components of the product

The following components are supplied with a SCALANCE XB-000:

• IE switch SCALANCE XB-000

• 3-pin terminal block (power supply)

• Product information

Description of the device

4.2 Product overview

SCALANCE XB-000

Operating Instructions, 01/2022, A2B00077300-11 15

Accessories

Component Length Packaging

unit

Order number Suitable for

XB‑000

Fast Ethernet

Suitable for

XB‑000G

Gigabit Ether‐

net

IE TP Cord RJ-45/RJ-45, CAT 6, TP ca‐

ble 4x2, 󹪝tted with 2 RJ-45 plugs

0.5 m 1 6XV1870-3QE50 + +

IE TP Cord RJ-45/RJ-45, CAT 6, TP ca‐

ble 4x2, 󹪝tted with 2 RJ-45 plugs

1 m 1 6XV1870-3QH10 + +

IE TP Cord RJ-45/RJ-45, CAT 6, TP ca‐

ble 4x2, 󹪝tted with 2 RJ-45 plugs

2 m 1 6XV1870-3QH20 + +

IE TP Cord RJ-45/RJ-45, CAT 6, TP ca‐

ble 4x2, 󹪝tted with 2 RJ-45 plugs

6 m 1 6XV1870-3QH60 + +

IE TP Cord RJ-45/RJ-45, CAT 6, TP ca‐

ble 4x2, 󹪝tted with 2 RJ-45 plugs

10 m 1 6XV1870-3QN10 + +

IE FC Stripping Tool - 1 6GK1901‑1GA00 + +

IE FC blade cassettes (5 mm) - 1 6GK1901‑1GB01 + +

IE FC TP standard cable GP 2x2 - 1 6XV1840‑2AH10 + -

IE FC TP standard cable GP 4x2 - 1 6XV1878‑2A (+) +

IE FC TP trailing cable - 1 6XV1840‑3AH10 + -

IE FC TP marine cable - 1 6XV1840‑4AH10 + -

IE FC TP trailing cable GP - 1 6XV1870‑2D + -

IE FC TP 󹪞exible cable GP 2x2 - 1 6XV1870‑2B + -

IE FC TP 󹪞exible cable GP 4x2 - 1 6XV1878‑2B (+) +

IE FC TP FRNC cable GP - 1 6XV1871-2F + -

IE FC TP festoon cable GP - 1 6XV1871-2S + -

IE FC TP food cable - 1 6XV1871-2L + -

IE TP torsion cable - 1 6XV1870-2F + -

FO standard cable 50/125, 󹪝tted