Siemens OpenStage 10 T User manual

Communication for the open minded
Siemens Enterprise Communications
www.siemens-enterprise.com
Documentation
HiPath 500, HiPath 3000, HiPath 5000
HiPath 4000
OpenStage 10 T
Quickstart Guide
oi.book Seite 1 Mittwoch, 10. August 2011 4:08 16

Operation of your phone Calling functions
2
Operation of your phone
Function and audio keys
Calling functions
Using codes
All communication system functions can be activated via codes.
Using function keys
Your service personnel can program the three function keys with frequently used func-
tions. You can activate a function by simply pressing the relevant key (if permitted by the
current situation).
Codes that activate functions are always preceded by the star key, whereas codes
that deactivate/delete functions always start with the pound key.
nActivate/deactivate the loudspeaker
+Set situation-specific volumes e.g. for ringtones
or loudspeaker
Label strips and transparent cover
SFunction keys
oi.book Seite 2 Mittwoch, 10. August 2011 4:08 16

HiPath 4000 Important operating procedures
3
Important operating procedures
HiPath 4000
In idle mode
Answering a call
Z^
Rejecting a call
ZS"Release"
Picking up call
^T "Pickup"
Redialing a number
^S"Last # Dial"
Programming external phone numbers on speed-dial keys
S"Store" ^jCode for "Store speed-dial" jSpeed-dial key jExternal
code + phone number R "Store"
Programming call forwarding
^j Code for call forwarding jDestination phone number #\
Deactivating call forwarding
R"Call Forward"
^Lift the handset jEnter number or code
\Replace the handset [Conduct call
SPress the function key (if configured; ask your service personnel)
ZRingtone/call waiting tone Next operating step
oi.book Seite 3 Mittwoch, 10. August 2011 4:08 16

Important operating procedures HiPath 4000
4
During a call with a station (A)
Switching to "open listening"
n
Consultation
S"Transfer" jPhone number of station B [Station B T"Transfer"
[Station A
Accepting call waiting
ZCall waiting T"Push-Pull" [Station B S"Push-Pull" [Station A
Start conference
S"Transfer" jPhone number of station B [Station B SConference
[Stations A+B
Transferring a call with station B without consultation
S"Transfer" jPhone number of station B \
Transferring a call after consultation
S"Transfer" jPhone number of station B [Station B \
oi.book Seite 4 Mittwoch, 10. August 2011 4:08 16

HiPath 500, HiPath 3000, HiPath 5000 Important operating procedures
5
HiPath 500, HiPath 3000, HiPath 5000
In idle mode
Answering a call
Z^
Rejecting a call
ZS"Release"
Targeted call pickup
^)59 jNumber of ringing phone
Redialing a number
^S"Redial"
Programming external phone numbers on speed-dial keys
)92 )jSpeed-dial key jExternal code + phone number
Programming call forwarding
S"Call forwarding" 1/ 2/ 3Select forwarding type jDestination
phone number
Deactivating call forwarding
R"Call forwarding"
oi.book Seite 5 Mittwoch, 10. August 2011 4:08 16

Important operating procedures HiPath 500, HiPath 3000, HiPath 5000
6
During a call with a station (A)
Switching to "open listening"
n
Consultation
S"Consult" jPhone number of station B [Station B T"Consult"
[Station A
Start conference
S"Consult" jPhone number of station B [Station B T"Consult"
)3 [Stations A+B
Transferring a call with station B without consultation
S"Consult" jPhone number of station B \
Transferring a call after consultation
S"Consult" jPhone number of station B [Station B \
oi.book Seite 6 Mittwoch, 10. August 2011 4:08 16

Copyright © Siemens Enterprise
Communications GmbH & Co. KG
Hofmannstr. 51
80200 München
Deutschland
Siemens Enterprise
Communications GmbH & Co. KG
is a Trademark Licensee of Siemens AG
Reference No:
A31003-S2000-U124-3-7619
The information provided in this document
contains merely general descriptions or char-
acteristics of performance which in case of
actual use do not always apply as described
or which may change as a result of further
development of the products.
An obligation to provide the respective char-
acteristics shall only exist if expressly agreed
in the terms of contract. Availability and
technical specifications are subject to
change without notice. OpenScape,
OpenStage and HiPath are registered trade-
marks of Siemens Enterprise
Communications GmbH & Co. KG.
All other company, brand, product and ser-
vice names are trademarks or registered
trademarks of their respective holders.
Siemens Enterprise Communications
www.siemens-enterprise.com
Communication for the open minded
oi.book Seite 7 Mittwoch, 10. August 2011 4:08 16