Siemens OpenStage 15 T User manual

Siemens Enterprise Communications
www.siemens-enterprise.com
Documentation
HiPath 1100
System Telephones
OpenStage 15 T
OpenStage 30 T
optiPoint 500 economy
optiPoint 500 basic
optiPoint 500 standard
optiPoint 500 advance
Quick Reference Guide

2
Explanation of symbols
Numbering Plan
The key symbols show the optiPoint telephone user interface.
The functions on OpenStage and optiPoint telephones are comparable.
Symbol Explanation
ll, q, p... Enter numbers, keys, password, internal or
external numbers, etc.
wSignaling with a short beep
n/tLift/Replace the handset
sStart conversation
or NService Menu
Programmable key is ON
Programmable key deleted
Blinking Programmable key
<>and :Navigation keys
-+Setting keys
or nSpeaker on/off
OMailbox key (OpenStage only)
Description HiPath 1120 HiPath 1150 HiPath 1190
External line 801 to 808 801 to 832 801 to 845
Extension, including S011 t o 30 11 to 60
610 to 645
101 to 240
Group of external lines 0, 890 to 899
Internal subscriber group 770 to 779
Hunt Groups (HG) 780 to 789
UCD subscriber group 790 to 799
Carrier 9
EVM - Default internal number 790
EVM - Message Ports 7491 to 7492
EVM - Virtual ports 744 to 747
Fax/DID - Virtual message ports 740 to 743
USB/CAPI line 10 100
Substitution for * and # 75 and 76 (accordingly)
Service Menu
Speaker

3
Display indications
• Line 1 displays time, date, requests, error messages and confirmation messag-
es, as appropriate.
• Line 2 displays the internal number, system name, and available options that
can be selected by pressing =. If the ">" appears on the right, it means there
are more options available. Options can be accessed using <and :
(optiPoint 500: :, <and >).
Configuring the keys
The key layout is shown below. The remaining keys are available for programming.
Feature
Features can be selected as follows:
1. Using the navigation keys in the Main Menu
2. Using the Service Menu key then browsing the feature option list
3. Using the Service Menu key and the appropriate feature code
4. Using a Programmable key
5. Using the feature code
System telephone functions
The Mute key will function as Internal when Automatic seizure of an ex-
ternal line is activated. In all other cases, the Mute key functions as Mute.
See the User Manual (A31003-K1160-B801-*) or the HiPath 1100 Manager
for information on how to program keys. Labels for programmable keys can
be printed/changed using the "Printing Labels" service on the HiPath 1100
Manager.
System telephone settings can be configured individually according to each
user’s preferences. For further information on how to configure a system
telephone, see the manual included with the unit.
Accessing a mailbox key programmed for
MWI
Call charge consultation qji
Call forwarding p
Call forwarding
Deactivation
Parking
dto mslot
2
1
08:30 MON 20.APR 09
27 HiPath 1100 >
O
pen
S
tage
30 T
opt
iP
o
i
nt 5
00
a
d
vance
Service
Redial
Mute
Speaker
End
Release
Mailbox
Call forwarding
Call forwarding
Parking

4
Seizure of an external line
Functions used when making calls
Parking
Resuming a call
dto mslot
Caller List rlf <>list :
Programming a feature for a
key qme <>
feature to be programmed and :
Redial
Speaker Activate/deactivate speakerphone
Activate/deactivate speaker
s
Headset Activate/deactivate headset
Checking relay status qmheh
Admin of extension names
(1 optiPoint or OpenStage
with system display)
qmhxmi pPIN extension
System Speed Dial or extension/group
Feature Code
External call dp
External call using a group of
external lines lmd.lmm p external line
Seizure of a specific external
line lde.lhi p
Internet Access
Activation qhmg p external line
Internet Access
Deactivation rhmg p external line
External line reservation
Busy
1)Wait for wtPhone rings npexternal
s
or
2)Wait
qil
tPhone rings npexternal s
Feature Code
Parking
Select a key
Redialing
Speaker
Speaker
Activate headset
Service Menu

5
System speed dialing qk + ddd . fhm
Individual speed dialing qk + qd.qh s
Individual speed dialing
Programming qmf +qd.qh
:pnumber
:wait w
Speakerphone auto-
answering mode
Activation
qmjwait for w
Speakerphone auto-
answering mode
Deactivation
rmj wait w
Direct communication call qld pextension with a system telephone
wait for wsrecord message
Internal call pextension
Calling a call group (CG) kkd . kkmV
Calling a Hunt Group (HG) kld . klm
UCD subscriber group kmd . kmm
Urgent call
(busy extension)
1) np(busy) Wait for ws
or
2 np(extension)
qil s
Hotline
(If programmed) ns
Warmline
(If programmed) nWait s
Override
Busy extension p(busy)
qjf s
LCR Bypass qhi p Carrier + number s
View timeout rji
Silent monitoring
busy extension qmhh p busy extension s
Recall
Activation
(Extension does not answer or
is busy)
1)pno answer :or
qil w.
Wait. Phone rings ns
or
2) Wait for wt.
Wait. Phone rings ns
CHANGE?
SAVE?
Service Menu
Service menu
RECALL?

6
Functions used during calls
Functions used when receiving calls
Callback
Deactivation ril
Carrier m
Using a temporary MSN to
make a call qhe p MSN slot or MSN number
pexternal line pexternal number
Feature Code
Account code qjd p account code rp
number
Conference spnumber
sqg s
Consultation
(To end a consultation, wait for
the call to be disconnected)
sps
Parking sqij+d.
m
Retrieving a parked
call rij + d.m s
General Parking st
Retrieving a parked external
call qjg + pline s
To g g l e
(Use after consultation, for an-
swering a second or urgent
call)
sqf s
Suffix dialing s+ pdata
Retrieving a call on hold qd
if busy or no answer
Transfer
(When an external analog line
programmed as “Type of an-
swering signal” or a digital line
is being used, you must wait
for an answer before transfer-
ring the call. For transfers
without consultation, there is
no need to wait before an-
swering)
Internal
spextension t
External
s<>:
pnumber (s)
Feature Code
Accessing a mailbox pVoice mail group
Consultation
Service menu
Consultation
Service menu
Gen. Parking
Service menu
Service menu
TRANSFER?

7
Miscellaneous functions
Answering Call
waiting qii
or
sqf s
or
:
Group pickup qik
or
:
Individual pickup qim p extension
Call forwarding on an analog line:
Call forwarding to external
number qee p external :
Internal call forwarding qee p extension, voice mail group, call
group
or Fax/DID :
Call forwarding
Deactivation ree
Call forward no answer or
busy
Activation
qeh p extension,voice mail group ,
Call
group or external line
Call forward no answer or
busy
Deactivation
reh
Do not disturb
Activation qmk
Do not disturb
Deactivation rmk
EVM:
Consultation at the extension
being used kmd VM group ppassword
Consultation from another ex-
tension kmd VM group ppassword pexten-
sion s
Consultation from an external
extension spyour external number + qppass- word pextension
Feature Code
Entrance telephone
Door opener qje
or
qje p exten-
sion
General alarm
Deactivation rmheh p password
Service menu
Service menu
CALL WTNG?
CALL 4 PCKP GRP?
Service menu
Service menu

8
Electronic lock password
change qmhg p current password pnew password
pconfirm new password w
Electronic lock
Activation qjj p password
Electronic lock
Deactivation rjj p password
Busy signal when extension
is busy
Activation
qmhee :
Busy signal when extension
is busy
Deactivation
rmhee
System programming mode
Activation qmi p password pcodes
Deactivating features
(call forwarding, do not dis-
turb, data protection, alarm
clock, callback and speaker-
phone auto-answering)
rd
Language/Country settings qmhef p country code
Call Group (CG) and Hunt
Group (HG) Login qli p group (if it belongs to more than
one group)
Call Group (CG) and Hunt
Group (HG) Logout rli p group (if it belongs to more than
one group)
Room monitor
(Babyphone) qll
Music on Hold
Activation qmhed Music
Music on Hold
Deactivation rmhed
Remote configuration
HiPath 1100 Manager qmmf
Remote configuration
Using an MF telephone
1) The local programming extension is talking to
the remote programmer:
qmme wt
Remote programmer must provide:
ppassword pprogramming codes.
2) The remote programmer dials the system and
is attended by the Fax/DID feature:
qmi p password pprogramming
codes.
Data protection
Activation qhmd
Data protection
Deactivation rhmd

9
Alarm clock
UCD subscriber group functions
Relay
Activation (only for HiPath 1120) qmd
Relay
Activation (only for HiPath 1120) rmd
Night service
Activation qhh p password
Night service
Deactivation rhh p password
Call Waiting tone
Activation nrlk wt
Call waiting tone
Deactivation nqlk wt
COS (Class of service)
Changeover qidl p extension ppassword s
Feature Code
Alarm clock
(Daily) qhje p time (e.g 1230) :
Alarm clock
(Daily, except weekends) qhjf p time (e.g 1230) :
Alarm clock
(After a specified time period) qhjg p time (e.g 1230) :
Alarm clock
(For a specified date and time) qhjh p date/time (e.g 24121830) :
Alarm clock
Deactivation rhj :
Feature Code
Agent available qhdf
Agent unavailable rhdf
Calling a UCD subscriber
group kmd.kmm
Logging into a UCD subscriber
group qhde p group (if the extension be-
longs to more than one group)
Logging out of a UCD sub-
scriber group rhde
UCD agent in service qhdg
UCD agent out of service rhdg
Show queue size to UCD
agent qhdi

10
Satellite PABX
Special functions for ISDN lines
Feature Code
Flash on external analog line qie
Operation as a Satellite PABX lmd.lmm p line number
Feature Code
Immediate call forwarding
for MSN
Activation
qjhe pexternal wpMSN
Immediate call forwarding
for MSN
Deactivation
rjhe w
Call forwarding - no answer,
for MSN
Activation
qjhf pexternal wpMSN
Call forwarding - no answer,
for MSN
Deactivation
rjhf w
Call forwarding for MSN when
the line is busy
Activation
qjhg pexternal wpMSN
Call forwarding - Busy, for
MSN
Deactivation
rjhg w
Caller ID
(Trace) qlh
Restriction for sending MSN
Activation qlj
Restriction for sending MSN
Deactivation rlj
Using features provided by
a carrier over an ISDN Network qidg p external pISDN code
Note 1:
For Korea the numbering plan changes as follows:
a) Access to the group of external lines is done with digit "9" instead of "0"
b) Calling an operator terminal is done with digit "0" instead of "9"
c) Group call pickup is done with sequence "*0" instead of "*57"
d) Recovery of a parked call is done with sequence "*57" instead of "*0"
Note 2:
Feature Codes can be changed with the HiPath 1100 Manager. An expert
should be consulted in this case.
Service menu
Service menu