Siemens Gigaset 3000 Micro User manual

Giga 3000 Micro, IM1-engl, A31008-G3000-B022-1-6Z19 3000cou.fm 31.03.00

8
Operating Instructions
ENGLISH
and Safety Precautions
*LJDVHW
3000
0LFUR

2
Giga 3000 Micro, IM1-engl, A31008-G3000-B022-1-6Z19 3000cou.fm 31.03.00
Brief overview
Idle display, display keys
The display is protected by a film.
Please remove protective film.
8
2QcU !
M, +[
Base name
–Constant: ready
for dialling/to
receive
–Flashing: no
base station
contact
Recall key
– For systems &
select carrier
services*
–Pause:
hold key down
End call
– End call
– Cancel
function
–Handset
on/off:
hold key down
Open menu
Charging status
7
full

empty
Display keys
see below
Keypad lock
– On/off
hold key down
Ta l k
– Accept
call
– Dial call
number
Open Directory
Ringer on/off:
hold key down!
8
2QcU !
M, +[
Display keys
– Functions vary depending on the dis-
play
– If there are 2 functions, press either the
left or right side of the key
Reception range
Current functions
of the display keys, e.g. network access
list, caller list*, calling internal number,
redialling number
*Dependent on the base station, country and carrier services
8

3
Giga 3000 Micro, IM1-engl, A31008-G3000-B022-1-6Z19 3000cou.fm 31.03.00
Important menus

Main menu
6HWWLQJVÖÖÖÖÖÖÖÖ
Ö2.Ö
%DVH VHWWLQJV
%DVH 8VHU 2SWLRQ
+VHW 8VHU 2SWLRQ
5RRP 0RQLWRU 6HW
6HUYLFH 6HW 8S
Settings
6RXQG6HWWLQJVÖÖ
Ö2.Ö
6HFXULW\
$XWR 7DON
/DQJXDJH
'HIDXOW 5HVHW
Audio
5LQJHU9ROXPHÖÖÖ
5LQJHU 0HORG\
%HHS
+DQGVHW 9ROXPH
.H\ %HHSV
%DWW /RZ %HHS
&RQILUP %HHSV

Activate the
main menu
;<
Scroll through
menus, directory
Ö2.Ö
Confirm function/
input
9
Activate supple-
mentary menu
\
/
B
Cancel/end func-
tions
-
Directory
$QQH
%DUEDUDÖÖÖÖÖÖÖÖÖ
9
&ROLQ

Supplementary menu
'LVSOD\1XPEHUÖÖ
'LDO 1XPEHU
1HZ (QWU\
(GLW (QWU\
'HOHWH (QWU\
'LVSOD\ (QWU\
&RS\ (QWU\
'HOHWH /LVW
&RS\ /LVW
$YDLODEOH 0HPRU\
[
Redialling number

ÖÖÖÖÖÖÖÖÖ
9


Supplementary menu
'LVSOD\1XPEHUÖÖ
'LDO 1XPEHU
&RS\ WR 'LU
(GLW (QWU\
'HOHWH (QWU\
'LVSOD\ (QWU\
8

4
Giga 3000 Micro, IM1-engl, A31008-G3000-B022-1-6Z19 3000cou.fm 31.03.00
Safety precautions
• Never use ordinary (non-rechargeable) batteries. Only use
the V30145-K1310-X143 battery supplied (rechargea-
ble), otherwise the battery casings may be destroyed
(dangerous).
• The following symbol is displayed in the battery compart-
ment:
hUse battery type in accordance with
these operating instructions.
•Only use the plug-in power supply unit supplied as in-
dicated on the underside of the charging unit.
• Do not use third-party charging units as these can dam-
age the battery.
• The battery warms up during charging; this is normal and
not dangerous.
• The operation of medical equipment can be affected by
the handset.
• The handset can cause an unpleasant humming noise in
hearing aids.
• Do not operate the handset in environments where there
is risk of explosion, such as paint shops.
• Please remember to include the operating instructions
when passing your handset on to a third party.
• Please dispose of the battery in an environmentally friend-
ly manner in accordance with the relevant legislation.
Display symbols
The following symbols appear in display, depending on the
operating situation:
M
Network access list
;<
On/off

Left/right
,
Mailbox function:
e.g. new entry
in the caller list
:
Delete character
,17
Internal dialling
[
Redialling number
Ö2.
Confirmation
*2%$&.
End function
\
Cancel/higher
menu level
9
Supplementary
menu
8

5
Giga 3000 Micro, IM1-engl, A31008-G3000-B022-1-6Z19 3000CoIVZ.fm 31.03.00
Contents
Brief overview ................................................................... 2
Idle display, display keys.........................................................2
Important menus .............................................................. 3
Safety precautions............................................................ 4
Display symbols ................................................................ 4
Preparing the handset...................................................... 6
Inserting the battery................................................................6
Connecting the charging unit ..................................................7
Wall-mounting the charging unit .............................................7
Charging the battery ...............................................................8
Fitting the attachment clip ......................................................8
Activating/deactivating the handset ........................................9
Activating/deactivating the keypad lock ..................................9
Registering the handset................................................. 10
Making calls .................................................................... 11
Making external calls ............................................................11
Direct internal dialling............................................................11
Answering a call....................................................................11
Transferring an external call, making an enquiry call.............12
Redial ............................................................................... 13
Directories ....................................................................... 14
Storing a call number ............................................................14
Dialling from the directory.....................................................14
Entering names.....................................................................15
Network access support ................................................ 17
Caller list.......................................................................... 18
Audio settings ................................................................. 18
Handset volume....................................................................18
Ringer volume/melody ..........................................................19
Setting short beeps (advisory beep) .....................................19
Activating/deactivating the ringer..........................................19
Activating/deactivating warning and signal beeps ................19
Security............................................................................ 20
Changing the telephone PIN .................................................20
Hot key selection (direct station selection) ..........................21
Telephone lock......................................................................21
Dialling the emergency number ............................................22
Further settings............................................................... 22
Auto talk................................................................................22
Setting the display language .................................................22
Resetting the handset to the default configuration ..............23
Base settings ................................................................... 24
Registering the handset........................................................24
User options (short cuts) ............................................... 25
Room monitor ................................................................. 27
Appendix ......................................................................... 28

6
Giga 3000 Micro, IM1-engl, A31008-G3000-B022-1-6Z19 3000co.fm 31.03.00
Preparing the handset
Contents of the package
Enhanced Gigaset 3000 Micro handset, battery, belt clip,
charging unit, plug-in power supply unit, operating instruc-
tions.
Inserting the battery
• Insert the battery connector with the little protusion
facing up and left in the socket (incorrect insertion im-
possible) and then place the battery in the compartment –
see figure.
• Slide the cover approx. 3 mm into the battery compart-
ment and push gently forwards until it clicks into place.
•To o p e n the cover, press the grooved area on the cover
and slide back.
• Never use ordinary (non-rechargeable) batteries.
Only use the V30145-K1310-X143 battery sup-
plied (rechargeable), otherwise the battery cas-
ings may be destroyed (dangerous).
• The following symbol is displayed in the battery
compartment:
hUse battery type in accordance with
these operating instructions.
• Do not use third-party charging units as these
can damage the battery.
• Please dispose of the battery in an environmen-
tally friendly manner in accordance with the rele-
vant legislation.
NO.:
LOT:V30145-K1310-X143
Ni-MH3.6V600mAhtyp
CAUTION:
ACHTUNG:
Don'tthrowintofire,
shortcircuit,disassemble.
NichtinsFeuer
werfen,kurzschließen,

7
Giga 3000 Micro, IM1-engl, A31008-G3000-B022-1-6Z19 3000co.fm 31.03.00
Connecting the charging unit
Wall-mounting the charging unit
Only use the plug-in power supply unit sup-
plied.



max. ø 8 mm
max. ø 4 mm
2x
26 mm
3mm

8
Giga 3000 Micro, IM1-engl, A31008-G3000-B022-1-6Z19 3000co.fm 31.03.00
Charging the battery
The battery is supplied uncharged.
To charge the battery, insert the handset either into the base
station or the Gigaset 3000L Micro charging unit – you will
hear the confirmation beep. The charging operation is indi-
cated by a flashing LED on the handset:
Approved battery:
Toshiba Power Pack (NiMH), order no. V30145-K1310-X143.
Battery operating times/charging times:
Fitting the attachment clip
Push the clip onto the back of the handset until the protru-
sions slot into place.

Battery empty
8
Battery 2/3charged
F
Battery 1/3charged
7
Battery full
• Initially charge the batteries thoroughly; we recom-
mend charging the batteries for at least 16 hours with-
out interruption – irrespective of the charging status
icon.
• Once the first charging operation is complete, you can
replace the handset in the base station after any call.
Charging is controlled electronically. This ensures opti-
mum charging and prolongs battery life.
• The battery warms up during charging. This is normal
and not dangerous.
• The battery charging status is only correctly displayed af-
ter uninterrupted charging/discharging.
Capacity
(mAh)
Standby time
(hours)
Ta l k t i m e
(hours)
Charging
time
(hours)
600 up to 200 approx. 15 approx. 5

9
Giga 3000 Micro, IM1-engl, A31008-G3000-B022-1-6Z19 3000co.fm 31.03.00
Activating/deactivating the handset
B
Press the end call key for 1 second.
Activating/deactivating the keypad lock
Key activation is ineffective when the keypad lock is ena-
bled.
To answer an incoming call, press the talk key
D
– the key-
pad lock is automatically disabled for the call.
z
To activate/deactivate, press and hold
down for longer than 1 second.
The handset automatically activates when the battery is
inserted and when the handset is placed in the base sta-
tion/charging unit.

10
Giga 3000 Micro, IM1-engl, A31008-G3000-B022-1-6Z19 3000co.fm 31.03.00
Registering the handset
You can change the display language*(see page 22). After
doing this, switch your handset off and then on again.
You must register a new handset at the base station before
you can make any telephone calls. When you switch on your
handset, the message
5HJLVWHU"
appears.
Step 1:
• You must first prepare the Siemens base station:
Step 2:
• Now enter the following in the handset within one
minute:
<(6
Press the display key.
Enter base PIN
Ö2.Ö
Enter the base station’s system PIN (fac-
tory setting: 0000) and confirm – unas-
signed internal numbers are displayed.
e.g.
q
Enter the required call number – the base
name, e.g.
%DVH 
, is displayed (no
longer flashing).
Your handset is now ready for use!
* English is the default factory setting
Gigaset Preparing the base station
3010 Micro
3010/3015
Press the coloured key on the base station
for approx. 10 seconds until you hear the
signal tones.
3020, 3025
3030, 3035
In the base station menu select registration
option and confirm.
ISDN
models
Press the LED – flashes during registration.
1000/2000
models
See above for appropriate successor models
in the 3000 range, e.g. 3010 for 2010.
– To register at multiple base stations or to change base
names, see page 24.
– To modify the internal call number: re-register your hand-
set at the same base, see page 24.

11
Giga 3000 Micro, IM1-engl, A31008-G3000-B022-1-6Z19 3000co.fm 31.03.00
Making calls
Making external calls
P
Enter the call number.
If necessary, correct with
:
.
D
Press the talk key to start dialling.
Ending a call:
Press the end call key
B
.
Direct internal dialling
,17
Press the display key – your own internal
number is displayed.
e.g.
q
Enter the internal call number.
To call all handsets:
&$//$//
or

Ending a call:
Press the end call key
B
.
Answering a call
D
Press the talk key
or
LRemove the handset if it is sitting in the
base station - the connection is set up
without key activation ("Auto. Talk" -
default setting).
.
– You can cancel the dial operation with the
end call key
B
.
– You can enter a pause with the recall key
4
(hold down key).
– You can opt to not save entries, e.g. when controlling ex-
ternal telephone services: press the menu key

, select
6ZLWFK WR 7RQH
and confirm with
=
– none of the num-
bers entered afterwards will be saved.
To immediately deactivate the ringer: hold

down.
The call can be accepted while it appears on the display by
pressing the talk key
D
.

12
Giga 3000 Micro, IM1-engl, A31008-G3000-B022-1-6Z19 3000co.fm 31.03.00
Transferring an external call, making an
enquiry call
Siemens base stations allow you to transfer an external
call to another handset or to hold a call while making an
internal enquiry call.
,17
Press the display key.
e.g.
q
Dial the internal number.
When the user answers:
•transfer the call: press the end call key
B
.
•end the enquiry call: press
4
to revert to the caller
placed on hold.

13
Giga 3000 Micro, IM1-engl, A31008-G3000-B022-1-6Z19 3000co.fm 31.03.00
Redial
You can access the last call numbers dialled.
[<
Display and select the call number.
D
Start the dial operation.
Additional functions
All functions in the supplementary menu start as fol-
lows:
[<
Display and select call numbers.
9
Open the supplementary menu.
<
Ö2.Ö
Select the required function and con-
firm:
'LVSOD\ 1XPEHU
(further numbers can be added
before dialling);
'LDO 1XPEHU
(the selected call number is dialled);
&RS\ WR 'LU
(the call number can be saved in the tele-
phone directory);
(GLW (QWU\
(change the call number);
'HOHWH (QWU\
(delete the call number);
'LVSOD\ (QWU\
(the whole call number is displayed).

14
Giga 3000 Micro, IM1-engl, A31008-G3000-B022-1-6Z19 3000co.fm 31.03.00
Directories
With the directory
-
, you can store up to 100 call num-
bers and then dial them at the push of a button.
You can store prefixes for telephone companies and fre-
quently used call numbers in the network access list
M
(see also Network access support, page 17).
Apart from the entry operation, using the directory and the
network access list is identical.
Storing a call number
-
/
M
Display the directory/network access list.
9
Open the supplementary menu.
<
Ö2.Ö
Select
1HZ (QWU\
.
Name Enter the name, see page 15.
<
Scroll to the next line.
P
Enter the call number, see also note
below.
9
Open the supplementary menu.
<
Ö2.Ö
Confirm
6DYH (QWU\
.
Dialling from the directory
-
/
M
Display the directory/network access list.
e.g.
¬ ¬
Enter the first letters of the name, e.g.
press the key
¬
twice for "
(
or scroll
with
<
.
D
Press the talk key to start dialling.
– When entering the number, you can insert a pause with
the recall key
4
or a number from the network access
list via the supplementary menu
9
.
– You can, for example, store the number of a company’s
switchboard so that you only have to dial the extension
when making a call.
– You can also save incoming or outgoing call numbers dur-
ing a call.

15
Giga 3000 Micro, IM1-engl, A31008-G3000-B022-1-6Z19 3000co.fm 31.03.00
Entering names
To enter names, you can choose letters, digits and symbols
with the appropriate key:
Press the appropriate key repeatedly or hold it down:
The entries are sorted as follows:
✱, #, space, digit (0-9), letter (in alphabetical order), –, other
characters.
Upper/lowercase:
The first letter of the name is written automatically in
upper case, the letters immediately afterwards are written
in lower case.

Manual shift to upper/lower case for one
character.
Controlling the cursor:

Move the cursor to the left or right or to
the end of the word/line in the next line
(press briefly or hold down).
;<
Scroll up or down one line.
Deleting a character:
:
The character to the left of the cursor is
deleted (press briefly or hold down).
Inserting characters:
Characters are always inserted to the left of the cursor.
1x 2x 3x 4x 5x 6x 7x 8x 9x
®
1
q
abc2äàâãç
¬
def 3ëéèê
s
ghi4ïî

jkl5
u
mno6öñóôõ
v
pqr s7ß
w
t uv8üúùû
|
wx y z 9 ý æø å
"
T
*
*Blank
.–0,+:?!

a→A✱/()=&@
z
#£$

16
Giga 3000 Micro, IM1-engl, A31008-G3000-B022-1-6Z19 3000co.fm 31.03.00
Additional functions
-
/
M
Display the directory/network access list.
e.g.
w
Enter the first letter of the name, e.g.
press
w
for "
7
.
9
Open the supplementary menu.
<
Ö2.Ö
Select the required function and con-
firm:
'LVSOD\ 1XPEHU
(further numbers can be added);
'LDO 1XPEHU
(the call number is dialled);
1HZ (QWU\
(see page 14);
(GLW (QWU\
(change the call number/name);
'HOHWH (QWU\
(delete the call number);
'LVSOD\ (QWU\
(the whole call number is displayed);
&RS\ (QWU\
Prerequisite: both handset and base station support this
function.
You can copy the entry to another Comfort handset.
If
&RS\ HQWU\ WR ,17 +VHW
is displayed:
e.g.
¬
Ö2.Ö
Enter the number of the handset called
and confirm.
The handset called rings:
e.g.
D
Accept the call.
Te l . P I N
Ö2.Ö
Enter the telephone PIN of the handset
called and confirm – the entry is trans-
ferred.
'HOHWH /LVW
All entries are deleted.
&RS\ /LVW
Procedure as for "Copy Entry".
$YDLODEOH 0HPRU\
Indicates the memory available. This is shared by the direc-
tory, the network access list and the short cuts.

17
Giga 3000 Micro, IM1-engl, A31008-G3000-B022-1-6Z19 3000co.fm 31.03.00
Network access support
• Linking call numbers
This function allows you to merge two parts of a number.
M<
Open the network access list and select
an entry.
9
Open the supplementary menu.
=
Confirm
'LVSOD\ 1XPEHU
– the number is
displayed.
e.g.
P
Either enter the user’s call number or
open the directory and select a number.
D
Start the dial operation – the two parts of
the call numbers are dialled one after the
other.
• Speed dialling from the network access list
– You can save 10 numbers (0-9) in the call-by-call list for
speed dialling. These speed dialling numbers (0-9)
must be entered before the name,
e.g. "1Name".
– Hold down the relevant digit key (0-9) to display the
number saved.
Prerequisite: speed dialling number is saved!
e.g.
®
Hold down the relevant digit key – e.g. 1,
and the number saved under the name
"1Name" is displayed.
e.g.
P
Enter the user’s call number or open the
directory and select the number.
D
Start the dial operation – the two parts of
the call numbers are dialled, one after the
other.

18
Giga 3000 Micro, IM1-engl, A31008-G3000-B022-1-6Z19 3000co.fm 31.03.00
Caller list
Unanswered calls are also, for example, stored in the caller
list*.
New entries in the caller list are indicated by the display
symbol
,
.
,
Press the display key – the caller list, for
example, is displayed.
;<
Scroll to the required entry.
e.g. dial the call number:
D
Press the talk key.
Audio settings
Handset volume
You can set the handset volume to any of three levels – even
during a call!

Press the menu key.
Ö2.Ö
Select
6HWWLQJV
.
Ö2.Ö
Select
6RXQG 6HWWLQJV
.
<
Ö2.Ö
Select
+DQGVHW 9ROXPH
.

Ö2.Ö
Change the volume and save.
* Dependent on the base station, country and carrier services
In the case of base stations with answering machines,
this symbol
,
also indicates that new messages have
been recorded. Please refer to the appropriate operating
instructions.

19
Giga 3000 Micro, IM1-engl, A31008-G3000-B022-1-6Z19 3000co.fm 31.03.00
Ringer volume/melody
– You can choose between 5 ringer volumes, the
crescendo ring (increasing volume =C) and
ringer off (=0).
– You can choose between 10 ringer melodies.

Press the menu key.
Ö2.Ö
Select
6HWWLQJV
.
Ö2.Ö
Select
6RXQG 6HWWLQJV
.
<
Ö2.Ö
Select
5LQJHU 9ROXPH
or
5LQJHU 0HORG\
.

Ö2.Ö
Change the setting and save.
Setting short beeps (advisory beep)
A call is signalled by a single short advisory beep when you
set the
%HHS
function.

Press the menu key.
Ö2.Ö
Select
6HWWLQJV
.
Ö2.Ö
Select
6RXQG 6HWWLQJV
.
<
Ö2.Ö
Select
%HHS
.
9
= activated.
Activating/deactivating the ringer
You can deactivate the ringer if it disturbs you, for example,
during a meeting – all calls appear only on the display, but
can, however, be accepted while displayed by pressing the
talk key
D
.

To activate/deactivate this feature, hold
down the key until the cancelled bell icon
appears or disappears.
Activating/deactivating warning and signal
beeps
•Key Beeps: every keystroke is confirmed.
•Batt. Low Beep: the battery needs to be charged.
•Confirm. Beeps: confirmation beep (1 beep) at the end of
the input/settings and when replacing the handset in the
charging unit; error beep (4 short tones) following an in-
correct entry.

20
Giga 3000 Micro, IM1-engl, A31008-G3000-B022-1-6Z19 3000co.fm 31.03.00

Press the menu key.
Ö2.Ö
Select
6HWWLQJV
.
Ö2.Ö
Select
6RXQG 6HWWLQJV
.
<
Select the required function.
Ö2.Ö
Activate or deactivate the function.
9
= beep activated.
Security
You can change the telephone PIN, set up direct station
selection or lock your telephone (handset).
The security functions begin as follows:

Press the menu key.
Ö2.Ö
Select
6HWWLQJV
.
<
Ö2.Ö
Select
6HFXULW\
.
Te l . P I N
Ö2.Ö
Enter the telephone PIN (factory setting:
0000).
<
Select the required function:
Changing the telephone PIN
Important functions/settings are protected by the PIN (Per-
sonal Identification Number) on your handset.
First steps are as described at the start of the Safety pre-
cautions section, then:
Ö2.Ö
Select
&KDQJH 3,1
.
Te l . P I N
Ö2.Ö
Enter the new telephone PIN
(4 digits) twice and confirm – the new tel-
ephone PIN is saved.
Do not forget your telephone PIN! It can only be reset by
calling the Siemens hotline, see page 28.
Te l . P I N
Ö2.Ö