Siemens SCALANCE W700 User manual

Approvals SCALANCE W700 802.11ax
SIMATIC NET
Industrial Wireless LAN
Approvals SCALANCE W700
802.11ax
Reference Manual
08/2021
C79000
-G8976-C621-02
SCALANCE WxM766-1
1

Siemens AG
Digital Industries
Postfach 48 48
90026 NÜRNBERG
GERMANY
C79000-G8976-C621-02
Ⓟ
08/2021 Subject to change
Copyright © Siemens AG 2021.
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.

Approvals SCALANCE W700 802.11ax
Reference Manual, 08/2021, C79000-G8976-C621-02 3
Table of contents
1 SCALANCE WxM766-1............................................................................................................................ 7
1.1 Type designations................................................................................................................ 8
1.2 EC declaration of conformity................................................................................................ 9
1.2.1 ATEX ................................................................................................................................... 9
1.2.2 RoHS ................................................................................................................................. 10
1.2.3 RED ................................................................................................................................... 10
1.2.3.1 Protection of health and safety........................................................................................... 10
1.2.3.2 EMC................................................................................................................................... 10
1.2.3.3 Efficient use of the radio spectrum..................................................................................... 11
1.2.4 Other technical standards .................................................................................................. 12
1.2.5 Products ............................................................................................................................ 12
1.3 UK Declaration of Conformity............................................................................................. 13
1.3.1 Equipment and Protective Systems Intended for use in Potentially Explosive
Atmospheres Regulations 2016.......................................................................................... 13
1.3.2 The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012 ............................................................................................. 14
1.3.3 Radio Equipment Regulations 2017.................................................................................... 14
1.3.3.1 Protection of health and safety........................................................................................... 14
1.3.3.2 EMC................................................................................................................................... 14
1.3.3.3 Efficient use of the radio spectrum..................................................................................... 15
1.3.4 Other technical standards .................................................................................................. 16
1.3.5 Products ............................................................................................................................ 16
1.4 Supplier’s declaration of conformity ................................................................................... 17
1.5 General approvals.............................................................................................................. 18
1.6 National approvals............................................................................................................. 22
Index.................................................................................................................................................... 25

Table of contents
Approvals SCALANCE W700 802.11ax
4Reference Manual, 08/2021, C79000-G8976-C621-02

Approvals SCALANCE W700 802.11ax
Reference Manual, 08/2021, C79000-G8976-C621-02 5
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens’ products and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be connected
to an enterprise network or the internet if and to the extent such a connection is necessary
and only when appropriate security measures (e.g. firewalls and/or network segmentation)
are in place.
For additional information on industrial security measures that may be implemented, please
visit
https://www.siemens.com/industrialsecurity (https://www.siemens.com/industrialsecurity).
Siemens’ products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends that product updates are applied as soon as they are
available and that the latest product versions are used. Use of product versions that are no
longer supported, and failure to apply the latest updates may increase customer’s exposure to
cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed under
https://www.siemens.com/industrialsecurity (https://www.siemens.com/industrialsecurity).

Approvals SCALANCE W700 802.11ax
Reference Manual, 08/2021, C79000-G8976-C621-02 7
SCALANCE WxM766-1
1
Note
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.

SCALANCE WxM766-1
1.1 Type designations
Approvals SCALANCE W700 802.11ax
8Reference Manual, 08/2021, C79000-G8976-C621-02
1.1 Type designations
Scope of validity
The approvals listed in this section apply to the following products:
Product
Certification ID
Article number
Access points
SCALANCE WAM766-1
MSAX65-W1-M12-E2
6GK5766-1GE00-7DA0
6GK5766-1GE00-7DB0 (USA)
SCALANCE WAM766-1 EEC
MSAX65-W1-M12-E2
6GK5766-1GE00-7TA0
6GK5766-1GE00-7TB0 (USA)
Client
SCALANCE WUM766-1
MSAX65-W1-M12-E2
6GK5766-1GE00-3DA0
6GK5766-1GE00-3DB0 (USA)

SCALANCE WxM766-1
1.2 EC declaration of conformity
Approvals SCALANCE W700 802.11ax
Reference Manual, 08/2021, C79000-G8976-C621-02 9
1.2 EC declaration of conformity
The EC Declaration of Conformity is available for all responsible authorities at:
Siemens Aktiengesellschaft
Digital Industries
Process Automation
DE
-76187 Karlsruhe
Germany
You can find the current EU declaration of conformity for these products on the Internet
pages under Siemens Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/ps/15853/cert).
The SIMATIC NET products described in this document meet the requirements of the
following EU directives:
•ATEX directive 2014/34/EU
Directive of the European Parliament and the Council of 26 February 2014 on the
approximation of the laws of the member states concerning equipment and protective
systems intended for use in potentially explosive atmospheres, official journal of the EU
L96, 29/03/2014, pages 309–356
•RoHS directive 2011/65/EU
Directive of the European Parliament and of the Council of 8 June 2011 on the restriction
of the use of certain hazardous substances in electrical and electronic equipment, official
journal of the EC L174, 01/07/2011, pages 88-110
•Radio equipment directive 2014/53/EU (RED, Radio Equipment Directive)
Directive of the European Parliament and of the Council of 16 April 2014 on the
harmonization of the laws of the member states relating to placing radio equipment on
the market; official journal of the EU L153, 22/05/2014, pages 62–106
1.2.1 ATEX
ATEX directive (correct usage in potentially explosive atmospheres)
The SIMATIC NET product meets the requirements of the EU Directive 2014/34/EU
"Equipment and Protective Devices for Use in Potentially Explosive Atmospheres".
1
EN IEC 60079-0
Hazardous areas - Part 0: Equipment - General requirements
2
EN 60079-7
Explosive atmospheres - Part 7: Equipment protection through increased safety "e"

SCALANCE WxM766-1
1.2 EC declaration of conformity
Approvals SCALANCE W700 802.11ax
10 Reference Manual, 08/2021, C79000-G8976-C621-02
1.2.2 RoHS
RoHS directive (restriction of the use of certain hazardous substances)
The SIMATIC NET product meets the requirements of the EU Directive 2011/65/EU on the
restriction of the use of certain hazardous substances in electrical and electronic equipment:
Applied standard:
3
EN IEC 63000
Technical documentation for the assessment electrical and electronic prod
ucts with
respect to restriction of hazardous substances
1.2.3 RED
1.2.3.1 Protection of health and safety
Article 3 (1) a) protection of health and safety
4
EN IEC 62368-1
Equipment for audio, video, information and communication technology
- Part 1:
Safety requirements
5
EN IEC / IEC 62311
Assessment of electronic and electrical equipment related to human exposure
restrictions for electromagnetic fields (0 Hz – 300 GHz)
6
EN IEC 62368-3
Equipment for audio, video, information and communication technology
- Safety -
Part 3: DC power transfer through information technology communication cabling
1.2.3.2 EMC
Art. 3 (1) b - EMC
7
EN 50121-3-2
Railway applications
- Electromagnetic compatibility - part 3-2: Railway Vehicles -
Devices
8
EN 50121-4
Railway applications
- Electromagnetic compatibility - part 4: Interference emissions
and immunity of signal telecommunications equipment
9
ETSI EN 301 489-1
Electromagnetic compatibility and radio spectrum matters (ERM)
- Electromagnetic
compatibility fo
r radio equipment and services - Part 1 : Common technical
requirements

SCALANCE WxM766-1
1.2 EC declaration of conformity
Approvals SCALANCE W700 802.11ax
Reference Manual, 08/2021, C79000-G8976-C621-02 11
10
ETSI EN 301 489-3
Electromagnetic compatibility and radio spectrum matters (ERM)
– Electromagnetic
compatibility (EMC) for radio equipment and services
– Part 3: Specific conditions
for wireless devices with a low range (SRD) for use on frequencies between 9
kHz
and 246 GHz
11
ETSI EN 301 489-17
Electromagnetic compatibility and radio spectrum matters (ERM)
- Electromagnetic
compatibility for radio equipment and services
- Part 17: Specific conditions for
broadband data transmission systems
12
EN 55032
Electromagnetic compatibility of multimedia equipment – Emission requirements
13
EN 55035
Electromagnetic compatibility of multimedia equipment - Immunity requirements
14
EN 61000-6-1
Electromagnetic compatibility (EMC)
- Part 6-1: Generic standards - Immunity for
residential, commercial and light-industrial environments
15
EN 61000-6-2
Electromagnetic compatibility (EMC)
- Part 6-2: Generic standards - Immunity for
industrial environments
16
EN 61000-6-3
Electromagnetic compatibility (EMC)
- Part 6-3: Generic standards - Emission
standard for residential, commercial and light-industrial environments
17
EN 61000-6-4
Electromagnetic compatibility (EMC)
- Part 6-4: Generic standards - Emission
standard for industrial environments
18
EN IEC 61000-6-8
Generic standards
- Emission standard for professional equipment in commercial
and light-industrial locations
1.2.3.3 Efficient use of the radio spectrum
Art. 3 (2) Efficient use of the radio spectrum
19
ETSI EN 300 328
Broadband transmission systems
– Data transmission equipment operating in the
2.4 GHz ISM band and using broadband modulation techniques. Harmonized EN
covering the essential requirements of article 3.2 of the EU Directive 2014/53/EU
20
ETSI EN 300 440 V2.1.1
Electromagnetic compatibility and radio spectrum matters (ERM)
– short range
devices
(SRD) – Radio equipment to be used in the 1 GHz to 40
GHz frequency range
-
Harmonized EN covering the essential requirements of article 3.2 of the EU
Directive 2014/53/EU
21
ETSI EN 301 893
Broadband Radio Access Networks (BRAN)
– 5 GHz high performance RLAN –
Harmonized EN covering the essential requirements of article 3.2 of the EU
Directive
2014/53/EU

SCALANCE WxM766-1
1.2 EC declaration of conformity
Approvals SCALANCE W700 802.11ax
12 Reference Manual, 08/2021, C79000-G8976-C621-02
1.2.4 Other technical standards
22
CISPR 11
Industrial, scientific and medical equipment
- Radio-frequency disturbance
characteristics - Limits and methods of measurement
23
CISPR 32
Electromagnetic compatibility of multimedia equipment. Emission requirements
24
CISPR 35
Electromagnetic compatibility of multimedia equipment - Immunity requirements
25
EN IEC / IEC 61000-6-1
Electromagnetic compatibility (EMC)
- Part 6-1: Generic standards - Immunity for
residential, commercial and light-industrial environments
26
EN IEC / IEC 61000-6-2
Electromagnetic compatibility
(EMC) - Part 6-2: Generic standards - Immunity
standard for industrial environments
27
EN/ IEC 61000-6-3
Electromagnetic compatibility
(EMC) - Part 6-3: Generic standards - Emission
standard for residential, commercial and light-industrial environments
28
EN IEC / IEC 61000-6-4
Electromagnetic compatibility
(EMC) - Part 6-4: Generic standards - Emission
standard for industrial environments
29
EN IEC / IEC 61000-6-8
Electromagnetic compatibility
(EMC) - Part 6-8: Generic standards - Emission
standard for professional equipment in commercial and light-industrial locations
30
NAMUR NE21
Automation engineering of modular systems in the process industry
- Modelling of
module services
1.2.5 Products
CE conformity
The standards applying to the product are described in ATEX (Page 9), RoHS (Page 10) and
RED (Page 10).
Product
Standards
SCALANCE WAM 766-1
1,2,3,4,5,6,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,
27,28
SCALANCE WAM 766-1 EEC
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,
26,27,28
SCALANCE WUM 766-1
1,2,3,4,5,6,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,
27,28

SCALANCE WxM766-1
1.3 UK Declaration of Conformity
Approvals SCALANCE W700 802.11ax
Reference Manual, 08/2021, C79000-G8976-C621-02 13
1.3 UK Declaration of Conformity
The UK declaration of conformity is available to all responsible authorities at:
Siemens Aktiengesellschaft
Digital Industries
Process Automation
DE
-76187 Karlsruhe
Germany
UK Importer:
Siemens plc
Manchester M20 2UR
United Kingdom
You can find the current UK Declaration of Conformity for these products on the Internet
pages under Siemens Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/ps/15853/cert)
The SIMATIC NET products described in this document meet the requirements of the
following directives:
•Equipment and Protective Systems Intended for use in Potentially Explosive Atmospheres
Regulations 2016
•The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012
•Radio Equipment Regulations 2017
1.3.1 Equipment and Protective Systems Intended for use in Potentially Explosive
Atmospheres Regulations 2016
Correct usage in potentially explosive atmospheres
The SIMATIC NET product meets the requirements of "Equipment and Protective Systems
Intended for use in Potentially Explosive Atmospheres Regulations ".
1
EN IEC 60079-0
Hazardous areas - Part 0: Equipment - General requirements
2
EN 60079-7
Explosive atmospheres - Part 7: Equipment protection through increased safety "e"

SCALANCE WxM766-1
1.3 UK Declaration of Conformity
Approvals SCALANCE W700 802.11ax
14 Reference Manual, 08/2021, C79000-G8976-C621-02
1.3.2 The Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012
Restriction of the use of certain hazardous substances
The SIMATIC NET product meets the requirements of "The Restriction of the Use of Certain
Hazardous Substances in Electrical and Electronic Equipment Regulations 2012".
Applied standard:
3
EN IEC 63000
Technical documentation for the assessment electrical and electronic products with
respect to restriction of hazardous substances
1.3.3 Radio Equipment Regulations 2017
1.3.3.1 Protection of health and safety
Article 3 (1) a) protection of health and safety
4
EN IEC 62368-1
Equipment for audio, video, information and communication technology
- Part 1:
Safety requirements
5
EN IEC / IEC 62311
Assessment of electronic and
electrical equipment related to human exposure
restrictions for electromagnetic fields (0 Hz – 300 GHz)
6
EN IEC 62368-3
Equipment for audio, video, information and communication technology
- Safety -
Part 3: DC power transfer through information technology communication cabling
1.3.3.2 EMC
Art. 3 (1) b - EMC
7
EN 50121-3-2
Railway applications
- Electromagnetic compatibility - part 3-2: Railway Vehicles -
Devices
8
EN 50121-4
Railway applications
- Electromagnetic compatibility - part 4: Interference emissions
and immunity of signal telecommunications equipment
9
ETSI EN 301 489-1
Electromagnetic compatibility and radio spectrum matters (ERM)
- Electromagnetic
compatibility fo
r radio equipment and services - Part 1 : Common technical
requirements

SCALANCE WxM766-1
1.3 UK Declaration of Conformity
Approvals SCALANCE W700 802.11ax
Reference Manual, 08/2021, C79000-G8976-C621-02 15
10
ETSI EN 301 489-3
Electromagnetic compatibility and radio spectrum matters (ERM)
– Electromagnetic
compatibility (EMC) for radio equipment and services
– Part 3: Specific conditions
for wireless devices with a low range (SRD) for use on frequencies between 9
kHz
and 246 GHz
11
ETSI EN 301 489-17
Electromagnetic compatibility and radio spectrum matters (ERM)
- Electromagnetic
compatibility for radio equipment and services
- Part 17: Specific conditions for
broadband data transmission systems
12
EN 55032
Electromagnetic compatibility of multimedia equipment – Emission requirements
13
EN 55035
Electromagnetic compatibility of multimedia equipment - Immunity requirements
14
EN 61000-6-1
Electromagnetic compatibility (EMC)
- Part 6-1: Generic standards - Immunity for
residential, commercial and light-industrial environments
15
EN 61000-6-2
Electromagnetic compatibility (EMC)
- Part 6-2: Generic standards - Immunity for
industrial environments
16
EN 61000-6-3
Electromagnetic compatibility (EMC)
- Part 6-3: Generic standards - Emission
standard for residential, commercial and light-industrial environments
17
EN 61000-6-4
Electromagnetic compatibility (EMC)
- Part 6-4: Generic standards - Emission
standard for industrial environments
18
EN IEC 61000-6-8
Generic standards
- Emission standard for professional equipment in commercial
and light-industrial locations
1.3.3.3 Efficient use of the radio spectrum
Art. 3 (2) Efficient use of the radio spectrum
19
ETSI EN 300 328
Broadband transmission systems
– Data transmission equipment operating in the
2.4 GHz ISM band and using broadband modulation techniques. Harmonized EN
covering the essential requirements of article 3.2 of the EU Directive 2014/53/EU
20
ETSI EN 300 440 V2.1.1
Electromagnetic compatibili
ty and radio spectrum matters (ERM) – short range
devices
(SRD) – Radio equipment to be used in the 1 GHz to 40
GHz frequency range
-
Harmonized EN covering the essential requirements of article 3.2 of the EU
Directive 2014/53/EU
21
ETSI EN 301 893
Broadb
and Radio Access Networks (BRAN) – 5 GHz high performance RLAN –
Harmonized EN covering the essential requirements of article 3.2 of the EU Directive
2014/53/EU

SCALANCE WxM766-1
1.3 UK Declaration of Conformity
Approvals SCALANCE W700 802.11ax
16 Reference Manual, 08/2021, C79000-G8976-C621-02
1.3.4 Other technical standards
Art. 3 (3) a)-i) Delegated acts for radio equipment
22
CISPR 11
Industrial, scientific and medical equipment
- Radio-frequency disturbance
characteristics - Limits and methods of measurement
23
CISPR 32
Electromagnetic compatibility of multimedia equipment. Emission requirements
24
CISPR 35
Electromagnetic compatibility of multimedia equipment - Immunity requirements
25
EN IEC / IEC 61000-6-1
Electromagnetic compatibility (EMC)
- Part 6-1: Generic standards - Immunity for
residential, commercial and light-industrial environments
26
EN IEC / IEC 61000-6-2
Electromagnetic compatibility
(EMC) - Part 6-2: Generic standards - Immunity
standard for industrial environments
27
EN/ IEC 61000-6-3
Electromagnetic
compatibility (EMC) - Part 6-3: Generic standards - Emission
standard for residential, commercial and light-industrial environments
28
EN IEC / IEC 61000-6-4
Electromagnetic compatibility
(EMC) - Part 6-4: Generic standards - Emission
standard for industrial environments
29
EN IEC / IEC 61000-6-8
Electromagnetic compatibility
(EMC) - Part 6-8: Generic standards - Emission
standard for professional equipment in commercial and light-industrial locations
30
NAMUR NE21
Automation engineering of modular systems in the process industry
- Modelling of
module services
1.3.5 Products
UK conformity
The standards applying to the product are described in Equipment and Protective Systems
Intended for use in Potentially Explosive Atmospheres Regulations 2016 (Page 13), The
Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012 (Page 14) and Radio Equipment Regulations 2017 (Page 14).
Product
Standards
SCALANCE WAM 766-1
1,2,3,4,5,6,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,
27,28
SCALANCE WAM 766-1 EEC
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,
26,27,28
SCALANCE WUM 766-1
1,2,3,4,5,6,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,
27,28

SCALANCE WxM766-1
1.4 Supplier’s declaration of conformity
Approvals SCALANCE W700 802.11ax
Reference Manual, 08/2021, C79000-G8976-C621-02 17
1.4 Supplier’s declaration of conformity
The RCM declaration of conformity is available to all responsible authorities at:
Siemens Aktiengesellschaft
Digital Industries
Process Automation
DE
-76187 Karlsruhe
Germany
You can find the current Supplier's declaration of conformity for these products on the
Internet pages under Siemens Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/ps/15853/cert)
As required by the following Notices:
•Radiocommunications (Compliance Labelling - Devices) Notice 2014 made under section
182 of the Radiocommunications Act 1992;
•Radiocommunications Labelling (Electromagnetic Compatibility) Notice 2017 made under
section 182 of the Radiocommunications Act 1992
•Radiocommunications (Compliance Labelling – Electromagnetic Radiation) Notice 2014
made under section 182 of the Radiocommunications Act 1992
•Telecommunications (Labelling Notice for Customer Equipment and Customer Cabling)
Instrument 2015 made under section 407 of the Telecommunications Act 1997.
Including the standard
•ETSI EN 301 489-1
•ETSI EN 301 489-3
•ETSI EN 301 489-17
•ETSI EN 300 328
•ETSI EN 300 440
•ETSI EN 301 893

SCALANCE WxM766-1
1.5 General approvals
Approvals SCALANCE W700 802.11ax
18 Reference Manual, 08/2021, C79000-G8976-C621-02
1.5 General approvals
ATEX/IECEx, UKEX, CCC-Ex
WARNING
Risk of explosion in hazardous areas
When using SIMATIC NET products in hazardous area zone 2, make absolutely sure that the
associated conditions in the following document are adhered to:
"SIMATIC NET Product Information Use of subassemblies/modules in a Zone 2 Hazardous
Area".
You will find this document
•on the data medium that ships with some devices.
•on the Internet pages under Siemens Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/).
Enter the document identification number C234 as the search term.
The markings of the electrical devices are:
II 3G Ex ec IIC T4 Gc
DEKRA 18ATEX0026 X
IECEx DEK 18.0018X
Ex ec IIC T4 Gc
DEKRA 21UKEX0002 X
UK Importer:
Siemens plc,
Manchester M20 2UR, UK
(Ex na IIC T4 Gc, not on the nameplate)
The products meet the requirements of the following standards:
•EN/IEC 60079-7, GB 3836.8
•EN IEC/IEC 60079-0, GB 3836.1
You will find the current versions of the standards in the currently valid certificates.
NEMA TS2 (EEC)
EEC versions meet the requirements of the standard
NEMA TS2 (Traffic Controller Assemblies with NTCIP Requirements)

SCALANCE WxM766-1
1.5 General approvals
Approvals SCALANCE W700 802.11ax
Reference Manual, 08/2021, C79000-G8976-C621-02 19
Railway approval
EEC variants of the device meet the requirements of the standards:
•EN 45545
•EN 50155
•EN 50121-3-2
•EN 50121-4
Note
When used on railway stock, a stabilized power supply must be used to comply with
EN50155.
E1
The device meets the requirements of the ECE R10 directive.
Test number 10 R - 057876
FM
The product meets the requirements of the standards:
•Factory Mutual Approval Standard Class Number 3611 / 3600 / 3810 / ANSI ISA-61010-1
•FM Hazardous (Classified) Location Electrical Equipment:
Non Incendive / Class I / Division 2 / Groups A,B,C,D / T4 and
Non Incendive / Class I / Zone 2 / Group IIC / T4
cULus Approval for Information Technology Equipment
cULus Listed I. T. E.
Underwriters Laboratories Inc. complying with
•UL 62368-1
•CSA C22.2 No. 62368-1
Report no. E115352

SCALANCE WxM766-1
1.5 General approvals
Approvals SCALANCE W700 802.11ax
20 Reference Manual, 08/2021, C79000-G8976-C621-02
cULus Information Technology Equipment
cULus Listed I. T. E.
Underwriters Laboratories Inc. complying with
•UL 61010-1
•UL 61010-2-201
•CSA C22.2 NO 61010-1-12
•CSA C22.2 NO 61010-2-201
Report no. E115352
cULus- approval for Hazardous Location
cULus Listed I. T. E. for HAZ. LOC. Underwriters Laboratories Inc. complying with
•UL 121201 (Non Incendive electrical equipment) approved for use in Class I, Division 2,
Groups A, B, C, D, T4.
•UL CSA C22.2 NO 213 (Non Incendive electrical equipment) approved for use in Class I,
Zone 2, Group IIC, T4.
FCC approval
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
___________________________________________________________________________
Notice
Changes or modifications made to this equipment not expressly approved by SIEMENS may
void the FCC authorization to operate this equipment.
___________________________________________________________________________
IEEE 802.11b or g operation of this product in the USA is firmware-limited to channels 1
through 11.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.