Siemens SCALANCE W778-1 User manual

SIMATIC NET
Industrial Wireless LAN
SCALANCE W778
-1 /W738-1
Operating Instructions
MSN65-W1-M12-E2
07/2020
C79000
-G8976-C450-06
Introduction
1
Security
recommendations
2
Safety notices
3
Description of the device
4
Mounting
5
Connection
6
Upkeep and maintenance
7
Technical specifications
8
Dimension drawing
9
Approvals
10

Siemens AG
Digital Industries
Postfach 48 48
90026 NÜRNBERG
GERMANY
C79000-G8976-C450-06
Ⓟ
07/2020 Subject to change
Copyright © Siemens AG 2017 - 2020
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to
prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a
safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices
shown below are graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger
will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning
relating to property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the
specific task in accordance with the relevant documentation, in particular its warning notices and safety
instructions. Qualified personnel are those who, based on their training and experience, are capable of
identifying risks and avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant
technical documentation. If products and components from other manufacturers are used, these must be
recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning,
operation and maintenance are required to ensure that the products operate safely and without any
problems. The permissible ambient conditions must be complied with. The information in the relevant
documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this
publication may be trademarks whose use by third parties for their own purposes could violate the rights of
the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in
subsequent editions.

SCALANCE W778-1 /W738-1
Operating Instructions, 07/2020, C79000-G8976-C450-06 3
Table of contents
1 Introduction .................................................................................................................................................5
2 Security recommendations .......................................................................................................................7
3 Safety notices........................................................................................................................................... 13
4 Description of the device........................................................................................................................ 15
4.1 Description of the device................................................................................................................ 15
4.2 Accessories ....................................................................................................................................... 17
4.2.1 Data line............................................................................................................................................. 18
4.2.2 Flexible connecting cables and antennas................................................................................... 20
4.2.2.1 Flexible connecting cables............................................................................................................. 20
4.2.2.2 Antennas............................................................................................................................................ 21
4.3 LED display........................................................................................................................................ 24
4.4 Reset button...................................................................................................................................... 27
5 Mounting................................................................................................................................................... 29
5.1 Safety notices for installation........................................................................................................ 29
5.2 Types of installation ........................................................................................................................ 31
5.3 Wall mounting ................................................................................................................................... 32
5.4 Installation on a DIN rail................................................................................................................. 33
5.4.1 Installation with the DIN rail mounting adapter ........................................................................ 33
5.4.2 Mounting with bracket support..................................................................................................... 35
6 Connection................................................................................................................................................ 39
6.1 Safety when connecting up............................................................................................................ 39
6.2 Explosion hazard when disconnecting or replacing live cables (FM, ATEX) ....................... 42
6.3 Suitable cables for temperatures above 70 °C - cable 50 °C - 70 °C (ATEX) .............. 42
6.4 Power supply..................................................................................................................................... 43
6.5 Ethernet.............................................................................................................................................. 46
6.6 Antenna connector........................................................................................................................... 47
6.7 Replacing the PLUG (C-PLUG or KEY-PLUG)........................................................................... 49
6.8 Grounding .......................................................................................................................................... 52
7 Upkeep and maintenance....................................................................................................................... 53
7.1 Device configuration with PRESET-PLUG.................................................................................. 53
7.2 Restoring the factory settings ....................................................................................................... 56
7.3 Firmware update via WBM or CLI not possible ......................................................................... 57
8 Technical specifications......................................................................................................................... 59

Table of contents
SCALANCE W778-1 /W738-1
4Operating Instructions, 07/2020, C79000-G8976-C450-06
9 Dimension drawing.................................................................................................................................. 61
10 Approvals .................................................................................................................................................. 63
Index .......................................................................................................................................................... 65

SCALANCE W778-1 /W738-1
Operating Instructions, 07/2020, C79000-G8976-C450-06 5
Introduction
1
Validity of the Operating Instructions
These operating instructions cover the following products:
Article number Article number
US version
Access points
SCALANCE W778-1 M12
6GK5778-1GY00-0AA0
6GK5778-1GY00-0AB0
SCALANCE W778-1 M12 EEC
6GK5778-1GY00-0TA0
6GK5778-1GY00-0TB0
Client module
SCALANCE W738-1 M12
6GK5738-1GY00-0AA0
6GK5738-1GY00-0AB0
These operating instructions apply to the following software version:
•SCALANCE W778/W738 with firmware as of version 6.5
Definition
An access point is a node in a WLAN that also performs administrative functions in the
network and, for example, provides client modules with a connection to wired networks,
to other client modules in the same wireless cell or in other wireless cells.
Purpose of the Operating Instructions
Based on the operating instructions, you will be able to install and connect up the
SCALANCE W778/W738 correctly. The configuration and the integration of the device in
a WLAN are not described in these instructions.
Documentation on the accompanying CD
You will find detailed information about configuration in the SCALANCE W700
configuration manuals on the accompanying SIMATIC NET IWLAN CD under the file
name:
PH_SCALANCE-W770-W730-WBM_76.pdf and PH_SCALANCE-W770-W730-
CLI_76.pdf
Note
Make sure that you read the explanations and instructions in the readme.h
tm file

Introduction
SCALANCE W778-1 /W738-1
6Operating Instructions, 07/2020, C79000-G8976-C450-06
Training, Service & Support
You will find information on Training, Service & Support in the multi-language document
"DC_support_99.pdf" on the data medium supplied with the documentation.
Security information
Siemens provides products and solutions with industrial security functions that support
the secure operation of plants, systems, machines and networks.
In order toprotect plants, systems, machines and networks against cyber threats, it is
necessary toimplement –and continuously maintain –aholistic, state-of-the-art
industrial security concept. Siemens’products and solutions constitute one element of
such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be
connected toan enterprise network orthe internet ifand tothe extent such a connection
is necessary and only when appropriate security measures (e.g. firewalls and/or network
segmentation) are in place.
For additional information on industrial security measures that may be implemented,
please visit https://www.siemens.com/industrialsecurity
Siemens’products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends that product updates are applied as soon as they
are available and that the latest product versions are used. Use ofproduct versions that
are no longer supported, and failure to apply the latest updates may increase customers’
exposure to cyber threats.
To stayinformed about product updates, subscribe totheSiemens Industrial Security
RSS Feed under https://www.siemens.com/industrialsecurity
Recycling and disposal
The products are low in pollutants, can be recycled and meet the requirements of the
WEEE directive 2012/19/EU for the disposal of electrical and electronic equipment.
Do not dispose of the products at public disposal sites.
For environmentally friendly recycling and the disposal of your old device contact a
certified disposal company for electronic scrap or your Siemens contact (Product return
(https://support.industry.siemens.com/cs/ww/en/view/109479891)).
Note the different national regulations.
Trademarks
The following and possibly other names not identified by the registered trademark sign ®
are registered trademarks of Siemens AG:
SIMATIC NET, SCALANCE, C-PLUG, RCoax

SCALANCE W778-1 /W738-1
Operating Instructions, 07/2020, C79000-G8976-C450-06 7
Security recommendations
2
To prevent unauthorized access, note the following security recommendations.
General
•You should make regular checks to make sure that the device meets these
recommendations and/or other security guidelines.
•Evaluate your plant as a whole in terms of security. Use a cell protection concept with
suitable products (https://www.industry.siemens.com/topics/global/en/industrial-
security/pages/default.aspx).
•When the internal and external network are disconnected, an attacker cannot access
internal data from the outside. Therefore operate the device only within a protected
network area.
•For communication via non-secure networks use additional devices with VPN
functionality to encrypt and authenticate the communication.
•Terminate management connections correctly (WBM. Telnet, SSH etc.).
Physical access
•Restrict physical access to the device to qualified personnel.
•The memory card or the PLUG (C-PLUG, KEY-PLUG, security PLUG) contains
sensitive data such as certificates, keys etc. that can be read out and modified.
Software (security functions)
•Keep the firmware up to date. Check regularly for security updates of the product.
You will find information on this on the Internet pages "Industrial Security
(http://www.siemens.com/industrialsecurity)".
•Inform yourself regularly about security advisories and bulletins published by Siemens
ProductCERT (http://www.siemens.com/cert/en/cert-security-advisories.htm).
•Only activate protocols that you really require to use the device.
•Use the security functions such as address translation with NAT (Network Address
Translation) or NAPT (Network Address Port Translation) to protect receiving ports
from access by third parties.
•Restrict access to the device with a firewall or rules in an access control list (ACL -
Access Control List).
•If RADIUS authentication is via remote access, make sure that the communication is
within the secured network area or is via a secure channel.
•The option of VLAN structuring provides good protection against DoS attacks and
unauthorized access. Check whether this is practical or useful in your environment.

Security recommendations
SCALANCE W778-1 /W738-1
8Operating Instructions, 07/2020, C79000-G8976-C450-06
•Use a central logging server to log changes and access operations. Operate your
logging server within the protected network area and check the logging information
regularly.
•Use WPA2/ WPA2-PSK with AES to protect the WLAN. If iPCF or iPCF-MC is used,
use the AES encryption.
Passwords
•Define rules for the assignment of passwords.
•Regularly change your passwords to increase security.
•Use passwords with a high password strength.
•Make sure that all passwords are protected and inaccessible to unauthorized
persons.
•A password must be changed if it is known or suspected to be known by unauthorized
persons.
•Do not use the same password for different users and systems.
Keys and certificates
•The device contains a pre-installed certificate with key. Replace this certificate with a
self-made certificate with key. We recommend that you use a certificate signed by a
reliable external or internal certification authority. You can install the certificate via
the WBM (System > Load and Save).
•Use the certification authority including key revocation and management to sign the
certificates.
•Ensure that user-defined private keys are protected and inaccessible to unauthorized
persons.
•Verify certificates and fingerprints on the server and client to prevent "man in the
middle" attacks.
•It is recommended that you use password-protected certificates in the PKCS#12
format.
•It is recommended that you use certificates with a key length of at least 2048 bits.
•Change keys and certificates immediately, if there is a suspicion of compromise.

Security recommendations
SCALANCE W778-1 /W738-1
Operating Instructions, 07/2020, C79000-G8976-C450-06 9
Secure/non-secure protocols and services
•Avoid and disable non-secure protocols, for example Telnet and TFTP. For historical
reasons, these protocols are still available, however not intended for secure
applications. Use non-secure protocols on the device with caution.
•Check whether use of the following protocols and services is necessary:
–Non-authenticated and unencrypted ports
–LLDP
–Syslog
–DHCP options 66/67
–TFTP
•The following protocols provide secure alternatives:
–SNMPv1/v2c →SNMPv3
Check whether use of SNMPv1/v2c is necessary. SNMPv1/v2c is classified as
non-secure. Use the option of preventing write access. The product provides you
with suitable setting options.
If SNMP is enabled, change the community names. If no unrestricted access is
necessary, restrict access with SNMP.
Use SNMPv3 in conjunction with passwords.
–HTTP →HTTPS
–Telnet →SSH
–TFTP →SFTP
•Use secure protocols when access to the device is not prevented by physical
protection measures.
•To prevent unauthorized access to the device or network, take suitable protective
measures against non-secure protocols.
•If you require non-secure protocols and services, operate the device only within a
protected network area.
•Restrict the services and protocols available to the outside to a minimum.
•For the DCP function, enable the "Read Only" mode after commissioning.
List of available services
The following is a list of all available services and their ports through which the device
can be accessed.
The table includes the following columns:
•Service
The services that the device supports
•Default port status
This is the status of the port in the delivery state (factory setting).

Security recommendations
SCALANCE W778-1 /W738-1
10 Operating Instructions, 07/2020, C79000-G8976-C450-06
•Configurable port/service
Indicates whether the port number or the service can be configured via WBM / CLI.
•Authentication
Specifies whether the communication partner is authenticated.
If optional, the authentication can be configured as required.
•Encryption
Specifies whether the transfer is encrypted.
If optional, the encryption can be configured as required.
Service Protocol/port
number
Default port
status
Configurable
Authentication Encryption
Port
Service
DHCP client
UDP/68
Outgoing only
--
✓
--
--
DHCP server
UDP/67
Closed
--
✓
--
--
DNS client
TCP/53
UDP/53
Outgoing only
--
✓
--
--
EthernetIP
TCP/44818
UDP/2222
UDP/44818
Closed
--
✓
--
--
HTTP
TCP/80
Open
✓
✓
✓
--
HTTPS
TCP/443
Open
✓
✓
✓
✓
NTP Client
UDP/123
Outgoing only
✓
✓
--
--
PROFINET
UDP/34964
UDP/49154
UDP/49155
Open
--
✓
--
--
RADIUS
UDP/1812
Closed
✓
✓
✓
--
Remote Capture
TCP/2002
Closed
--
✓
--
--
SFTP client
TCP/22
Closed
✓
✓
✓
✓
SMTP client
TCP/25
Closed
✓
✓
--
--
SNMPv1/V2c
UDP/161
Open
✓
✓
--
--
SNMPv3
UDP/161
Open
✓
✓
Optional
Optional
SNMP traps
UDP/162
Outgoing only
--
✓
--
--
SNTP Client
UDP/123
Outgoing only
✓
✓
--
--
SSH
TCP/22
Open
✓
✓
✓
✓
Syslog Client
UDP/514
Closed
✓
✓
--
--
Syslog (secure) Client
TCP/6514
Closed
✓
✓
--
✓
Telnet
TCP/23
Open
✓
✓
✓
--
TFTP client
UDP/69
Closed
✓
✓
--
--
DCP
--
Open
--
✓
--
--
LLDP
--
Open
--
✓
--
--
RSTP
--
Open
--
✓
--
--
iPRP
--
Open
--
✓
--
--
MSTP
--
Closed
--
✓
--
--

Security recommendations
SCALANCE W778-1 /W738-1
Operating Instructions, 07/2020, C79000-G8976-C450-06 11
Service Protocol/port
number
Default port
status
Configurable
Authentication Encryption
Port
Service
IPv6
--
Closed
--
✓
--
--
SIMATIC NET TIME
--
Closed
--
✓
--
--

Security recommendations
SCALANCE W778-1 /W738-1
12 Operating Instructions, 07/2020, C79000-G8976-C450-06

SCALANCE W778-1 /W738-1
Operating Instructions, 07/2020, C79000-G8976-C450-06 13
Safety notices
3
Read the safety notices
Note the following safety notices. These relate to the entire working life of the device.
You should also read the safety notices relating to handling in the individual sections,
particularly in the sections "Installation" and "Connecting up".
WARNING
Hot surfaces
Electric devices have hot surfaces. Do not touch these surfaces. They could cause
severe burns.
•Allow the device to cool down before starting any work on it.
WARNING
The device is intended for indoor use only.
WARNING
Suitable cables at high ambient temperatures
If the temperature of the cable or housing socket exceeds 70 °C or the branching point
of conductors exceeds 80 °C, special precautions must be taken.
If the device is operated at ambient temperatures of between 50 °C and 70 °C, only
use cables with a maximum permitted operating temperature of at least 80 °C.
Safety notices on use in hazardous areas
General safety notices relating to protection against explosion
WARNING
EXPLOSION HAZARD
DO NOT OPEN WHEN ENERGIZED.

Safety notices
SCALANCE W778-1 /W738-1
14 Operating Instructions, 07/2020, C79000-G8976-C450-06
Safety notices when using the device according to Hazardous Locations (HazLoc)
and FM.
If you use the device under HazLoc or FM conditions you must also keep to the following
safety notices in addition to the general safety notices for protection against explosion:
This equipment is suitable for use in Class I, Division 2, Groups A, B, C and D or non-
hazardous locations only.
This equipment is suitable for use in Class I, Zone 2, Group IIC or non-hazardous
locations only.

SCALANCE W778-1 /W738-1
Operating Instructions, 07/2020, C79000-G8976-C450-06 15
Description of the device
4
4.1 Description of the device
W778-1 /W738-1 M12
①
LED display
②
Antenna connector R1A1
③
PLUG slot / RESET button
④
Antenna connector R1A2
⑤
Grounding
⑥
Connector for power supply (L1, L2)
⑦
Ethernet connector P1
⑧
Ethernet connector P2 (PoE capability)

Description of the device
4.1 Description of the device
SCALANCE W778-1 /W738-1
16 Operating Instructions, 07/2020, C79000-G8976-C450-06
Structure of the type designation
The type designation of the device is made up of several parts that have the following
meaning:
Components of the product
The following components are supplied with the product:
•SCALANCE W778 or SCALANCE W738
•3 protective caps for the M12 sockets
–2 x Ethernet
–1 x power supply
•2 protective caps for the antenna sockets
•SIMATIC NET Industrial Wireless LAN CD
Please check that the consignment you have received is complete. If the consignment is
incomplete, contact your supplier or your local Siemens office.
Note
The mounting ada
pter and the bracket for installation on a DIN rail does not ship with
the product, see
Accessories (Page 17).

Description of the device
4.2 Accessories
SCALANCE W778-1 /W738-1
Operating Instructions, 07/2020, C79000-G8976-C450-06 17
4.2 Accessories
Technical data subject to change.
You will find further information on the range of accessories in the Industry Mall
(https://mall.industry.siemens.com)
PLUG
Component
Description
Article number
C-PLUG
Configuration PLUG
Exchangeable storage medium for configuration
data.
256 MB
6GK1900-0AB10
KEY-PLUG fea-
tures
Enabling of iFeatures and exchangeable storage
medium for storage of configuration data
KEY-PLUG W780 iFeatures AP
6GK5907-8PA00
KEY-PLUG W740 iFeatures Client
6GK5907-4PA00
KEY-PLUG
W700 Security
W700 Security
Enabling of “Inter AP Blocking” and exchangeable
storage medium for storage of configuration data
6GK5907-0PA00
Installation
Component
Description
Article number
Mounting adapter
standard mount-
ing rail
Adapter for mounting the W778/W38 on a 35 mm
DIN rail according to DIN EN 50 022
6GK5798-8MF00-0AA1
Bracket support
Bracket support to install the device rotated
through 90°
For optimized cabinet installation.
6GK5798-8MA00-0AA1
M12 data plug-in connector
Component
Description
Article number
IE FC M12 PLUG
PRO 2x2
M12 data plug-in connector for
IE FC TP cables 2x2, IP65/67,
D-coded, axial cable outlet
1 connector per
package
6GK1901-0DB20-6AA0
8 connectors per
package
6GK1901-0DB20-6AA8

Description of the device
4.2 Accessories
SCALANCE W778-1 /W738-1
18 Operating Instructions, 07/2020, C79000-G8976-C450-06
4.2.1 Data line
Cables Industrial Ethernet
Component
Description
Article number
IE FC TP STANDARD
CABLE GP2X2
(PROFINET type A)
Standard bus cable, TP installation cable for
connection to FC OUTLET RJ-45, for universal
use, 4-wire, shielded, CAT 5E
Sold by the meter
6XV1840-2AH10
IE FC TP ROBUST
STANDARD CABLE GP
2X2
(PROFINET type A)
Standard bus cable, ATPE outer jacket for con-
nection to FC RJ-45 PLUG and FC OUTLET RJ-
45, fixed installation, for universal use, 4-wire,
shielded, CAT 5
Sold by the meter
6XV1841-2A
IE FC TP ROBUST
FLEXIBLE CABLE GP 2X2
(PROFINET type B)
Flexible bus cable, TPE outer jacket for connec-
tion to FC RJ-45 PLUG and FC OUTLET RJ-45,
flexible wires, 4-wire, shielded, CAT 5
Sold by the meter
6XV1841-2B
IE FC TP FLEXIBLE
CABLE GP 2X2
(PROFINET type B)
Flexible bus cable, TP installation cable, flexible
wires, shielded, CAT 5
Sold by the meter
6XV1870-2B
IE FC TP TRAILING
CABLE 2X2
(PROFINET type C)
Highly flexible bus cable, TP installation cable
for connection to FC OUTLET RJ-45, for use in
drag chains, 4-wire, shielded, CAT 5
Sold by the meter
6XV1840-3AH10
IE TP TORSION CABLE
2X2
(PROFINET type C)
Highly flexible bus cable, TP installation cable
for use in highly flexible applications (torsion),
4-wire
Sold by the meter
6XV1870-2F
IE CONNECTING CABLE
M12-180/IE RJ45
Flexible IE connecting cable, 4-wire, preassem-
bled with a 4-pin M12 plug (D-coded) and an IE
FC RJ-45 plug 145
6XV1871-5T*
IE CONNECTING CABLE
M12-180/M12-180
Flexible IE connecting cable, 4-wire, preassem-
bled with two 4-pin M12 plugs (D-coded)
6XV1870-8A*
* Available in different lengths
Cabinet feedthrough
Component
Description
Article number
IE M12 PANEL
FEEDTHROUGH
Cabinet feedthrough for conversion from M12
connector technology (D-coded, IP65) to RJ-45
connector technology (IP20)
pack of 5
6GK1901-0DM20-2AA5
IE M12 PANEL
FEEDTHROUGH
PRO
Cabinet feedthrough for conversion from M12
connector technology (D-coded, IP65) to M12
connector technology (D-coded, IP65)
pack of 5
6GK1901-0DM30-2AA5

Description of the device
4.2 Accessories
SCALANCE W778-1 /W738-1
Operating Instructions, 07/2020, C79000-G8976-C450-06 19
Component
Description
Article number
IE M12 PANEL
FEEDTHROUGH
4X2
Cabinet feedthrough for conversion from M12
connector technology (X-coded, IP65/67) to
RJ-45 connector technology (X-coded, IP20)
pack of 5
6GK1901-0DM40-2AA5
N-Connect/N-
Connect fe-
male/female Panel
Feedthrough
Panel feedthrough for wall thicknesses up to a
maximum of 4.5 mm, two N-Connect female
connectors.
6GK5798-2PP00-2AA6
N-Connect/SMA-
Connect fe-
male/female Panel
Feedthrough
Panel feedthrough for wall thicknesses up to a
maximum of 5.5 mm, two N-Connect/SMA
female connectors.
6GK5798-0PT00-2AA6
See also
Safety when connecting up (Page 39)
Energy cable
Component
Description
Article number
Energy cable 2 x
0.75
Energy cable for connection of signaling con-
tact and power supply 24 VDC, stranded wire 2
x 0.75 mm2, trailing type, not assembled
Sold by the meter
6XV1812-8A
Robust Energy Ca-
ble 4 x 0.75
Energy cable for connection of power supply 24
VDC, 4-wire stranded 4 x 0.75 mm2, robust,
flexible, not assembled
Sold by the meter
6XV1801-2A
M12 PLUG-IN
CABLE
Flexible plug-in power cable to connect the
power supply 24 VDC, 4-wire, preassembled
with a 4-pin M12 plug and an M12 socket (A-
coded)
6XV1801-5D*
* Available in different lengths
Socket
Component
Description
Article number
IE POWER M12
CABLE
CONNECTOR PRO
Socket for the 24 VDC power supply. 4-pin, A-
coded
pack of 3
6GK1907-0DC10-6AA3

Description of the device
4.2 Accessories
SCALANCE W778-1 /W738-1
20 Operating Instructions, 07/2020, C79000-G8976-C450-06
Lightning protection
Component
Description
Article number
LP798-1N
Lighting protector with N/N female/female connect-
or with gas discharge technology
6GK5798-2LP00-2AA6
LP798-2N
Lighting protector with N/N female/female connect-
or with quarter wave technology
6GK5798-2LP10-2AA6
Terminating resistor
Component
Description
Article number
TI795-1N
Electrical connection
N-Connect, male
Pack of 1
6GK5795-1TN00-1AA0
4.2.2 Flexible connecting cables and antennas
4.2.2.1 Flexible connecting cables
Flexible connecting cable N-Connect/R-SMA
Flexible connecting cable for connecting an antenna to a SCALANCE W device with R-
SMA connectors, preassembled with a connector N-male and R-SMA male
Length
Article number
0.3 m
6XV1875-5CE30
1 m
6XV1875-5CH10
2 m
6XV1875-5CH20
5 m
6XV1875-5CH50
10 m
6XV1875-5CN10
For railway applications, the following connecting cable are available:
Length
Article number
1 m
6XV1875-5TH10
2 m
6XV1875-5TH20
5 m
6XV1875-5TH50