
7
ASSEMBLY OF THE UNIT
Your fan assembly includes a metal clip with fan
bracket to enable you to adjust your fan to an
ideal cooling angle.
Before using, there is some assembly required
as follows:
1. Remove vertical angle adjustment knob, if
attached.
2. Position fan bracket over fan neck, lining up
holes in the fan bracket with those on the
fan neck.
3. Place vertical angle adjustment knob
through the holes lined up in Step 2.
4. The vertical angle adjustment knob must go
through on the side with the round opening.
5. Place the locking nut over the vertical angle
adjustment knob so that the nut ts rmly
on the side with the 6-sided (hexagonal)
opening.
6. Tighten the vertical angle adjustment knob.
Note: Once the nut is in position (on the side of
the clip neck that has the
6-sided opening) it is not necessary to hold the
nut while turning the vertical
angle adjustment knob.
USING YOUR APPLIANCE:
1. Plug into electrical wall outlet.
2. Clip the fan in the desired location.
3. Adjust the direction of the airow as
desired.
4. Switch the speed control to the preferred
position.
Note: examples of placement:
CLEANING AND CARE
• Before cleaning always switch o the
appliance and remove the plug from the
electrical socket.
• To clean the outside of the fan, wipe the
exterior with a soft, damp cloth.
• Never use an abrasive cleaner.
• When not in use, store the fan (preferably
in its original box) in a cool, clean and dry
location.
WARNING:
DO NOT IMMERSE ANY PART OF THE
APPLIANCE IN WATER
DISPOSAL OF THE UNIT
Appliances bearing the symbol shown
here may not be disposed of in domestic
rubbish. You are required to dispose of old
electrical and electronic appliances like this
separately.
Please visit www.recycle-more.co.uk or
www.recyclenow.co.uk
for access to information about the
recycling of electrical items.
Please visit www.weeeireland.ie for access
to information about the recycling of
electrical items purchased in Ireland.
The WEEE directive, introduced in August
2006, states that all electrical items must
be recycled, rather than taken to landll.
Please arrange to take this appliance to
your local Civic Amenity site for recycling,
once it has reached the end of its life.
Motor Housing
Fan Neck
Vertical Angle
Adjustment Knob Round
Opening
Fan
Bracket
6-sided
Opening
Locking
Nut