Signode PSD-109 User manual

TIR: 2015-409
ENGINEERED PRODUCTS TECHNICAL INFORMATION RELEASE
(POWER STRAPPING MACHINE DIVISION)
Page 1
©2015 SIGNODE SPD1824 07-29-15
This Technical Information Release concerns a eld repair program that involves the addition of a
guard and safety labelling onto the PSD 109 and 119 strapping dispensers.
DATE: May 1, 2015
PRODUCT: Models PSD-109 and PSD-119 Strapping Dispensers.
DOES NOT INCLUDE the PSD-119 J and SJ Jumbo Coil Dispensers.
MANUFACTURERS: Signode, Signode Canada, Acme Packaging, Fleetwood and Cyklop.
TECHNICAL ISSUE ADDRESSED
There is a possible crush point on both the PSD-109 and PSD-119 strapping dispensers where the
dancer arm comes into close proximity to the dispenser’s “positive stop” area. A guard has been
designed to cover the possible crush point.
RECOMMENDED SOLUTION: Add Internal Warning Sign 611298, Dispenser Guard 611299 and
External Warning Sign 510486.
PSD-109 PSD-119
DISPENSER GUARD
Part Number: 611299
Dispenser guard fits
both left hand & right
hand dispensers.
INTERNAL
WARNING SIGN
MOUNTED TO POST
Part Number:
611298
EXTERNAL
WARNING SIGN
MOUNTED ON GUARD
Part Number:
510486

TIR: 2015-409
ENGINEERED PRODUCTS TECHNICAL INFORMATION RELEASE
(POWER STRAPPING MACHINE DIVISION)
Page 2
©2015 SIGNODE SPD1824 07-29-15
1. Before installing the guard, follow your plant's lockout/tagout procedures for securing and
isolating all power sources to the dispenser.
2. Attach internal warning sign as shown on guard side of post. Subsequently, the guard will cover
sign.
3. Using two (2) 9/16" wrenches, loosen (DO NOT REMOVE) the hex head bolt.
4. Slide guard into place and re-tighten the bolt.
Hex head bolt with
flat washer
Locknut
4" to 4-1/2"
Hex head
bolt with
flat washer
will be
positioned
outside
the guard
Locknut
will be
positioned
inside the
guard
DISPENSER GUARD INSTALLATION (ESTIMATED INSTALLATION TIME - 15 MINUTES)
PSD-109 & PSD-119 DISPENSERS:

TIR: 2015-409
ENGINEERED PRODUCTS TECHNICAL INFORMATION RELEASE
(POWER STRAPPING MACHINE DIVISION)
Page 3
©2015 SIGNODE SPD1824 07-29-15
DISPENSER GUARD INSTALLATION (ESTIMATED INSTALLATION TIME - 15 MINUTES)
PSD-109 & PSD-119 DISPENSERS:
5. Attach external warning sign as shown.
6. Conrm that equipment is "all clear" and then reconnect power in accordance with the plant's
lockout/tagout procedures.
DISPENSER GUARD INSTALLATION (ESTIMATED INSTALLATION TIME - 15 MINUTES)
PSD-109 & PSD-119 DISPENSERS (Continued):