SIIG CE-H27611-S1 User manual

Features
• Support HDCP 1.3
• Build-in EDID, resolution up to 1080p@60Hz
• HDMI wireless transmission distance up to
656ft/200m. (In an open environment
without Wi-Fi interference.)
• Support one transmitter and multiple
receivers, up to 4 receivers.
• Support one-way IR extend
• Support PCM 2ch audio
• 5G Wireless connectivity
Package contents
1. Wireless HDMI Transmitter
2. Wireless HDMI Receiver
3. Power adapter 12V/1A x2
4. 5G WiFi antenna x4
5. IR Emitter Cable (For TX IR out)
6. IR Receiver Cable (For RX IR in)
7. Quick start guide
Layout
1. DC Power jack:
connect to power adapter DC 12V/1A
2. Power LED:
3. RESET: Restore factory settings after long
press for 5s, and require to pair again
4. HDMI In: Connect to HDMI source
5. Loop Out: Connect to HDMI display
6. IR Out: Connect to IR Emitter Cable
Transmitter
Receiver
1. DC Power jack:
connect to power adapter DC 12V/1A
2. Power LED:
3. RESET: Restore factory settings after long
press for 5s, and require to pair again
4. HDMI Out: Connect to HDMI display
5. IR In: Connect to IR Receiver Cable
1 2 3 4 5
6
1 2 3 4
5

Full HD Wireless HDMI
Extender with Loopout & IR Kit
Quick Start Guide
04-1368A P/N: CE-H27611-S1
Support
For more info or tech support
http://www.siig.com/support
Dec, 2021 Copyright © 2021 by SIIG, Inc. All rights reserved.
Dear Valued Customer
WE REALLY
APPRECIATE
YOUR PURCHASE
~thank you~
Pairing Instruction
Pairing Method:
1. Power on the TX & RX
2. Wait for 30 sec
3. Connect HDMI cable to TX input and RX
output
4. Wait for 10 sec
5. Remove the HDMI cable, then re-plug the
power to restart the TX & RX
Application