SIIG 04-1404A User manual

4K60Hz HDMI over Cat6
Extender with Loopout & IR - 50m
Quick Start Guide
04-1404A P/N: CE-H27K11-S1
Dec, 2022 Copyright © 2022 by SIIG, Inc. All rights reserved.
Support
For more info or tech support
http://www.siig.com/support
Dear Valued Customer
WE REALLY
APPRECIATE
YOUR PURCHASE
~thank you~
EDID Auto Balance
• The extender will auto-learning connected
display’s EDID from RX, for resolution &
audio output channel
• If TX loop-out also connected display, the
extender will use the smaller display EDID
of two displays
For example:
1. Two displays are 4K@60Hz 2 audio channels
& 1080p@60Hz 5.1 audio channels, the
extender will use 1080p@60Hz 2 audio
channels EDID for Two displays
Output resolution will be 1080p@60Hz
Audio output will be 2 channels
2. Two displays are 4K@60Hz 7.1 audio channels,
the extender will use 4K@60Hz 7.1audio
channels EDID for Two displays
Output resolution will be 4K@60Hz
Audio output will be 7.1 channels
FAQ
Q: The devices are connected correctly, but
why is there no image displayed?
1. Please make sure the HDMI cable
meets the transmission requirement
2. Please check and make sure the
network cable is connected well
3. Restart the transmitter or receiver by
pressing the reset hole
Q: Why does the display occasionally have a
black screen?
1. Check if the length of the cable is within
  thespeciedrange
2. Reset the transmitter or receiver to
rebuild the connection
Q: Why is the display color abnormal or no
sound?
1. Reset the transmitter or receiver to
rebuild the connection
2. Check if the HDMI cables are connected well
3. Reconnect the network cable