Silvercrest SLR 30 A1 Product information sheet

AIR PURIFIER SLR 30 A1
IAN 359280_2007
AIR PURIFIER
Operating instructions and safety instructions
ΚΑΘΑΡΙΣΤΗΣ ΑΕΡΑ- ΙΟΝΙΣΤΗΣ
Οδηγίε χρήση και υποδείξει ασφαλεία
LUFTREINIGER
Bedienungsanleitung und Sicherheitshinweise

GB/CY Operating instructions and safety instructions Page 1
GR/CY Οδηγίε χρήση και υποδείξει ασφαλεία Σελίδα 19
DE/AT/CH Bedienungsanleitung und Sicherheitshinweise Seite 37
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
Πριν ξεκινήσετε την ανάγνωση, ανοίξτε τη σελίδα ε τι εικόνε και εξοικειωθείτε ε όλε τι λειτουργίε
τη συσκευή.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.

HighHigh
LowLow
SleepSleep
1h1h
2h2h
4h4h
8h8h
AutoAuto

GB│CY │1 ■
SLR 30 A1
Contents
Introduction ...................................................2
Information about these operating instructions .................................. 2
Copyright............................................................... 2
Proper use .............................................................. 2
Safety information .............................................3
Basic safety instructions .................................................... 5
Package contents and transport inspection .........................6
Appliance description ...........................................7
Handling and operation.........................................7
How the appliance works .................................................. 8
Ion function ............................................................. 8
Air quality indicator (illuminated ring) ......................................... 8
Button functions .......................................................... 9
Switching the appliance on/off .............................................. 9
Appliance functions ......................................................10
Cleaning and maintenance .....................................11
Cleaning the appliance ................................................... 11
Cleaning the particle sensor ............................................... 12
Replacing the filter.......................................................13
Ordering replacement parts ...............................................14
Storage .....................................................14
Troubleshooting ..............................................15
Disposal .....................................................16
Disposal of the appliance ................................................. 16
Disposal of the packaging................................................. 16
Appendix....................................................16
Technical data .......................................................... 16
Kompernass Handels GmbH warranty .......................................17
Service................................................................ 18
Importer ............................................................... 18

■ 2│GB│CY SLR 30 A1
Introduction
Information about these operating instructions
Congratulations on the purchase of your new appliance. You have
selected a high-quality product.
The operating instructions are part of this product. They contain
important information about safety, usage and disposal.
Before using the product, please familiarise yourself with all operating and safety
instructions. Use the product only as described and for the range of applications
specified. Please pass on all documents associated with this product to any future
owner.
Copyright
This documentation is protected by copyright.
Any copying or reproduction, including in the form of extracts, or any reproduction
of images (even in a modified state), is permitted only with the written authorisation
of the manufacturer.
Proper use
This appliance is designed exclusively for air purification in indoor rooms. It is
not intended for any other purpose nor for use beyond the scope described.
The appliance is not intended for use in commercial or industrial environments.
The manufacturer accepts no responsibility for damage caused by failure to
observe these instructions, improper use or repairs, unauthorised modifications
or the use of unapproved replacement parts. The operator bears sole liability.

GB│CY │3 ■
SLR 30 A1
Safety information
RISK OF ELECTRICAL SHOCK!
► Connect the appliance only to mains power sockets
supplying a mains power voltage of 220–240 V ∼, 50 Hz.
► Always pull on the plug to disconnect the appliance from
the mains. Do not pull on the cable itself.
► Do not kink or crush the power cable, and route the cable
so that it cannot be stepped on or tripped over.
► To avoid risks, arrange for defective plugs and/or power
cables to be replaced at once by qualified technicians or
our Customer Service Department.
► Ensure that the power cable does not become wet or damp
during use. Route the cable in such a way that it cannot be
caught or damaged.
► In case of a malfunction, remove the plug from the socket.
► Pull out the plug from the mains power socket before
cleaning the appliance or changing accessories.
► Operate the appliance only with dry hands and never
without shoes (i.e. not barefoot). This will help reduce the
effect of an electric shock in the event of a malfunction.
► Never immerse the appliance in water or other liquids.
Use the appliance only in indoor areas, not
outdoors.

■ 4│GB│CY SLR 30 A1
WARNING! RISK OF INJURY!
► Use only the original accessory parts recommended by the
manufacturer for this appliance.
► Only use the appliance when it is properly and completely
assembled.
► The appliance may not be used if it has been dropped, if
there are any obvious signs of physical damage or if it is
leaking.
► Always pull the plug out of the power socket during each
break in use, as well as after use and before any cleaning.
ATTENTION! PROPERTY DAMAGE!
► Do not insert any objects into the openings of the appliance.
► Do not use the appliance if the openings are blocked. Keep
the openings free of dirt, fluff, hairs or anything that could
impede the air circulation.
► Ensure that the appliance, the power cable and the plug do
not come into contact with heat sources such as hotplates or
naked flames.
► Never leave the appliance unattended during operation.

GB│CY │5 ■
SLR 30 A1
Basic safety instructions
To ensure safe operation of the appliance, follow the safety
guidelines set out below:
■ Check the appliance for visible external damage before
use. Do not operate an appliance that has been dam-
aged or dropped.
■ During operation, always keep windows and doors
closed so that the appliance can work effectively.
■ Do not operate the appliance in the proximity of highly
flammable gases or materials, near naked flames or in
areas prone to oil and water splashing.
■ This appliance may be used by children aged 8 years
and above and by persons with limited physical, senso-
ry or mental capabilities or lack of experience and knowl-
edge, provided that they are under supervision or have
been told how to use the appliance safely and are aware
of the potential risks. Do not allow children to play with
the appliance. Do not allow children to carry out cleaning
and user maintenance tasks unless they are supervised.
■ All repairs must be carried out by authorised specialist
companies or Customer Service. Improper repairs can
pose significant risks to the user.
■ This appliance should not be exposed to rain. Protect the
appliance from moisture and do not allow any liquids or
objects to get inside the housing. Do not place any liquid-
filled containers (e.g. flower vases) on the appliance.
The appliance could be irreparably damaged!
■ Do not place any heavy objects on the appliance.
■ Do not cover the appliance (e.g. with newspapers, cushions
or blankets).
■ Avoid direct sunlight.

■ 6│GB│CY SLR 30 A1
■ Do not place any naked flames, e.g. burning candles, on
or directly next to the appliance.
■ In the event of malfunctions – and during thunderstorms –
disconnect the plug from the mains power socket.
■ Set up the appliance on a solid, flat and dry surface so
that it cannot tip over.
■ Place the appliance at a minimum distance of 20 cm from
walls or other objects. A minimum distance of 50 cm must
be maintained above the appliance to ensure good air
circulation.
■ Use the appliance in rooms with a maximum area of
15m² and a maximum height of 2.4 m.
Package contents and transport inspection
ƇRemove all parts of the appliance and the operating instructions from the
carton.
ƇRemove all packaging materials and any films and labels.
ATTENTION! PROPERTY DAMAGE
► The filter 8inside the appliance is additionally packed in a plastic bag.
Before starting up the appliance, remove this plastic bag from the filter 8
(see section Changing the filter).
Check the contents of the package. The package contents include the following
components (see fold-out page for illustrations):
► Air purifier
► Filter (in the appliance)
► Operating instructions
NOTE
► Check the package for completeness and signs of visible damage.
► If the delivery is incomplete or damage has occurred as a result of
defective packaging or during transport, contact the Service hotline
(see section Service).

GB│CY │7 ■
SLR 30 A1
Appliance description
(See fold-out page for illustrations)
1Control panel
2Timer button
3Filter change button
4On/Off button
5Air outlets
6Housing
7Air inlets
8Filter
9Housing cover (underside of appliance)
0Power cable connection (rear of appliance)
qParticle sensor compartment cover (rear of appliance)
wIlluminated ring
eIon function button
rFan function button
Handling and operation
NOTE
► Never cover the ventilation openings, as this may cause the appliance to
overheat. When setting up the appliance, maintain a sufficient distance
from walls or other objects.
► Place the appliance on a firm, level and dry surface.
►The appliance is designed for use in rooms up to a maximum size of 15 m²
and with a maximum height of 2.4 m (maximum room volume: 36 m).
►The appliance may emit a slight plastic odour during first use. This will dis-
sipate after a certain period of operation. This smell is due to the materials
used in the manufacture of the appliance and is not harmful to health.

■ 8│GB│CY SLR 30 A1
How the appliance works
Inside the air purifier, there is a fan (ventilator) which draws the air in the room
into the appliance and then through a high-quality filter.
The filter cleans the air of particles such as house dust,
pollen, fungal spores, smoke etc., so that the amount of these
particles in the air is reduced. In addition, the activated
carbon filter contained in the filter ensures that odours in
the air are neutralised or reduced.
The appliance has a timer function for automatic switch-off
and a sleep mode for silent fan operation during the night.
The additional ion function allows efficient removal of dirt particles in the air, thus
improving indoor air quality.
Ion function
The ion function is used to electrically charge (ionise) particles (atoms or mole-
cules) contained in the air in the air purifier. These ions are then released into the
room air via the fan. As a result, airborne ions and particles with different charges
stick together. These particles sink more easily and can therefore no longer float
around in the room air.
Air quality indicator (illuminated ring)
There is an illuminated ring won the appliance's control panel 1, which uses
different colours to indicate the amount of dirt particles in the room air.
Depending on the quality of the room air, the illuminated ring wlights up in one
of the following colours:
Illuminated ring colour Air quality
Blue Good
Yellow Medium
Red Poor

GB│CY │9 ■
SLR 30 A1
Button functions
The following table explains the functions of the buttons on the appliance control
panel 1:
Button Function
Switch appliance on/off (standby mode)
Switch the ion function on/off
Select fan speed: Sleep/Low/High/Auto
Switch the timer function on/off
Select operating time (hours): 1 hr/2 hrs/4 hrs/8 hrs
The button lights up: The filter is used up and needs to be replaced
(see section Changing the filter)
Confirm filter change/reset filter timer
Switching the appliance on/off
ƇInsert the mains plug of the appliance into a mains socket. You will hear a beep
and all the buttons and indicators on the control panel 1will light up briefly. The
appliance is now in standby mode. In standby mode, the On/Off button 4
lights up continuously.
ƇBriefly press the On/Off button 4to switch the appliance on. You will hear a
beep and the active buttons and indicators on the control panel 1will light up.
ƇTo switch the appliance into standby mode, briefly press the On/Off button 4
again. You will hear a beep and all the buttons and indicators on the control
panel 1apart from the On/Off button 4switch off.

■ 10│GB│CY SLR 30 A1
Appliance functions
Ion function
ƇDuring operation, briefly press the ion function button e, to switch on the ion
function. The ion function button elights up.
ƇPress the ion function button eagain briefly to switch off the ion function.
The ion function button egoes out.
Fan function
The fan function of the appliance offers you the following setting options:
►Sleep
Minimum fan speed for virtually silent operation and minimum airflow.
The illuminated ring wis switched off in this setting.
►Low
Low fan speed for low air flow
►High
High fan speed for high air flow
►Auto
Automatic adjustment of the fan speed and thus the air flow rate depending
on the current air quality (see table below):
Air quality Fan speed Illuminated ring colour
Good Minimum Blue
Medium Low Yellow
Poor High Red
ƇIf necessary, briefly press the fan function button rseveral times during oper-
ation to select the desired setting (Sleep, Low, High, Auto). The selected setting is
displayed on the control panel 1and the fan function button rlights up.
NOTE
► The standard setting for the fan function is Auto.
► The ion function cannot be activated in the Sleep setting.

GB│CY │11 ■
SLR 30 A1
Timer function
You can use the timer function to set the operating time of the appliance to be-
tween 1, 2, 4 or 8 hours. After the set operating time has elapsed, the appliance
turns off automatically and switches to standby mode. To set the timer function,
proceed as follows:
ƇDuring operation, briefly press the timer button 2once to activate the timer
function. Then press the timer button 2briefly, several times if necessary, to
set the required operating time (1 hr, 2 hrs, 4 hrs, 8 hrs). The set operating time
is displayed on the control panel 1and the timer button 2lights up.
ƇTo deactivate the timer function, press the timer button 2briefly several times
(if necessary) during operation until the operating time display (1 hr, 2 hrs,
4hrs, 8 hrs) goes out and the timer button 2is no longer illuminated.
NOTE
► When the appliance is switched off, the last selected settings of all
functions are saved. These are then used when the appliance is switched
on again. If you disconnect the appliance from the power supply, the last
selected settings are deleted.
Cleaning and maintenance
Cleaning the appliance
RISK OF ELECTRICAL SHOCK!
► Switch the appliance off and pull out the mains plug before cleaning the
appliance!
ATTENTION! PROPERTY DAMAGE
► Do not use caustic, abrasive or solvent-based cleaning materials. These can
damage the surfaces of the appliance.
ƇClean the appliance with a dry or slightly moist cloth. For stubborn soiling, use
a little mild detergent on the dampened cloth.
ƇClean the ventilation openings carefully and regularly with a suitable soft brush
to remove dust and dirt.

■ 12│GB│CY SLR 30 A1
Cleaning the particle sensor
RISK OF ELECTRICAL SHOCK!
► Before cleaning the particle sensor, always switch off the appliance and
remove the mains plug from the socket!
NOTE
► Clean the particle sensor once a month when using the appliance in
continuous operation. If you only use the appliance occasionally, clean
the particle sensor after two months at the latest.
To clean the particle sensor, proceed as follows:
1. Switch off the appliance and pull out the mains plug.
2. Open the particle sensor compartment cover qon the back of the appliance
by placing your finger in the cover qopening (see fig. 1). Then pull the
cover qtowards you until it opens.
Fig. 1 Fig. 2
3. The lens of the particle sensor is located on the left (see fig. 2). Clean it with a
dry cotton swab or a soft, dry cloth.
4. Replace the cover q into the corresponding openings in the housing 6.
Press the cover q into the openings until the cover q audibly clicks into
the housing 6.

GB│CY │13 ■
SLR 30 A1
Replacing the filter
RISK OF ELECTRICAL SHOCK!
► Always switch off the appliance and unplug it from the mains before chang-
ing the filter!
NOTE
► The interval for a filter change is approx. 1500 operating hours.
► Information on ordering replacement filters can be found in the next section
Ordering spare parts.
When the filter 8has reached the end of its life and is used up, this is indicated
by the flashing of the filter change button 3. To change the filter 8and
replace it with a new filter 8, proceed as follows:
1. Switch off the appliance and pull out the mains plug.
2. Turn the appliance upside down to access the bottom of the unit.
3. Turn the housing cover 9on the bottom of the appliance a little way
anticlockwise in the OPEN direction to open it (see fig. 3). Then remove
the housing cover 9 from the appliance.
Fig. 3 Fig. 4
4. Remove the filter 8from the appliance and insert a new filter 8into the
appliance.
5. Replace the housing cover 9 onto the appliance. Pay attention to the recesses
on the edge of the lid opening.
6. Turn the housing cover 9clockwise a little way in the CLOSE direction un-
til it is closed (see fig. 4). Turn the appliance back over.
7. Press the filter change button 3for about 3 seconds to confirm the filter
change and reset the filter timer. You will hear a beep, the filter change button
3flashes three times and then goes out.

■ 14│GB│CY SLR 30 A1
Ordering replacement parts
You can order replacement parts for this product on the Internet at
www.kompernass.com.
Scan this QR code with your smartphone or tablet.
You can use this QR code to go directly to our web-
site www.kompernass.com to view and order the
available spare parts.
NOTE
► If you have problems with your online order, you can contact our service
centre by phone or e-mail (see section Service).
► Please always quote the article number (e.g. 123456_7890) when
ordering. You can find it on the title page of these operating instructions.
► Please note that online ordering of replacement parts is not possible for all
countries.
Storage
ƇDisconnect the appliance from the power supply by pulling the plug of the
switched-off appliance from the socket.
ƇStore the appliance in a dry and dust-free location out of direct sunlight.

GB│CY │15 ■
SLR 30 A1
Troubleshooting
The following table will help you to identify and rectify minor malfunctions. If the
solutions presented below do not resolve the problem, please contact Customer
Service (see section Service).
Fault Cause Remedy
The appliance will
not switch on/does
not react.
The appliance is not
switched on.
Make sure that the appliance is properly
connected to the power supply.
Press the On/Off button 4to switch
on the appliance.
The mains plug is not
plugged in. Insert the plug into a mains power socket.
The socket is not
supplying any power. Check the house mains fuse.
The appliance is
defective.
Switch off the appliance and pull out the
mains plug.
Contact Customer Service (see section
Service).
The colour of the il-
luminated ring w
does not change.
The particle sensor is
dirty.
Clean the particle sensor (see section
Cleaning the particle sensor).
The filter change
button 3is
flashing even
though the filter
has already been
changed.
The filter timer has not
been reset.
Press the filter change button 3for
about 3 seconds to reset the filter timer
(see section Changing the filter).

■ 16│GB│CY SLR 30 A1
Disposal
Disposal of the appliance
The adjacent symbol of a crossed-out wheelie bin means that this appliance is
subject to Directive 2012/19/EU.This directive states that the product may not
be disposed of in normal household waste at the end of its useful life, but must be
taken to a specially set-up collection point, recycling depot or disposal company.
This disposal is free of charge for the user. Protect the environ-
ment and dispose of this appliance properly.
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product.
Disposal of the packaging
The packaging materials have been selected for their environmental compatibility
and ease of disposal, and are therefore recyclable.
Dispose of packaging materials that are no longer needed in accordance with
applicable local regulations.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material com-
ponents for disposal if necessary. The packaging material is labelled with abbrevi-
ations (a) and numbers (b) with the following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites.
Appendix
Technical data
Power supply 220–240 V ∼ (AC), 50 Hz
Power consumption 30W
Protection class II/ (double insulation)

GB│CY │17 ■
SLR 30 A1
Kompernass Handels GmbH warranty
Dear Customer,
This appliance has a 3-year warranty valid from the date of purchase. If this product
has any faults, you, the buyer, have certain statutory rights. Your statutory rights
are not restricted in any way by the warranty described below.
Warranty conditions
The warranty period starts on the date of purchase. Please keep your receipt in a
safe place. This will be required as proof of purchase.
If any material or manufacturing fault occurs within three years of the date of pur-
chase of the product, we will either repair or replace the product for you or refund
the purchase price (at our discretion). This warranty service requires that you pres-
ent the defective appliance and the proof of purchase (receipt) within the three-
year warranty period, along with a brief written description of the fault and of
when it occurred.
If the defect is covered by the warranty, your product will either be repaired or
replaced by us. The repair or replacement of a product does not signify the be-
ginning of a new warranty period.
Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under the warranty. This
also applies to replaced and repaired components. Any damage and defects
present at the time of purchase must be reported immediately after unpacking. Re-
pairs carried out after expiry of the warranty period shall be subject to a fee.
Scope of the warranty
This appliance has been manufactured in accordance with strict quality guide-
lines and inspected meticulously prior to delivery.
The warranty covers material faults or production faults. The warranty does not
extend to product parts subject to normal wear and tear or to fragile parts which
could be considered as consumable parts such as switches, batteries or parts
made of glass.
The warranty does not apply if the product has been damaged, improperly used
or improperly maintained. The directions in the operating instructions for the
product regarding proper use of the product are to be strictly followed. Uses and
actions that are discouraged in the operating instructions or which are warned
against must be avoided.
This product is intended solely for private use and not for commercial purposes.
The warranty shall be deemed void in cases of misuse or improper handling, use
of force and modifications/ repairs which have not been carried out by one of
our authorised Service centres.