Silvercrest SBB 850 EDS A1 User manual

Read the safety instructions in the operating manual attentively before using the appliance for the
first time!
Concise Information
Quick Start
1. Pull the baking mould upward out of the appliance.
2. Place the kneading paddle on the drive shafts of the baking mould. Make sure that it is fixed
properly.
3. Place the ingredients for your recipe into the baking mould in the specified sequence. First add the
liquids, sugar and salt, then flour, adding the yeast as the last ingredient.
4. Place the baking mould back in the appliance. Ensure that it engages correctly.
5. Close the appliance lid.
6. Insert the power plug into the socket. A signal tone sounds and, in the display , the programme
number and duration for Programme 1 appears.
7. Select the programme you want with the button Select .
8. Select the level of browning required for your bread with the button Browning .
9. With the button "Bread Weight" select the weight of bread you would like.
10. You now have the opportunity to set the time for completion of the baking period with the function
button Timer .
Starting the Programme
• Start the programme with the button Start/Stop .
The programme will carry out the various operations automatically.
Ending the Programme
• To interrupt a Programme, briefly press the Start/Stop button , a signal tone sounds and the
time blinks.
• To end a Programme, press the button Start/Stop for 3 seconds, until a signal tone sounds.
• To switch the appliance off, remove the power plug from the wall socket.
When the baking process has been completed, 10 acoustic signals are sounded and the display
indicates 0:00.
IB_short_96769_SBB850A1_GB.qxd 21.01.2014 10:30 Uhr Seite 1

Control panel/Display
ID-Nr.: SBB 850 A1-01/14-V1





Display
Display for
selection of the weight (750 g, 1000 g, 1250 g)
the remaining baking time in minutes and the programmed time
the selected level of browning (Light , medium , dark , Rapid )
the selected Programme number
the Programme sequence
the addition of ingredients („ADD“)
Start/Stop
To Start/Stop the appliance or to delete a Timer function, press the Start/Stop button until a long
signal tone is heard.
 Level of browning (or Rapid modus)
Select the desired level of browning (light/medium/dark) or change into the Rapid modus (Rapid).
Press the button repeatedly until the arrow appears over the desired level of browning (or "Rapid").
The baking time alters itself dependant on the selected level of browning.
Timer ▼ ▲
Time-delayed baking.
Operation indicator lamp
The operation indicator lamp indicates with its glowing that a programme is currently running.
Bread weight
Select the bread weight ( 750 g / 1000 g / 1250 g).
Press the button repeatedly until the arrow appears under the desired weight.
 Programme selection (Menu)
Calling up the desired baking programme. In the display appears the Programmme Number and
the relevant baking time.






IB_short_96769_SBB850A1_GB.qxd 21.01.2014 10:30 Uhr Seite 2