Silvercrest SBB850F2-11 User manual

Quick guide
Carefully read the safety instructions in the operating manual before using the appliance for
the first time!
Operating the appliance
1) Pull the baking tin 8upwards and out of the appliance.
2) Push the kneading blades 7onto the drive shafts in the baking tin 8. Ensure that they are
fixed firmly in place.
3) Place the ingredients for your recipe into the baking tin 8in the specified sequence. As a
rule, you should add the liquids first, followed by sugar, salt and flour and finally the yeast.
4) Replace the baking tin 8in the breadmaker. Ensure that it clicks into place properly.
5) Close the lid 2.
6) Insert the mains plug into the socket.
7) Switch the appliance on using the On/Off switch (0/ l) 5. You will hear a beep and
the display Awill show the programme number e and time b for the programme 1.
Starting a programme
1) Select the desired programme using the programme selector button G.
2) Select the required bread weight a with button F.
3) Select the desired browning level d using button C.
4) Set the timer using the arrow buttons Dor start the programme immediately with the
Start/Stop button B.
Pausing/stopping the programme
■ To pause the programme, briefly press the Start/Stop button B, the time indicator b will
flash on the display A. Press the Start/Stop button Bagain to resume the programme.
■ If the programme ends automatically, you will hear several beeps and the time indicator b
will display 0:00. The appliance will switch to warming mode for 60 minutes.
■ To end the programme or warming mode prematurely, press and hold down the Start/Stop
button B until you hear a long beep.
Switching the appliance off
■ Once you have finished using the appliance, switch it off using the On/Off switch
(0/ l) 5and pull the mains plug out of the mains socket.
GB
IB_360597_SBB850F2_short_GB.indd 1IB_360597_SBB850F2_short_GB.indd 1 23.11.2020 13:24:2623.11.2020 13:24:26

Control panel/display
A Display
aWeight selection (1000 g / 1250 g/1500 g)
bRemaining programme time in hours /programmed timer/ programmed phase time
(programme 16)
cRemove function – while "RMV" (= "Remove") is displayed, the kneading blades 7 can
be removed.
dSelected browning level/quick mode (light , medium , dark , quick )
eActive programme number
fActive programme phase
gAdd function– while "ADD" is displayed, further ingredients can be added to the dough.
BStart/Stop button
Button for starting, stopping or pausing a programme.
CSelect browning level/quick mode
Button for selecting the browning level or quick mode (light/medium/dark/quick).
Press the button repeatedly until the arrow d appears above the desired browning level.
Or activate quick mode to speed up the baking process.
DSetting the timer
Buttons for setting the timer for time-delayed baking.
EOperating light
The operating light Eindicates whether a programme is currently active.
FSet bread weight
Button for selecting the bread weight (1000 g / 1250 g / 1500 g).
Press the button repeatedly until the arrow a appears below the desired weight.
GSelect programme
Button to select the desired programme (1–16). The display Ashows the programme
number eand time b.
ID-No.: SBB850F2-11/20-V1
GB
RMV
ac
g
f e d
b
1. Regular
2. French
3. Whole-wheat
4. Sweet
5. Low carb
6. Gluten-free
7. Express
8. Cake
9. Kneading
10. Dough
11. Pasta-dough
12. Pizza-dough
13. Yoghurt
14. Jam
15. Bake
16. Homemade
GFEDCB
A
IB_360597_SBB850F2_short_GB.indd 2IB_360597_SBB850F2_short_GB.indd 2 23.11.2020 13:24:4623.11.2020 13:24:46