Silvercrest SKM 10 A1 Instruction sheet

V 1.3
English ...................................................2
Polski...................................................17
Magyar................................................33
Čeština.................................................48
Slovensky............................................62
Deutsch ................................................77

SilverCrest SKM 10 B1
2 - English
Contents
Introduction............................................. 3
Intended use ........................................... 3
Package contents .................................... 4
Technical specifications............................ 5
Safety instructions ................................... 6
Getting started ...................................... 11
Using the headphones .........................................11
Replacing the ear pads........................................11
Troubleshooting .................................... 12
Servicing ............................................... 13
Cleaning ................................................ 13
Environmental information.................... 13
Conformity notes................................... 14
Warranty .............................................. 15

SilverCrest SKM 10 B1
English - 3
Introduction
Thank you for choosing a SilverCrest product. Please
read the following pages for instructions on how to
use your product.
Intended use
This device is a consumer electronics device. It has
been designed to play music. It is suitable only for
private use, not for industrial or commercial
purposes. The device is also not suitable for use in
tropical climates. The manufacturer is not liable for
any damage or problems caused by unauthorised
modifications. Please observe the regulations and
laws in the country of use.

SilverCrest SKM 10 B1
4 - English
Package contents
SilverCrest SKM 10 B1 headphones
Ear pad (medium), fitted
Ear pad (large)
Ear pad (small)
These operating instructions
Remove the headphones and all the accessories
from the packaging. Remove the packaging material
and check whether all the components are complete
and undamaged. If you find anything missing or
damaged, please contact the manufacturer.
These operating instructions have a fold-out cover.
On the inside of the cover is a diagram of the
headphones with the components numbered. The
meanings of the numbers are as follows:
1 Ear pad (medium)
2 3.5 mm jack
3 Ear pad (large)
4 Ear pad (small)

SilverCrest SKM 10 B1
English - 5
The SilverCrest SKM 10 B1 headphones are
available in eight different designs. The only
difference is the styling of the earphones. Setup,
operation, etc. is identical for all of them. Figure A
shows the different designs available.
Technical specifications
Impedance 32 Ohm +/
-
4 Ohm
Sensitivity 105 dB (A) +/
-
10%
at 1 kHz
Frequency range 20 Hz
-
20 kHz
Broadband
characteristics
voltage
approx. 100 mV +/
-
20%
Connector 3.5 mm jack
Cable length approx. 120 cm
Weight approx. 12 g*1,2,6,7,8
approx. 14 g*3,5
approx. 18 g*4
Operating
temperature
5°C to 35°C
Storage
temperature
-
10°C to 50°C
Humidity max. 85% rel. humidit
y

SilverCrest SKM 10 B1
6 - English
The technical specifications and design can be
changed without prior notice.
* Depends on the design: 1 = star, 2 = pig,
3 = frog, 4 = volume adjustment, 5 = ladybird,
6 = penguin, 7 = bird, 8 = basket ball
Safety instructions
Before you use these headphones for the first time,
please read the following notes and heed all
warnings, even if you are familiar with handling
electronic devices. Keep this manual in a safe place
for future reference. If you sell the headphones or
pass them on, it is essential that you also hand over
this manual, as it is part of the product.
DANGER! This symbol and the
word “Danger” alert you to a
potentially dangerous situation.
Ignoring it can lead to severe injury
or even death.

SilverCrest SKM 10 B1
English - 7
WARNING! This symbol and the
word “Warning” denote important
information required for the safe
operation of the product and for the
safety of its users.
WARNING! Make sure that:
the device is not exposed to direct heat sources
(e.g. radiators)
the device is not exposed to direct sunlight or
bright artificial light
contact with spraying or dripping water or
aggressive fluids is avoided and the device is
never operated near water, the device is never
submerged (do not place any items containing
liquids, such as drinks, vases, etc. on or near the
device).
the device is never placed near magnetic fields
(e.g. speakers)

SilverCrest SKM 10 B1
8 - English
no naked flames (e.g. burning candles) are placed
on or near the device
no foreign bodies can penetrate into the device
the device is not subjected to excessive shocks or
vibrations
you always hold cables by the plug and never pull
on the cable itself. Never put heavy objects or
furniture on the cable and make sure the cable
does not get trapped, especially at the plug. To
avoid damaging it, never lead the cable around
hot or sharp objects or edges. Never tie knots in
the cable and do not tie it to other cables. The
cable must be laid so that nobody can trip over it
or be obstructed by it.
DANGER! Children and
people with disabilities
Electrical devices are not suitable for children.
Children may not understand that they can be
dangerous. Persons with reduced physical, sensory

SilverCrest SKM 10 B1
English - 9
or mental capabilities should also only use electrical
devices in appropriate circumstances. Never allow
children use electrical devices unsupervised, unless
they are instructed accordingly or supervised by a
competent person responsible for their safety.
Children should always be supervised to ensure that
they do not play with the product. Small parts can
represent choking hazards. Keep the packaging
away from children and people with
disabilities.
DANGER! Danger of
suffocation!
Caution! The headphones
and packaging material are
no toys!

SilverCrest SKM 10 B1
10 - English
Risks associated with excessive volume
levels
Be careful when using headphones.
Listening to high volume audio can
damage the hearing.
Do not use the headphones at high volume levels,
this could damage your hearing and possibly disturb
other people. Although the device is designed to
enable you to hear external noise, never turn the
volume up so high that you cannot hear what is
going on around you. Please note that ambient noise
can be perceived in a different and unfamiliar way.
In dangerous situations (for example when driving a
vehicle or when working with machines or other
situations that require your full attention), the sound
may distract your attention or prevent you from being
aware of what is happening around you. You should
not use the device in these situations.

SilverCrest SKM 10 B1
English - 11
Getting started
Using the headphones
WARNING! Set the volume of the
playback device to the lowest level
before connecting the headphones in
order to avoid damaging your
hearing. You can then set the volume
to the level you want.
You can use the headphones with playback devices
that have a 3.5 mm jack. Plug the 3.5 mm jack-type
connector [2] into the corresponding jack on your
playback device. Set the volume you want on the
playback device.
Use the earpiece labelled "L" in your left ear and the
earpiece labelled "R" in your right one.
Replacing the ear pads
The medium ear pads [1] are fitted by default. If the
ear pads do not fit correctly, you can replace them.
Proceed as follows:

SilverCrest SKM 10 B1
12 - English
Carefully pull the ear pads off the earpiece by
using your fingers.
Select either the (large) [3] or (small) [4] ear pads
and push them over the earpiece until they slide
into the recess.
Troubleshooting
No sound
Check the volume set on the playback device.
Increase the volume and/or start playback.
Make sure that the 3.5 mm jack-type connector [2]
is properly inserted into the audio jack.
Sound output on one side only
Check the stereo balance setting on the playback
device.
Make sure that the 3.5 mm jack-type connector [2]
is properly inserted into the audio jack.

SilverCrest SKM 10 B1
English - 13
Servicing
The device does not contain any parts that require
maintenance. Do not attempt to open the housing of
the device, this will void your warranty.
Cleaning
To clean the headphones use a slightly damp cloth.
Never use any solvents or cleaners that may
damage the plastic. Make sure that no liquid gets
into the housing.
To clean the ear pads, remove them. Clean the ear
pads under running water. Dry the ear pads
properly. Once the ear pads are completely dry, put
them back on the earpieces.
Environmental information
The product bears the symbol of a
rubbish bin crossed out. This means it is
subject to European Directive
2012/19/EU.

SilverCrest SKM 10 B1
14 - English
All electrical and electronic devices must be
disposed of separately from household waste at
official disposal centres. Proper disposal of the
device prevents damage to the environment or your
health. For further information about proper disposal,
contact your local council, recycling centre or the
shop where you bought the device. Dispose of all
packaging in an environmentally-friendly manner.
Cardboard packaging can be taken to paper
recycling centres or public collection points for
recycling. Any film or plastic contained in the
packaging should be taken to your public collection
points for disposal.
Conformity notes
This device complies with the basic and
other relevant requirements of RoHS
Directive 2011/65/EU. The corresponding
Declaration of Conformity can be found at the end
of this User Manual.

SilverCrest SKM 10 B1
English - 15
Warranty
Warranty of TARGA GmbH
This device is sold with three years warranty from the
date of purchase. Please keep the original receipt in
a safe place as proof of purchase. Before using your
product for the first time, please read the enclosed
documentation. Should any problems arise which
cannot be solved in this way, please call our hotline.
Please have the article number and, if available, the
serial number to hand for all enquiries. If it is not
possible to solve the problem on the phone, our
hotline support staff will initiate further servicing
procedures depending on the fault. Within the
warranty period the product will be repaired or
replaced free of charge as we deem appropriate.
No new warranty period commences if the product
is repaired or replaced. Consumables such as
batteries, rechargeable batteries and lamps are not
covered by the warranty.
Your statutory rights towards the seller are not
affected or restricted by this warranty.

SilverCrest SKM 10 B1
16 - English
Service
Phone: 0207 – 36 50 744
E-Mail: [email protected]
Phone: 01 – 242 15 83
E-Mail: [email protected]
Phone: 800 – 62 175
E-Mail: [email protected]
Phone: 800 – 92 496
E-Mail: [email protected]
IAN: 114042
Manufacturer
T
ARGA GmbH
Coesterweg 45
59494 SOEST
GERMANY

SilverCrest SKM 10 B1
Polski - 17
Spis treści
Wprowadzenie...................................... 18
Użytkowanie zgodne z przeznaczeniem18
Zawartość opakowania ........................ 19
Dane techniczne..................................... 20
Instrukcje bezpieczeństwa..................... 21
Pierwsze kroki....................................... 26
Użytkowanie słuchawek.......................................26
Wymiana nakładek ..............................................27
Rozwiązywanie problemów .................27
Serwisowanie........................................ 28
Czyszczenie ........................................... 28
Informacja środowiskowa..................... 29
Zgodność z dyrektywami ...................... 30
Gwarancja............................................. 31

SilverCrest SKM 10 B1
18 - Polski
Wprowadzenie
Dziękujemy za zakup produktu SilverCrest. Niniejsza
instrukcja zawiera informacje o tym, jak korzystać z
tego produktu. Prosimy zapoznać się z nią.
Użytkowanie zgodne z
przeznaczeniem
Opisywane urządzenie jest urządzeniem
elektronicznym klasy konsumenckiej. Zostało
zaprojektowane do odtwarzania muzyki. Nadaje się
wyłącznie do użytku prywatnego, a nie
przemysłowego bądź komercyjnego. Urządzenia
nie można ponadto używać w klimacie tropikalnym.
Producent nie ponosi odpowiedzialności za
jakiekolwiek szkody lub problemy spowodowanie
nieautoryzowanymi modyfikacjami. Przestrzegać
przepisów obowiązujących w kraju, w którym
urządzenie jest użytkowane.