Silvercrest OM1008-SL User manual

Multimedia Wireless Mouse
with 8 buttons
Trådlös mus för multimediabruk
med 8 knappar
Bruksanvisning och
serviceinformation
SE
Multimedia-radiostyret mus
med 8 taster
Brugervejledning og
serviceinformation
DK
Langaton multimediahiiri
8 painiketta
Käyttöopas ja huolto-ohjeet
FI
Multimedia Wireless Mouse
with 8 buttons
User manual and service
information
GB
IE
OM1008-SL

Wireless Mouse OM1008-SL
English - 1
Overview
1 800/1600 cpi toggle switch (press briefly)
Standard / media mode toggle switch
(keep pressed for 3 seconds)
2 Tilt wheel (4-way scroll wheel)
Volume control and mute (media mode)
3 Right mouse button
4 Left mouse button
5 Battery level indicator
6 Forward (default)
Next title (media mode)
7 Back (default)
Previous title (media mode)
8 Zoom + (default mode)
Launch Media Player (media mode)
9 Zoom - (default mode)
Play / Pause (media mode)

Wireless Mouse OM1008-SL
English - 2
Table of Contents
Overview...........................................................................................1
Important Safety Instructions............................................................4
Intended Use................................................................................ 5
Operating Environment ................................................................6
Children and Persons with Disabilities......................................... 7
Batteries....................................................................................... 7
RF Interface.................................................................................. 7
Repair and Maintenance.............................................................. 9
Copyright...................................................................................... 9
Storing When Not Using the Product ...........................................9
Conformity Notice....................................................................... 10
Disposal of Old Devices............................................................. 10
Package Contents...........................................................................11
Introduction.....................................................................................12
System Requirements.....................................................................12
Installing Hardware.........................................................................13
Inserting the Battery................................................................... 13
Connecting the USB Nano Receiver.......................................... 15
Installing the Software.....................................................................16

Wireless Mouse OM1008-SL
English - 3
Operation........................................................................................19
Changing the Operating Mode....................................................19
Configuration ..............................................................................19
Appendix ........................................................................................22
Troubleshooting..........................................................................22
Technical Specifications.............................................................23
Warranty Information......................................................................24

Wireless Mouse OM1008-SL
English - 4
Important Safety Instructions
Before you use this device for the first time, please read the
following notes in this manual and heed all warnings, even if you
are familiar with handling electronic devices. Keep this manual safe
for future reference. If you sell the device or pass it on, it is essential
that you also hand over this manual.
This icon denotes important information for the safe
operation of the product and for the user’s safety.
This icon alerts about a strong light source.
This symbol denotes further information on the topic.

Wireless Mouse OM1008-SL
English - 5
Warning: LED Radiation! LED Class 1
Avoid damage to your eyes! Never look into the LED beam. Never
point the LED beam directly at people or animals!
Intended Use
This wireless mouse, consisting of an optical mouse and USB nano
receiver, is an IT device. The device may not be used outdoors or in
tropical climates. This product has not been designed for corporate
or commercial (e.g. office) applications. Use the product in domestic
environments for private applications only. This device fulfils all
conformity-relevant norms and standards. Any modifications to the
device may result in these directives no longer being met. The
manufacturer is not liable for any damage or interference resulting
from non-compliance with the instructions above. Only use the
accessories recommended by the manufacturer. Any use other than
that mentioned above does not correspond to the intended use.
If you are not using the device within the Republic of Germany, you
must observe the regulations and laws in the country of use.

Wireless Mouse OM1008-SL
English - 6
Operating Environment
Position the wireless mouse on a stable, even surface and do not
place any objects on the device. The device is not designed for use
in environments with high temperatures or humidity (e.g.
bathrooms), and must be kept free of dust. Operating temperature
and operating humidity: 5°C bis 40°C, max. 90% RH.
Always make sure that:
- no direct heat sources (e.g. radiators) can affect the device;
- the device is not exposed to direct sunlight or artificial light;
- contact with spray, dripping water and corrosive liquids is
avoided and the device is never operated near water; in
particular the device may never be immersed in liquids (do
not place any objects containing liquids, such as vases or
drinks, near the device);
- the device is never placed in the immediate vicinity of
magnetic fields (e.g. loudspeakers);
- no fire hazards (e.g. burning candles) are placed on or near
the device;
- no foreign bodies enter the device;
- the device is not subjected to extreme temperature changes;
- the device is not subjected to excessive shocks and
vibrations.

Wireless Mouse OM1008-SL
English - 7
Children and Persons with Disabilities
Electrical devices do not belong in the hands of children. People
with disabilities should only use electrical devices in appropriate
circumstances. Do not allow children or persons with disabilities to
use electrical devices when not under supervision. They may not
comprehend the presence of potential risks. Batteries and small
parts represent potential choking hazards. Keep the batteries in a
safe place. If a battery is swallowed, seek medical help
immediately. Keep the packaging away from children and persons
with disabilities too as there is danger of suffocation.
Batteries
Insert the battery with the correct polarity. Never try to recharge
normal batteries and under no circumstances throw them into fire.
Remove the battery if the device is not going to be used for a long
time. Improper use may cause explosions and danger to life.
RF Interface
Turn the device off when onboard an aircraft, in a hospital, in an
operating theatre or in the vicinity of medical electronic equipment.
The RF signals may interfere with the functionality of sensitive

Wireless Mouse OM1008-SL
English - 8
devices. Place the device at least 20 cm (8 inches) away from
pacemakers, as the RF signals may interfere with the functionality
of the pacemaker. The transmitted RF signals can cause
interference with hearing aids. Do not place the device with the
wireless adapter turned on near flammable gases or in a potentially
explosive area (e.g. a paint shop), as the transmitted RF signals
may cause explosions or fire. The range of the radio wave signals
depends on environmental conditions.
When data is transmitted via a wireless connection it may also be
received by unauthorized parties. Targa GmbH is not liable for any
interference caused to RF or TV signals through unauthorized
modification to this device. Furthermore, Targa does not assume
any liability for replacing any cables or devices that have not been
specifically approved by Targa GmbH. The user is solely
responsible and liable for troubleshooting any interference caused
by unauthorized modification of this device and for replacing
appliances.

Wireless Mouse OM1008-SL
English - 9
Repair and Maintenance
Repairs are required when this device has been damaged in any
way, for example when liquid has entered the product, when the
product has been exposed to rain or moisture, when the product
does not work normally or if the product has been dropped. If
smoke, unusual noises or smells are noticed, switch off the device
immediately. In these cases the device should no longer be used
and should be inspected by authorized service personnel. Please
contact qualified personnel when repair is needed. Never open the
housing of the device, or the accessories. Only use a clean, dry
cloth for cleaning. Never use any corrosive liquids.
Copyright
The entire content of this User’s Manual is copyrighted and is
provided to the reader for information purposes only. Copying data
and information without prior explicit written approval by the author
is strictly forbidden. This also applies to any commercial use of the
contents and information. All texts and diagrams are up-to-date as
per the date of print release.
Storing When Not Using the Product
When left unused for a long period of time, remove the battery from
the wireless mouse. Remove the USB nano receiver from your
computer’s USB port and insert it into the storage compartment of
the mouse. Please note that the USB nano receiver fits into the
storage compartment in only one direction, without the need to

Wireless Mouse OM1008-SL
English - 10
apply any force. Also make sure that the storage temperature is
maintained between 5 °C and 40 °C. The humidity must not exceed
90% RH.
Conformity Notice
The wireless mouse complies with the basic and other
relevant requirements of the R&TTE Directive
1999/5/EC. The corresponding Declaration of
Conformity can be found at the end of this User's
Manual.
Disposal of Old Devices
Devices marked with this symbol are subject to
European Directive 2002/96/EC. All electric and
electronic devices must be disposed of separately from
household waste at official disposal centres. Also the
USB nano receiver is an electronics device and needs
to be disposed of properly.
Avoid hazards to the environment and dangers to your personal
health by disposing of the device properly. For further information
about proper disposal, contact your local government, disposal
bodies or the shop where you bought the device.

Wireless Mouse OM1008-SL
English - 11
Respect the environment. Old batteries do not belong in with
domestic waste. They must be handed in to a collection point for
waste batteries.
Recycle the packaging material properly too. Cardboard packaging
can be taken to paper recycling containers or public collection
points for recycling. Any film or plastic contained in the packaging
should be taken to your public collection points for disposal.
Package Contents
Please check that delivery contents are complete using this list:
- Wireless Mouse OM1008-SL
- USB nano receiver OM1008-SL-R
(inserted into the wireless mouse)
- 1 AA brand-name battery, 1.5V
- Driver CD
- User's Manual
If you find any items missing or damaged, please phone our hotline.
You will find the corresponding phone number in the last chapter
“Warranty Information”.

Wireless Mouse OM1008-SL
English - 12
Introduction
Thank you for purchasing the wireless mouse SilverCrest OM1008-
SL. This wireless mouse is, apart from the 3 standard buttons,
equipped with five special buttons that enable access to frequently-
used functions. The scroll wheel is a 4-way scroll wheel that
enables both vertical and horizontal scrolling. With the special
CPI button (1) you can toggle between a resolution of 800 cpi and
1600 cpi or between standard and media functionality. This
wireless mouse furthermore features an automatic standby function.
When not using the wireless mouse for a certain time, it will power
off. Press any button on the wireless mouse to power it back on.
System Requirements
- Intel®Pentium®III / AMD AthlonTM or higher
- 1 free USB 2.0 port
- Microsoft®Windows®XP, Windows Vista®or Windows®7
- CD-ROM or DVD-ROM Drive for installing the software

Wireless Mouse OM1008-SL
English - 13
Installing Hardware
Inserting the Battery
First insert the supplied battery into the wireless mouse, as shown
in the figure below. Take care to insert the battery into the device
observing the correct polarity (+ and – ).
10 On/Off button
11 Optical sensor
12 Mouse battery compartment
13 USB nano receiver

Wireless Mouse OM1008-SL
English - 14
Open the battery compartment (12) on the bottom of the
wireless mouse.
Remove the USB nano receiver (13).
Insert the supplied battery (size AA) into the wireless mouse
with the correct polarity (+ and -); see the illustration.
Close the battery compartment (12).
Press the On/Off button (10) on the bottom of the wireless
mouse to power it on.
If the indicator light (5) on the upper side of the wireless
mouse lights up orange, the battery is depleted. When
this happens, replace the battery with a new battery of the
same type.
Should the wireless mouse fail to work, power it off and
back on. Sometimes removing and re-inserting the
battery will also help.
The wireless mouse features an automatic standby
function. When not using the wireless mouse for a certain
time, it will power off. Press any button on the wireless
mouse to power it back on.

Wireless Mouse OM1008-SL
English - 15
Connecting the USB Nano Receiver
If you still have your old mouse connected to the computer, please
shut down your computer, disconnect the device and restart the
computer.
Plug the USB nano receiver (13) into a free USB port on your
powered-on computer.
The operating system will detect the new hardware and will
automatically install the corresponding drivers. Depending on the
operating system, one of the following messages will appear:
Under Windows®XP
When connecting the receiver for the first time, the operating
system will prompt "Found New Hardware". Wait until the
message "Your new hardware is installed and ready to use"
appears before using the wireless mouse.
Under Windows Vista®, Windows®7
When connecting the receiver for the first time, the operating
system will prompt "Installing device driver software". Wait until
the message "Your devices are ready to use" appears. Your
wireless mouse has been successfully configured and can now
be used.

Wireless Mouse OM1008-SL
English - 16
Installing the Software
In order to be able to use the full function-capabilities of your
mouse, you must install the supplied software. To do this, insert the
supplied CD-ROM into the CD-ROM drive of your computer. The
setup process should start automatically, otherwise double-click on
the "setup.exe" file on the CD-ROM to start manually.
Only under Windows Vista®and Windows®7 the setup will be
temporarily blocked and a message „An unidentified program wants
access to your computer” appears. To continue setup, click "Allow".
The following setup screens correspond to the Windows®7
operating system. For Windows®XP/Vista these screens will slightly
vary but their contents is the same.

Wireless Mouse OM1008-SL
English - 17
To launch setup, click <Next>.
Here you can select the
destination folder for the
installation with the <Change>
button or use the suggested
folder. To proceed click <Next>.

Wireless Mouse OM1008-SL
English - 18
Click <Finish> to finish the
setup programme.
If you are prompted to restart your computer, restart it
before using the software.