Silvercrest SSTMC 600 A1 User manual

BLENDER / STANDMIXER / BLENDER SSTMC 600 A1
IAN 499149_2204
BLENDER
Mode d’emploi
BLENDER
Operating instructions
BLENDER
Gebruiksaanwijzing
STOLNÍ MIXÉR
Návod k obsluze
BLENDER
Betjeningsvejledning
MIXÉR
Návod na obsluhu
TURMIXGÉP
Használati utasítás
STANDMIXER
Bedienungsanleitung
BLENDER KIELICHOWY
Instrukcja obsługi
BATIDORA DE VASO
Instrucciones de uso
MEŠALNIK
Navodila za uporabo
FRULLATORE
Istruzioni per l'uso
БЛЕНДЕР
Ръководство за експлоатация
BLENDER
Instrucţiuni de utilizare
ΜΠΛΕΝΤΕΡ
Οδηүίες χρήσης
BLENDER
Upute za upotrebu

GB/ IE Operating instructions Page 1
DE/AT/CH Bedienungsanleitung Seite 19
FR/BE Mode d’emploi Page 37
NL/BE Gebruiksaanwijzing Pagina 57
CZ Návod k obsluze Strana 75
PL Instrukcja obsługi Strona 93
SK Návod na obsluhu Strana 111
ES Instrucciones de uso Página 129
DK Betjeningsvejledning Side 147
IT Istruzioni per l'uso Pagina 165
HU Használati utasítás Oldal 183
SI Navodila za uporabo Stran 201
HR Upute za upotrebu Stranica 219
RO Instrucţiuni de utilizare Pagina 237
BG Ръководство за експлоатация Cтраница 255
GR Οδηүίες χρήσης Σελίδα 273

GB│IE │ 1 ■
SSTMC 600 A1
Content
Introduction...................................................2
Intended use ..................................................2
Package contents ..............................................2
Description of the appliance .....................................3
Technical data .................................................3
Safety instructions .............................................4
Unpacking ....................................................6
Setting up.....................................................6
Operation ....................................................7
Fitting and filling the blender ............................................... 7
Selecting the speed setting ................................................. 8
Filling while in use ........................................................ 9
Removing the blender ..................................................... 9
Useful tips ....................................................9
Recipes......................................................10
Banana shake ..........................................................10
Vanilla shake ...........................................................10
Cappucino shake........................................................ 10
Tropical mix ............................................................11
Nut nougat shake .......................................................11
Carrot shake ...........................................................11
Blackcurrant mix ........................................................11
Hawaii shake...........................................................12
Fruity pineapple and strawberry mix.........................................12
Andalusian cold soup (gazpacho) ..........................................12
Cleaning.....................................................13
Cleaning the blender..................................................... 13
Cleaning the motor block .................................................15
Storage .....................................................15
Disposal .....................................................15
Disposal of the appliance ................................................. 15
Disposal of the packaging.................................................16
Kompernass Handels GmbH warranty............................16
Service................................................................ 18
Importer ............................................................... 18

■ 2 │ GB│IE SSTMC 600 A1
Introduction
Congratulations on the purchase of your new appliance.
You have selected a high-quality product. These operating instructions are a part
of this product. They contain important information on safety, usage and disposal.
Before using the product, familiarise yourself with all operating and safety
instructions. Use the product only as described and only for the specified areas
of application. In addition, pass these documents on, together with the product,
to any future owner.
Intended use
This appliance is intended exclusively for…
■ mixing, puréeing and stirring foods as well as crushing ice cubes,
■ use exclusively in normal domestic amounts and only for private use in a
domestic environment in dry rooms.
This appliance is not intended for…
■ chopping herbs, onions, meat and hard food components such as nuts, pits,
large seeds or stalks,
■ making nut puree,
■ the processing of materials that are not foodstuffs,
■ commercial or industrial use,
■ for use in damp environments or outdoors,
■ processing hot/boiling liquids.
Use only the accessories and spare parts that are specified for this appliance.
Other parts may not be adequately suitable or safe!
Package contents
After unpacking, check to ensure all items are available. The package contains:
▯ Motor block, with power cable and plug
▯ Blender
▯ Lid
▯ Measuring cap
▯ Operating instructions

GB│IE │ 3 ■
SSTMC 600 A1
Description of the appliance
1Measuring cap
2Lid
3Blender
4Cutting blades
5Switch
6Motor block
7Cable retainer
8Scale
9Rubber lid seal
Technical data
Nominal voltage 220–240 V ∼ (alternating current),
50–60 Hz
Nominal power consumption 600 W
Storage capacity approx. 2.3 litres
Max. capacity 1.75 litres
Protection Class II / (double insulation)
CO time 3 minutes
All of the parts of this appliance that come into
contact with food are food-safe.
The CO time (continuous operation time) is the amount of time an appliance can
be operated without the motor overheating and becoming damaged. When the
specified CO time has been reached, the appliance must be switched off until
the motor has cooled down to room temperature.

■ 4 │ GB│IE SSTMC 600 A1
Safety instructions
DANGER! ELECTRIC SHOCK!
► Ensure that the appliance, the power cable and the power
plug are never immersed in water or other liquids.
► Use the appliance only in dry rooms; never use it outdoors
or in damp environments.
► Ensure that the power cable never becomes wet or damp
during operation. Route the power cable in such a way that
it cannot become trapped or damaged in any way.
► To avoid potential risks, if the appliance power cable is dam-
aged, it must be replaced by the manufacturer, its customer
service or by a qualified technician.
► Always remove the plug from the power socket after use.
Switching off the appliance is not sufficient because the
appliance receives power as long as the power plug is con-
nected to the socket.
► Check to ensure that the appliance is in a serviceable con-
dition before use. The appliance may not be used if it shows
signs of damage, especially to the motor block or the blender
attachment.
► Remove the plug from the socket immediately if you notice
unexpected smells or noises coming from the appliance
while it is in use or if there is an evident malfunction.
WARNING! RISK OF INJURY!
► NEVER insert your hand or fingers into the blender, especially
when it is in use. The cutting blades are extremely sharp!
► DO NOT remove the lid when the appliance is in operation.
► To ensure you can react immediately in the event of danger,
never leave the appliance running unattended.

GB│IE │ 5 ■
SSTMC 600 A1
WARNING! RISK OF INJURY!
► Do not insert cutlery items or mixing tools into the blender while
the appliance is in use. There is a considerable risk of injury if
these come into contact with the swiftly rotating cutting blades!
► Children should be supervised to ensure that they do not
play with the appliance.
► Never use the appliance for purposes other than those described
in these instructions.
► Risk of injury if appliance is misused.
► The appliance should always be disconnected from the mains
when not supervised and before assembly, disassembly or
cleaning.
► This appliance is not to be used by children.
► The appliance and its mains cable must be kept away from
children.
► This appliance can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning safe use of the appliance, and if they are aware
of the potential risks.
► Do not allow children to play with the appliance.
► Be careful when handling the appliance. The cutting blades
are extremely sharp!
► Take care when emptying the blender! The cutting blades
are extremely sharp!
► Take care when cleaning the appliance! The cutting blades
are extremely sharp!
► Switch the appliance off and disconnect the plug from the
power supply before changing accessories or getting hold
of parts that move during operation.

■ 6 │ GB│IE SSTMC 600 A1
WARNING! RISK OF INJURY!
► Always make sure that the blender is switched off before
removing the jug from the motor block!
► Use the blender only with the supplied motor block!
CAUTION! MATERIAL DAMAGE!
► Do not use the appliance in direct sunlight or near any
heatgenerating appliances.
► NEVER fill the blender with boiling liquids or other foods!
Allow these to cool to a lukewarm temperature.
► NEVER operate the appliance when it is empty, i.e. without
ingredients in the blender attachment.
Unpacking
■ Remove all packaging materials or protective films from the appliance. Retain
the packaging, so that you can store the appliance safely or send it by post,
e.g. if it needs to be repaired.
■ Before using the appliance, check that it is free of damage; check also that
the power cable and plug as well as all accessories and appliance parts are
undamaged.
■ Clean all components carefully before using the appliance for the first time
(see “Cleaning”).
Setting up
Once all components have been cleaned as described in the section “Cleaning”:
■ Position the appliance so that,…
–that the mains cable passes through the recess at the rear of the
appliance,
–the power plug is immediately accessible, so that it can be quickly
withdrawn in the event of danger,
–that it is stable and not liable to slip, and so that the sucker feet can
attach firmly and the appliance cannot tip over due to vibration,
–that the mains cable is not in the working area and thus does not present a
risk of being inadvertently snagged and tipping the appliance over.

GB│IE │ 7 ■
SSTMC 600 A1
Operation
WARNING!
► The motor switches off automatically as soon as the blender 3is removed
from the motor block 6or the lid 2is opened. In such cases it may be
easy to forget that the machine is still switched on. The motor will then start
unexpectedly as soon as the blender attachment 3is fitted or the lid 2is
closed again:
Therefore:
–Do not insert the power plug into the wall socket until the blender 3 is
filled and mounted with its lid fitted and closed.
–Before fitting the blender, always check to see that the appliance is
switched off or that the power plug has been removed.
–Switch the appliance off first, pull the plug out and wait until the motor
has come to a standstill before removing the blender 3or opening the
lid 2.
Fitting and filling the blender
1) Remove the blender 3from the motor block 6in a vertical, upward motion.
2) Remove the lid 2by rotating it anticlockwise towards position (see Fig 1)
until you can pull it upwards.
3) Fill the blender 3to at least to the lowest line of the scale 8and at most to the
MAX mark. For optimum results, we recommend the following maximum filling
quantities:
Food Max. filling
quantity
Recom-
mended
level
Recommended
processing time
Liquids 1750 ml 1‒3 60 sec.
Yoghurt-based drinks 1250 ml 2‒5 90 sec.
Milkshakes/
smoothies 1250 ml 2‒5 60‒90 sec.
Pancake mix 1250 ml 3‒5 90 sec.
Baby food 750 ml 5 3 min.
Mayonnaise 2 eggs
250 ml oil 3‒5 90‒120 sec.
Vegetable soup 1500 ml 3‒5 3 min.
Ice cubes
250 ml
(approx. 14‒15
pieces)
P 12x

■ 8 │ GB│IE SSTMC 600 A1
4) Press the lid 2 firmly down onto the blender 3. Close the lid 2 by turning
it clockwise to position until it audibly engages (see Fig. 2). Ensure that the
pouring spout on the blender 3is closed. The motor cannot start until the
lid2is fitted flush.
Fig. 1 Fig. 2
5) Press the measuring cap 1into the lid as far as the stop.
6) Place the completely filled and closed blender 3onto the motor block 6
with the handle to the right. Make sure that the arrow Ton the blender 3
points to the zmarking on the motor block 6. Turn the blender attachment
3 slightly back and forth if it does not fit properly into place immediately.
The motor cannot start until the blender 3is fitted flush to the motor unit.
Selecting the speed setting
Once the blender 3is filled and sitting completely closed on the motor block 6,
you can switch on the appliance.
Set the switch 5to…
■Level 1–3
for liquids or soft foodstuffs, for mixing, blending and stirring
■Level 3–5
for more solid foods or for chopping
■Level P (pulse function)
for short, powerful impulse operation, e.g. for crushing ice cubes or when
cleaning. To prevent overloading the motor, the switch 5does not lock in this
position. Therefore, hold the switch 5 in this position for short periods only.
NOTE
► Fill the blender 3with ice cubes up to the 250 ml mark at the maximum.
Otherwise, the ice cubes will not be crushed optimally.

GB│IE │ 9 ■
SSTMC 600 A1
Filling while in use
WARNING!
► If you want to add additional foods during operation, use only the measuring
cap 1 provided for this purpose. Do NOT open the lid 2.
► Do not insert cutlery items or mixing tools into the blender 3while the
appliance is in use. There is a considerable risk of injury if these come into
contact with the swiftly rotating cutting blades 4!
To add more food while the appliance is in use,…
1) Remove the measuring cap 1from the lid 2.
2) Add the ingredients.
3) Press the measuring cap 1back into the lid.
Removing the blender
Once you have finished processing the food in the attachment:
1) Always start by setting switch 5to the off position (“0”) and pulling out the
mains plug.
2) Wait until the motor has come to a complete standstill before removing the
blender 3. Remove the blender 3from the motor block 6in a vertical,
upward motion.
Useful tips
■ To achieve the best results when puréeing firm ingredients, add small amounts
one after the other into the blender 3 rather than a single large portion.
■ When processing firm ingredients, cut them into small pieces (2–3 cm).
■ Add at least 50 ml of liquid when pureeing fruit or vegetables.
■ Add thicker ingredients (such as yoghurt) into the blender 3first. If any of the
ingredients are not picked up during mixing, remove the blender 3from the
motor block 6, remove the lid 2and stir the ingredients with a suitable
implement, such as a spoon. Replace the blender 3back on the motor block
6with the lid 2closed and continue mixing.
■ When mixing liquid ingredients, start off with a small amount of liquid.
Gradually add more liquids to the mixture through the measuring cap.
■ The appliance can be stabilised by placing your hand on top of the closed
blender during operation.

■ 10 │ GB│IE SSTMC 600 A1
■ For stirring solid or very thick liquid foods, it can be useful to use level P
to prevent the cutting blades 4from blocking.
NOTE
► Do not use the appliance to grind crystals of cooking salt, refined sugar or
white sugar. For example, to make powdered sugar.
Recipes
Banana shake
▯ 2 bananas
▯ approx. 2 tbsp. sugar
(depending on the ripeness of the bananas and personal taste)
▯ ½ l milk
▯ 1 dash of lemon juice
Peel the bananas and liquidise them at level 2. Gradually add the milk, then the
sugar and the lemon juice. Keep mixing everything until you have a smooth and
uniform liquid. Serve the shake chilled.
Vanilla shake
▯ ¼ l milk
▯ 250 g vanilla ice cream
▯ 125 g ice cubes
▯ 1½ tsp. sugar
Crush the ice cubes using level P. Place the remaining ingredients into the mixer.
Mix everything at Level 2 until the liquid has a smooth consistency.
Cappucino shake
▯ 65 ml cold espresso (or a very strong coffee)
▯ 65 ml milk
▯ 15 g sugar
▯ 65 g vanilla ice cream
▯ 100 g ice cubes
Crush the ice cubes using level P. Add the espresso, milk and sugar. Mix
everything together at level 2 until the sugar has dissolved. Finally, add the
vanilla ice cream and then briefly mix everything together at level 1.

GB│IE │ 11 ■
SSTMC 600 A1
Tropical mix
▯ 125 ml pineapple juice
▯ 60 ml papaya juice
▯ 50 ml orange juice
▯ ½ small tin of peaches with juice
▯ 125 g ice cubes
Crush the ice cubes using level P. Place all ingredients into the mixer and blend
them together at level 3.
Nut nougat shake
▯ ½ l milk
▯ 200 g nut nougat spread
▯ 1 scoop of vanilla ice cream
▯ 50 ml cream
Add all the ingredients to the blender and mix at level 3 until everything is evenly
blended together.
Carrot shake
▯ 300 ml apple juice
▯ 500 ml carrot juice
▯ 4 tbsp. cooking oil (wheatgerm oil or rapeseed oil)
▯ 4 tbsp. of lemon juice
▯ Powdered ginger
▯ Pepper
Add the apple juice, cooking oil and lemon juice into the blender and mix
everything together at level 2. Then add the carrot juice and mix everything
together at level 2. To finish, add the powdered ginger and pepper to taste.
Blackcurrant mix
▯ 2 tsp. honey
▯ 2 bananas
▯ ¼ l buttermilk
▯ ¼ l blackcurrant juice
Place all ingredients into the mixer and blend them together at level 3.

■ 12 │ GB│IE SSTMC 600 A1
Hawaii shake
▯ 4 bananas
▯ ¼ l pineapple juice
▯ ½ l milk
▯ 2 tbsp. honey
▯ ¼ l rum
Peel the bananas and liquidise them at level 2. Then add the other ingredients
and mix everything together at level 1.
Fruity pineapple and strawberry mix
▯ 250 ml pineapple juice
▯ 200 g strawberries
▯ 300 ml apple juice
▯ 4 ice cubes
Wash the strawberries and remove the green parts. Crush the ice cubes using
level P. Liquidise them at level 2. Then add the other ingredients and mix
everything together at level 1.
Andalusian cold soup (gazpacho)
▯ ½ cucumber
▯ 1 large tomato
▯ 1 green pepper
▯ ½ onion
▯ 1 garlic clove
▯ ½ white bread roll
▯ ½ tsp. salt
▯ 1 tsp. red wine vinegar
▯ 1 tbsp. olive oil
Cut the vegetables into pieces approx. 2 cm in size. Start by adding the first the
tomatoes and then the cucumber to the blender. Liquidise them at level 3. Add
the remaining ingredients and then liquidise/blend them all together at level 3
until a smooth soup is created. Serve the soup with bread.
NOTE
► These recipes are provided subject to change. All ingredients and prepara-
tion information are guiding values. Adapt these recipe suggestions based
on your personal experience.
NOTE
► In cases of lactose intolerance, we recommend you use a lactose-free milk.
Keep in mind, however, that lactose-free milk is a little sweeter.

GB│IE │ 13 ■
SSTMC 600 A1
Cleaning
DANGER! ELECTRIC SHOCK!
Before starting to clean the blender and its components:
► Ensure that the motor is switched off and the power plug removed from the
socket.
Do not immerse the motor block 6 in water or other liquids. This could
result in you receiving a fatal electric shock and cause damage to the
appliance.
► Never open the housing of the appliance. Otherwise, there is a risk of a
fatal electric shock.
WARNING! RISK OF INJURY!
► Handle the cutting blades 4with extreme caution. They are very sharp.
CAUTION! PROPERTY DAMAGE!
► Do not use solvents or abrasive cleaners on the plastic surfaces, they could
be damaged by them.
Cleaning the blender
■ To prevent injuring yourself on the cutting blades 4, clean the blender 3 only
with a long-handled washing-up brush.
■ Clean the measuring cap 1and the lid 2in mild soap solution. Ensure that
the rubber seal 9is correctly fitted before using the lid 2again.
NOTE
You can also clean the lid 2together with the rubber seal 9, the
measuring cap 1and the blender attachment 3in the dishwasher
along with the cutting blades 4. We recommend not removing the
rubber seal 9when cleaning in the dishwasher, as it might otherwise deform.
■ If you clean the appliance directly after use, you can usually achieve
sufficiently hygienic cleaning results by using the following alternatives:
Fill the blender 3with 750 ml of water and add a couple of drops of mild
washing up liquid. Close the lid 2and fit the blender 3onto the motor
block 6. Insert the mains plug into the socket and activate the pulse function
a few times so that the cutting blades 4 plough through the water at maximum
speed. Afterwards, rinse the blender 3with plenty of clean water to remove
any washing up liquid residues.

■ 14 │ GB│IE SSTMC 600 A1
■ To remove stubborn dirt, you can remove the attachment Awith the cutting
blades 4from the blender jug 3:
A
B
Fig. 3
1) Remove the blender 3from the motor block 6. For better stability, remove
the lid 2by turning it anticlockwise towards the position (see Fig. 1)
until you can pull it off upwards.
2) Turn the appliance upside down and turn the attachment Aanticlockwise so
that it can be detached from the jug of the blender3(see Fig. 3).
3) Clean both parts in a mild soap solution or in the dishwasher.
NOTE
If necessary, you can remove the sealing ring Bfrom the attachment A. Pull
the sealing ring Bcarefully out of the attachment Aand clean it in a mild
soap solution. Rinse it off afterwards with fresh water.
4) Dry all parts thoroughly before reassembling them.
5) Replace the attachment Awith the cutting blades 4onto the blender jug
3and turn it clockwise. Make sure the sealing ring Bis inserted correctly.

GB│IE │ 15 ■
SSTMC 600 A1
Cleaning the motor block
1) Clean the surfaces with a damp cloth. If necessary, apply a mild washing-up
liquid to the cloth. Afterwards, wipe off with a cloth moistened only with
water to ensure that no detergent remains on the appliance. Then dry the
surfaces thoroughly.
2) When cleaning, always check that the contact switch in the fitting for the
blender 3 is not blocked by soiling residues. If you cannot dislodge any
blockages with the corner of a piece of paper, make contact with Customer
Services. Do not use any hard objects, these could damage the contact
switch.
Storage
1) If you do not intend to use the blender for an extended period, clean it
thoroughly (see chapter “Cleaning”).
2) Wrap the power cable around the cable retainer 7on the base of the
motor block 6.
3) Store the blender in a cool and dry location.
Disposal
The product and its packaging are
recyclable. They are subject to an
extended manufacturer responsibility
and will be collected separately.
Disposal of the appliance
The adjacent symbol of a crossed-out dustbin means that this
appliance is subject to Directive 2012/19/EU. This directive states
that this appliance may not be disposed of in the normal household
waste at the end of its useful life, but must be taken to specially
set-up collection locations, recycling depots or disposal companies.
The disposal is free of charge for the user. Protect the
environment and dispose of this appliance properly.
If your old appliance has stored any personal data, you are responsible for
deleting it yourself before returning it.
Your local community or municipal authorities can provide
information on how to dispose of the worn-out product.

■ 16 │ GB│IE SSTMC 600 A1
Disposal of the packaging
The packaging materials have been selected for their environmental
friendliness and ease of disposal and are therefore recyclable.
Dispose of packaging materials that are no longer needed in
accordance with applicable local regulations.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging
material components for disposal, if necessary. The packaging
material is labelled with abbreviations (a) and numbers (b) with the
following meanings: 1–7: plastics, 20–22: paper and cardboard,
80–98:composites.
Kompernass Handels GmbH warranty
Dear Customer,
This appliance has a 3-year warranty valid from the date of purchase. If this product
has any faults, you, the buyer, have certain statutory rights. Your statutory rights
are not restricted in any way by the warranty described below.
Warranty conditions
The warranty period starts on the date of purchase. Please keep your receipt in a
safe place. This will be required as proof of purchase.
If any material or manufacturing fault occurs within three years of the date of
purchase of the product, we will either repair or replace the product for you or
refund the purchase price (at our discretion). This warranty service requires that
you present the defective appliance and the proof of purchase (receipt) within
the three-year warranty period, along with a brief written description of the fault
and of when it occurred.
If the defect is covered by the warranty, your product will either be repaired or
replaced by us. The repair or replacement of a product does not signify the
beginning of a new warranty period.
Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under the warranty.
This also applies to replaced and repaired components. Any damage and
defects present at the time of purchase must be reported immediately after
unpacking. Repairs carried out after expiry of the warranty period shall be
subject to a fee.

GB│IE │ 17 ■
SSTMC 600 A1
Scope of the warranty
This appliance has been manufactured in accordance with strict quality
guidelines and inspected meticulously prior to delivery.
The warranty covers material faults or production faults. The warranty does not
extend to product parts subject to normal wear and tear or to fragile parts which
could be considered as consumable parts such as switches, batteries or parts
made of glass.
The warranty does not apply if the product has been damaged, improperly used
or improperly maintained. The directions in the operating instructions for the
product regarding proper use of the product are to be strictly followed. Uses and
actions that are discouraged in the operating instructions or which are warned
against must be avoided.
This product is intended solely for private use and not for commercial purposes.
The warranty shall be deemed void in cases of misuse or improper handling, use
of force and modifications/repairs which have not been carried out by one of
our authorised Service centres.
Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions:
■ Please have the till receipt and the item number (IAN)499149_2204
available as proof of purchase.
■ You will find the item number on the type plate on the product, an engraving
on the product, on the front page of the operating instructions (below left) or
on the sticker on the rear or bottom of the product.
■ If functional or other defects occur, please contact the service department
listed either by telephone or by e-mail.
■ You can return a defective product to us free of charge to the service address
that will be provided to you. Ensure that you enclose the proof of purchase
(till receipt) and information about what the defect is and when it occurred.
You can download these instructions along with many other manuals, product
videos and installation software at www.lidl-service.com.
This QR code will take you directly to the Lidl service page
(www.lidl-service.com) where you can open your operating instructions
by entering the item number (IAN) 499149_2204.