SilverStone HB01 User manual

1.Mit Schrauben sichern, wobei die abgeschrägte Seite nach vorne zeigt.
1.Fíjela con tornillos con el borde biselado hacia fuera.
1.Sécuriser avec des vis avec le côté biseauté vers l'avant.
1.Fissaggio con viti con il lato smussato rivolto in avanti.
1.Закрепляется винтами скошенной стороной вперёд.
1.경사진 면을 앞으로 향하게 하여 나사로 고정합니다.
1.斜め処理面を前面にしてネジで固定。
1.以螺絲鎖固手把，斜邊朝前。
1.以螺丝锁固手把，斜边朝前。
INTRODUCTION
SPECIAL FEATURES
SPECIFICATIONS
INSTALLATION GUIDE
SilverStone HB01 is a carrying handle accessory for RVZ02 and ML08.
Its beveled edge shape perfectly matches RVZ02’s front panel for seamless
appearance and improved system portability. For current owners of RVZ02
or ML08, this is an excellent accessory to add.
Beveled edge shape perfectly matches RVZ02
Compatible with RVZ02 and ML08
Light weight, sturdy carrying handle
Model No.
Color
Material
Application
Dimension
SST-HB01B
Black
ABS
Carrying handle for RVZ02, also fits ML08*
87mm (L) x 40mm (H) x 370mm (W)
* Beveled edge designed to match RVZ02 exterior styling, ML08 is only
compatible mechanically.
RVZ02 ML08
1.Secure with screws with beveled side facing forward.
HB01
CARRYING HANDLE FOR SMALL
FORM FACTOR CHASSIS
MANUAL
G11227690

2.Die ungefähren Positionen der Bohrlöcher (falls erforderlich) entnehmen
Sie bitte der Abbildung.
2.Por favor, consulte la ilustración para las posiciones relativas de los
agujeros a taladrar si es necesario.
2.S'il vous plaît, se référer à l'illustration pour les positions relatives des
trous à percer, si nécessaire.
2.Fare riferimento all'illustrazione per le relative posizioni dei fori da
praticare, se necessario.
2.Пожалуйста, обратитесь киллюстрациям для корректного
расположения отверстий вслучае необходимости их просверливания.
2.필요한 경우 뚫어야 하는 구멍의 상대적 위치는 그림을 참조하십시오.
2.必要な場合は図を参照して穴開け箇所を確認してください。
2.螺絲孔位如圖示，若需自行加工鑽孔機殼，可供參考。
2.螺丝孔位如图示，若需自行加工钻孔机箱，可供参考。
2.Please refer to illustration for relative positions of the holes to be drilled
if needed.
WARRANTY INFORMATION