SilverStone PI01 User manual

Aluminum case for Raspberry Pi
3 Model B/B+
2 Model B
1 Model B+
PI01

To fulfill the needs of Raspberry Pi users, SilverStone
created PI01, an aluminum case compatible with Raspberry Pi
3B+/3B/2B/1B+ version. It’s easy to install and includes two
heatsinks and thermal pads to help conduct heat from CPU to
aluminum casing.
Wall mount capable
Aluminum casing designed for additional heat dissipation
Two heatsinks and thermal pads included
Compatible with Raspberry Pi 3B+/3B/2B/1B+ version
SPECIAL FEATURES
INTRODUCTION

SPECIFICATIONS
SST-PI01B
Black
Aluminum
Raspberry Pi 3B+/3B/2B/1B+ version
55 g
90 mm (W) x 28 mm (H) x 62 mm (D)
Heatsink
Aluminum
Heatsink 1
Heatsink 2 : 9 mm (W) x 15.2 mm (H) x 9 mm (D), 2.6 g : 14 mm (W) x 15.2 mm (H) x 14 mm (D), 6.5 g
Model No.
Color
Material
Support Raspberry Pi Version
Net weight
Dimension
Material
Net Weight and dimension
Thermal Pad
1.5W/m.k
-40 °C ~ 200 °C
Thermal conductivity
Operating temperature
0.5 / 1.25mm
Blue
Gray
Gray
Pad
Pad 1
Pad 2
: 14 mm (W) x 0.5 mm (H) x 14 mm (D), 0.25 g
: 14 mm (W) x 1.25 mm (H) x 14 mm (D), 0.4 g
: 9 mm (W) x 1.25 mm (H) x 9 mm (D), 0.2 g
Thermal pad thickness
Net Weight and dimension

1. PI01 case x 1 pcs
2. PCB screw x 5 pieces
3. Case screw x 5 pieces
4. Screwdriver x 1 pcs
5. Heatsink x 2 pieces
6. Gray thermal pad 1 x 4 pieces
7. Gray thermal pad 2 x 4 pieces
8. Blue thermal pad x 4 pieces
9. Foot pad x 4 pieces
INSTALLATION GUIDE
PACKAGE CONTENT
Place Raspberry Pi PCB on bottom half of PI01 case
1
1
6
7
8 5 9
4
2
3

Adhere corresponding thermal pads on top and bottom of
heatsinks
3
Secure with PCB screws
2

Place and align aluminum case cover over the bottom half
and secure with screws
5
Place heatsinks on Raspberry Pi’s CPU and IC
4

*Note: If using Raspberry Pi 3 B+, please use the blue thermal
pad on CPU heatsink,
Adhere foot pads to complete installation
6

WARRANTY
WARRANTYTERMS & CONDITIONS
All SilverStone retail products have from the date of
purchase, a minimum of 1 year limited warranty (select products
listed below have 2, 3 or 5 year warranty)
1. Product component defects or damages resulted from defective
production is covered under warranty.
Defects or damages with the following conditions will be fixed
or replaced under SilverStone Technology’s jurisdiction.
a) Usage in accordance with instructions provided in this manual,
with no misuse, overuse, or other inappropriate actions.
b) Damage not caused by natural disaster (thunder, fire, earthquake,
flood, salt, wind, insect, animals, etc…)
c) Product is not disassembled, modified, or fixed. Components
not disassembled or replaced.
d) Warranty mark/stickers are not removed or broken. Loss or
damages resulted from conditions other than ones listed above
are not covered under warranty.
2. Under warranty, SilverStone Technology’s maximum liability is
limited to the current market value for the product (depreciated
value, excluding shipping, handling, and other fees). SilverStone
Technology is not responsible for other damages or loss
associated with the use of product.
3. Under warranty, SilverStone Technology is obligated to repair
or replace its defective products. Under no circumstances will
SilverStone Technology be liable for damages in connection
with the sale, purchase, or use including but not limited to loss
of data, loss of business, loss of profits, loss of use of the product
or incidental or consequential damage whether or not foreseeable
and whether or not based on breach of warranty, contract or
negligence, even if SilverStone Technology has been advised
of the possibility of such damages.

4. Warranty covers only the original purchaser through authorized
SilverStone distributors and resellers and is not transferable to
a second hand purchaser.
5. You must provide sales receipt or invoice with clear indication
of purchase date to determine warranty eligibility.
6. If a problem develops during the warranty period, please
contact your retailer/reseller/SilverStone authorized distributors
or SilverStone http://www.silverstonetek.com. Please note that:
(i) You must provide proof of original purchase of the product
by a dated itemized receipt
(ii) You shall bear the cost of shipping (or otherwise transporting)
the product to SilverStone authorized distributors. SilverStone
authorized distributors will bear the cost of shipping (or
otherwise transporting) the product back to you after
completing the warranty service
(iii) Before you send the product, you must be issued a Return
MerchandiseAuthorization (“RMA”) number from SilverStone.
Updated warranty information will be posted on SilverStone’s
official website. Please visit http://www.silverstonetek.com for
the latest updates.

ADDITIONAL INFO & CONTACTS
For North America ([email protected])
SilverStone Technology in North America may repair or replace
defective product with refurbished product that is not new but has
been functionally tested. Replacement product will be warranted
for remainder of the warranty period or thirty days, whichever is
longer. All products should be sent back to the place of purchase
if it is within 30 days of purchase, after 30 days, customers need
to initiate RMA procedure with SilverStone Technology in USAby
first downloading the “USA RMA form for end-users” form from
the below link and follow its instructions.
http://silverstonetek.com/contactus.php
For Australia only ([email protected])
Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major
failure. Please refer to above “Warranty terms & conditions” for
further warranty details.
SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd.,
Zhonghe Dist., New Taipei City 235 Taiwan R.O.C.
+ 886-2-8228-1238 (standard international call charges apply)
For Europe [email protected]
For China [email protected]
For Japan [email protected]
For all other regions [email protected]