Sim-Lab INTEGRATED VARIO MONITOR MOUNT User manual

INTEGRATED VARIO™ MONITOR MOUNT
SINGLE/TRIPLE
VERSION 1.0
Last updated: 19-09-2023
INSTRUCTION MANUAL

2|2 15
BEFORE YOU START:
Thank you for purchasing this Sim-Lab product! On the following pages, you will find detailed instructions
on assembly. This requires only a set of simple tools and some of your time. Please check the bill of
materials before starting (page 14) and make sure all the parts are delivered.
We have combined the single and triple integrated monitor mounts into one manual. Although the cockpit
depicted is our P1-Pro, this integrated monitor mount is compatible with our other cockpits. The only
exception is the X1-Pro, which has its own integrated monitor mount.
This product combines some products we normally offer separately. We encourage you to read the
product manuals for included products if this one doesn’t answer all of your questions. Please refer to the
following if needed:
www.sim-lab.eu/xero-play-pivots-manual
www.sim-lab.eu/vario-vesa-manual
Inserting Slot-Nuts:
You got excited, finished the build, put the caps on, but forgot to install
one element. Do not worry. It happens to everyone. In this diagram, you
can see how to insert a Slot-Nut directly into the slot from the side.
You can also use one of your smaller Hex wrenches to help wiggle
the Slot-Nut in place.
5/6MM
Tools needed:

3|3 15
M8 X 30
4X
Washer M8
(DIN 988)
4X
Integrated
Bracket
1X
Cap-Washer
M8
4X
Slot-Nut M8
4X
A8 A11 A10 A14
A2

4|4 15
M8 X 45
4X
Washer M8
(DIN 988)
4X
Cap-Washer
M8
4X
Integrated
Upright
2X
Washer M8
(A12)
4X
Lock-Nut M8
(A13)
4X A3
A6 A11 A10
A12 A13

5|5 15
Corner
Bracket
2X
M8 X 40
4X
Washer M8
(DIN 988)
4X
Cap-Washer
M8
4X
Washer M8
(A12)
4X
Lock-Nut M8
(A13)
4X
Nut Cap M8
(A15)
8X
A4 A10 A11 A7
A12 A13 A15