Simpli Home Wynden Hall brooklyn + max AXCVRCAPW-36 User manual

CAPE COD / BELMONT / NEWBURY
36 inch VANITY with TOP
MODEL # AXCVRCAPW-36
SI
M
P
I
I
HOME
L I F E B Y D E S I G N
®
1/12

SI
M
P
I
I
HOME
L I F E B Y D E S I G N
®
2/12
Questions, problems, assembly help, missing parts?
No need to return the product, we will gladly help and ship your
replacement parts free of charge
Please call Customer Service at 1-866-518-0120 ext. 262
Monday to Friday between 9 am – 4 pm EST
or go to
www.simpli-home.com/parts request
In order to assist you in a timely manner, please have the following information ready:
Model # _______________________ Part Number or Letter_______________________
Purchased at ___________________Date of Purchase ___________________________
If you wish to return the product, please contact the retailer where the
product was purchased.

NOT CORRECT
CORRECT
3/12
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
SAFETY INFORMATION
After opening the box, remove the packing materials. When removing
vanity top, always ensure it is removed vertically on its long edge.
Support the vanity top firmly while removing it from the box. Do not set
the vanity top down unsupported. Once properly installed, your vanity
top will be supported on the cabinet and breakage will be very unlikely.
Require 2 people for ease of assembly.

4/12
CARE and MAINTENANCE
For regular cleaning, use a damp cloth with warm water, rinse and dry
thoroughly to prevent streaks.
Wipe off any spills immediately. Liquid spills; such as shaving cream,
toothpaste, perfume, cologne, nail polish remover, hair coloring
and perm products, shampoo, drain and toilet bowl cleaner, alcohol,
medications, etc. should be cleaned up promptly.
NEVER use abrasive cleaners, tub and tile cleaner, toilet cleaner, or rough
cleaning pads. These types of cleaners can etch or dull stone surfaces. If
necessary, a soft buffing pad can be used.
Do not stand on the vanity top to fix overhead lights or other items. Do not
place extremely heavy items on the top.
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.

5/12
PRE-ASSEMBLY INFORMATION
MODEL # AXCVRCAPW-36
A B
PARTS DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
TOOL REQUIRED
VANITY TOP
QTY 1
CABINET
QTY 1
CLOTH SILICONE LEVEL

6/12
COMPONENTS – KEY DIAGRAM
MODEL # AXCVRCAPW-36
C
A
D
E
F
TP Vanity Top
A
C
D
E
F
DW Drawer
DR-L Le Door
DR-R Right Door
BSK Basket

7/12
ASSEMBLY
MODEL # AXCVRCAPW-36
STEP 1 Prepare the Cabinet
NOTE: Consult professional help if you are not familiar with installing
bathroom cabinetry and working with associated plumbing hardware
and tools. Installing a vanity cabinet and vanity top will require more
than one person.
NOTE: We recommend the water lines and drain be roughed in prior
to installing the unit. The plumbing and vanity should be installed by
an experienced plumber.
• Remove the foam between the vanity top (A) and the cabinet (B).
• Clean the top of the cabinet (B) with a cloth.
• Clean the floor beneath where the vanity will sit and ensure the floor
is level.
• Level the cabinet (B) side-to-side, front to back and diagonally.
• Trial fit the vanity top (A) on the cabinet (B) to ensure it is the correct size,
fit and that it is level.
• Secure the cabinet (B) to the wall if desired.
STEP 2 Install the Faucet
• While supporting the vanity top (A) carefully, install the faucet according
to the manufacturer’s instructions.
NOTE: Faucet not included with this vanity.

8/12
ASSEMBLY
MODEL # AXCVRCAPW-36
STEP 3 Install the Vanity Top
• Apply a 1/4 inch continuous bead of Construction Adhesive or Silicone
(not included) evenly along the top of the cabinet (B).
• Gently place the vanity top (A) on the cabinet (B). This will require two
people.
• The vanity top (A) must be flush with the back of the cabinet (B).
Standard size tops are designed with a ½ inch overlap on each side of the
cabinet except the back of the cabinet.
• Ensure the vanity top (A) is correctly positioned before the Construction
Adhesive or Silicone dries or becomes permanent (follow adhesive
manufacturer’s instructions).
• Have a soft cloth ready to wipe off any excess sealant should it compress
over the edge and onto the finished sides. Allow it to dry according to the
adhesive manufacturer’s instructions (24 hours recommended).
B
A

9/12
ASSEMBLY
MODEL # AXCVRCAPW-36
STEP 4 Adjusng the Levelers
• If the floor is uneven, the adjustable feet levelers can be rotated to raise
the vanity to the desired height.
Adjustable feet

10/12
ASSEMBLY
MODEL # AXCVRCAPW-36
STEP 5 Fixing Adjustable Hinges
To change the vertical height.
• Undo the two adjustable cabinet screws on both hinges
They are usually in slotted holes which means you can adjust up or
down by a few mm
• Then tighten the screws back up
To adjust the doors side to side
• Slightly turn the adjustable screws on both hinges on each door
• You may have to slightly release the locking screw to do this
• Make sure it's tight afterwards

11/12
ASSEMBLY
MODEL # AXCVRCAPW-36
STEP 5 Fixing Adjustable Hinges (cont’d)
To adjust the angle of a cabinet door
• Adjust only the screw either on the top or bottom
• For larger adjustments, turn the screw on the top one way and the
screw on the bottom the other way
• You may need to slightly release the locking screw to do this
• Make sure it's tight afterwards
To adjust doors not closing properly
Look at the side where the hinges are as you close the door. The door may
be touching the cabinet frame as it closes (binding).
• To fix this you need to adjust the door out towards you slightly
• Unscrew the locking screw on both hinges
• The door should slide in and out a little
• Pull it towards you slightly and re-tighten
• The ideal gap should not be any more than 1 mm

12/12
SI
M
P
I
I
HOME
L I F E B Y D E S I G N
®
WARRANTY
Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max
product. These products have been made to demanding, high-quality
standards and are guaranteed for domestic use against manufacturing
faults for a period of 12 months from the date of purchase. This warranty
does not affect your statutory rights.
In case of any malfunction of your product (failure, missing parts, etc.)
please contact us at our toll free service line at 1-866-518-0120 ext. 262
from 9 am to 4 pm, Monday to Friday, Eastern Standard Time or by email at
cust[email protected].
We reserve the right to repair or replace the defective product, at its
discretion.
This product is guaranteed for 12 months if used for normal purposes.
Any warranty is invalid if the product has been overloaded or subject to
neglect, improper use or an attempted repair by other than an authorized
agent. Heavy-duty or daily professional/commercial usage are not
guaranteed.
Due to continuous product improvement, we reserve the right to change
the product specifications without prior notice.