Simpli Home AXCHUN-08-GR User manual

1/17
HUNTER / MORENO / DIAZ
TV MEDIA STAND
MODEL # AXCHUN-08-GR

2/17
Questions, problems, assembly help, missing parts?
No need to return the product, we will gladly help and ship
your replacement parts free of charge
Please call Customer Service at 1-866-518-0120 ext. 262
Monday to Friday between 9 am – 4 pm EST
or go to
www.simpli-home.com/parts request
If you wish to return the product, please contact the retailer where the
product was purchased.
In order to assist you in a timely manner, please have the following information ready:
Model # ____________________Part Number or Letter______________________
Purchased at _________________Date of Purchase _________________________

3/17
IMPORTANT : for Please read this manual carefully before beginning
assembly of this product. keep this manual for future reference.
SAFETY INFORMATION
CAUTION: Injuries and damage can occur from furniture tip over if product is not
properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided
with the product. Consult our assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the
furniture.
Identify all the parts and hardware. Do not discard of the packaging until you have
checked that you have all of the parts and hardware required. hardware package
may have spare parts.
WARNING: This item contains small parts which can be swallowed by children
and pets. keep children and pets away during assembly. to avoid danger of
suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid scratches.
If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.

4/17
Perhaps the greatest environmental damage to wood furniture comes from wide swings in
relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity
rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and
contracts unequally along different grain directions. As humidity changes, the components
of wooden objects are continually pushing and pulling against each other. This pressure
often results in parts of furniture no longer fitting together closely or becoming distorted or
breaking from their own internal stresses.
The response to relative humidity changes begins with determining the annual average RH
for your particular space. Then try to keep the RH in the space where your furniture is as
close to that average as possible, generally within about 10% up or down. De-humidify in
the summer and humidify in the winter.
Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern
heating systems, which can drive down interior RH in the winter, almost invariably cause
problems for furniture. To counteract their effect, you can either modify the RH by keeping
furniture containing spaces cooler in the winter or most importantly, have a good working
humidifier for your home. A humidistat automatically works to balance the humidity in
your home so it is constant. Dry indoor air can suck enough moisture from its surroundings
to do permanent damage to wood, causing it to crack or split.
Remember, that not all woods are created equal. Two factors that help determine how
rapidly a wood will lose moisture are pore size and surface hardness. A piece made from a
dense and hard wood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished
piece while pieces with veneer finishes are not only stronger, but lose moisture more slowly
than other finishes.
To help protect your wood furniture, take these steps:
·Use a humidifier, preferably one with an automatic control system that can sense
the humidity level and adjust itself accordingly. Don't over-humidify; that can
damage wood by causing it to expand and contract.
·Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp.
·If you can avoid it, don't put furniture near heating vents. If you must, keep the
piece 3 to 4 inches away from the wall, giving the heat and air space to circulate.
·Dust with soft dry cloth.
·Do not use liquid or aerosol products.
·To avoid marking, do not place rubber ON SURFACE (FOOT PADS, ETC)
·For soil build-up, wipe with damp cloth & dry.
·Do not use abrasive cleaner.
Wood Furniture Care

5/17
NEED HELP? for help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm est)
PARTS DESCRIPTION
HARDWARE DESCRIPTION
PRE-ASSEMBLY INFORMATION
MODEL # AXCHUN-08-GR
PRE-ASSEMBLY INFORMATION
MODEL # AXCHUN-08-GR
A B C
1 2
4 5
3
TOP
QTY 1
SHELF
QTY 2
LEG
QTY 4
ALLEN KEY BOLT
M 6 X 15 mm
QTY 12
WASHER
Ø 17 / Ø 8 X 1.5 mm
QTY 12
ALLEN KEY
QTY 1
SHELF SUPPORT
QTY 8
FURNITURE TIP OVER RESTRAINT
QTY 2 SET
QTY - 4
M 4 X 20 mm - QTY - 4
M 4 X 30 mm - QTY - 4

6/17
COMPONENTS - KEY DIAGRAM
MODEL # AXCHUN08-GR
B
A
C

7/17
ASSEMBLY
MODEL # AXCHUN08-GR
STEP 1 C
A
CC
A
12
3
C
1. Attach Legs C to Top A with Allen key Bolts 1 and Washers 2 .
2. Use Allen key 3 to tighten.

8/17
ASSEMBLY
MODEL # AXCHUN08-GR
Note: Levelers on bottom of legs can be adjusted if floor is uneven.
STEP 2

9/17
ASSEMBLY
MODEL # AXCHUN08-GR
I
II
STEP 3
FIXING ADJUSTABLE HINGES
Tighten the Screw marked ll to fasten hinge. The door may need to
be adjusted so that all the spaces between the door and the unit sides are equal.
to adjust, follow instructions:
1. Side adjustment 4 mm
To move the door towards the side panel, loosen screw I and tighten screw II .
To move the door away from the side panel, loosen screw II and tighten screw I .
2. Depth adjustment 4 mm
Loosen screw II ( just one turn ), adjust door to desired position, re-tighten screw.
3. Height adjustment
Loosen screw III , adjust door to desired position, re-tighten screw.
III

10/17
ASSEMBLY
MODEL # AXCHUN08-GR
STEP 4
4
A
CB
A
1. Insert four shelf supports 4 into the holes of both cabinets of top A .
2. Insert the shelf B on top of the supports 4 of in each cabinet of top A .

11/17
FURNITURE TIP OVER RESTRAINT ASSEMBLY
5
5
Serious or fatal crushing injuries can occur from furniture tip-over.
if the furniture tip over restraint kit is not in the box, please contact our customer
service department in order to obtain another kit before using the furniture.
WARNING
NOTE: The screwdriver is not
included in the hardware pack

12/17
1. Attach one of the mounting brackets securely to the back edge of
the furniture. Use the shorter screw.
2. Determine where furniture is to be placed and mark location on
the wall for mounting bracket screw hole approximately 2 inches
below the bracket mounted to the furniture.
3. Drill a 3/16 inch hole in the wall. Press the plastic anchor into the
hole and gently tap until the flange on the anchor is against the
wall surface.
4. Position the bracket over the anchor and use the longer screw to
securely attach the bracket to the wall
5. Place the furniture so the back edge is in line with the bracket on
the wall.
6. Lace an end of the nylon zip-tie strap down through each bracket.
bring both ends together and slid the smooth side upright through
the square-shaped end pull through to create the "locked"
position.
7. Check to make sure the strap is securely laced and locked to the
brackets.
·DO NOT place heavy objects in top drawers
·DO NOT let children climb or hang on drawers, doors or shelves
Furniture Tip Over Restraint Instructions:
FURNITURE TIP OVER RESTRAINT ASSEMBLY

NEED HELP? for help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm est)
HARDWARE DESCRIPTION
DOOR REPLACEMENT (IF REQUIRED)
6
PHILLIPS SCREW ROUND HEAD
M 3.5 X 15 mm
QTY 16
PARTS DESCRIPTION
DLDR
LEFT DOOR
QTY 1
RIGHT DOOR
QTY 1
13/17

DL
DR
DL
6
14/17
DOOR REPLACEMENT (IF REQUIRED)
1. Using a screwdriver to remove Phillips Screws Round Head 6 from the hinges.
2. Remove the Doors DL or DR from the TV frame.
STEP 5

DR
15/17
DOOR REPLACEMENT (IF REQUIRED)
1. Attach hinges on Doors DL or DR to Sides of the TV frame, using Phillips
Screws 6 into pre-drilled holes on Sides of the TV frame.
2. Using Phillips screwdriver to tighten Screws 6 into pre-drilled holes.
6
STEP 6
DL

II
STEP 7
FIXING ADJUSTABLE HINGES
Tighten the screw marked II to fasten hinge. the door may need to
be adjusted so that all the spaces between the door and the unit sides are equal.
to adjust, follow instructions:
1. Side adjustment 4 mm
To move the door towards the side panel, loosen screw I and tighten screw II .
To move the door away from the side panel, loosen screw II and tighten screw I .
2. Depth adjustment 4 mm
Loosen screw II ( just one turn ), adjust door to desired position, re-tighten screw.
3. Height adjustment
Loosen screw 6 , adjust door to desired position, re-tighten screw.
16/17
DOOR REPLACEMENT (IF REQUIRED)
6
I

17/17
WARRANTY
TM
TM
SI
M P HOMETM
Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max
product. These products have been made to demanding, high-quality
standards and are guaranteed for domestic use against manufacturing faults
for a period of 12 months from the date of purchase. This warranty does not
affect your statutory rights.
In case of any malfunction of your product (failure, missing parts, etc.) please
contact us at our toll free service line at 1-866-518-0120 ext. 262 from 9 am
to 4 pm, Monday to Friday, Eastern Standard Time or by email at
[email protected]
We reserve the right to repair or replace the defective product, at its
discretion.
This product is guaranteed for 12 months if used for normal purposes.
Any warranty is invalid if the product has been overloaded or subject to
neglect, improper use or an attempted repair by other than an authorized
agent. Heavy-duty or daily professional/commercial usage are not
guaranteed.
Due to continuous product improvement, we reserve the right to change the
product specifications without prior notice.