Simpli Home WyndenHall brooklyn + max AXCWSH16-RUS User manual

WARM SHAKER / NORFOLK / LEXINGTON
TV MEDIA STAND
MODEL # AXCWSH16-RUS
1/23
SI
M
P
I
I
HOME
L I F E B Y D E S I G N
®

2/23
Questions, problems, assembly help, missing parts?
No need to return the product, we will gladly help and ship your
replacement parts free of charge
Please call Customer Service at 1-866-518-0120 ext. 262
Monday to Friday between 9 am – 4 pm EST
or go to
www.simpli-home.com/parts request
In order to assist you in a timely manner, please have the following information ready:
Model # _______________________ Part Number or Letter_______________________
Purchased at ___________________Date of Purchase ___________________________
If you wish to return the product, please contact the retailer where the
product was purchased.
SI
M
P
I
I
HOME
L I F E B Y D E S I G N
®

3/23
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
SAFETY INFORMATION
CAUTION: Injuries and damage can occur from furniture tip over if product is not
properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided
with the product. Consult our assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the
furniture.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required. Hardware
package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.

4/23
CARE and MAINTENANCE
Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative
humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls,
and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally
along different grain directions. As humidity changes, the components of wooden objects are
continually pushing and pulling against each other. This pressure often results in parts of furniture
no longer fitting together closely or becoming distorted or breaking from their own internal
stresses.
The response to relative humidity changes begins with determining the annual average RH for
your particular space. Then try to keep the RH in the space where your furniture is as close to that
average as possible, generally within about 10% up or down. De-humidify in the summer and
humidify in the winter.
Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern heating
systems, which can drive down interior RH in the winter, almost invariably cause problems for
furniture. To counteract their effect, you can either modify the RH by keeping furniture containing
spaces cooler in the winter or most importantly, have a good working humidifier for your home. A
humidistat automatically works to balance the humidity in your home so it is constant. Dry indoor
air can suck enough moisture from its surroundings to do permanent damage to wood, causing it
to crack or split.
Remember, that not all woods are created equal. Two factors that help determine how rapidly a
wood will lose moisture are pore size and surface hardness. A piece made from a dense and hard
wood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished piece
while pieces with veneer finishes are not only stronger, but lose moisture more slowly than other
finishes.
To help protect your wood furniture, take these steps:
• Use a humidifier, preferably one with an automatic control system that can sense the humidity
level and adjust itself accordingly. Don't over-humidify; that can damage wood by causing it to
expand and contract.
• Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp.
• If you can avoid it, don't put furniture near heating vents. If you must, keep the piece 3 to 4
inches away from the wall, giving the heat and air space to circulate.
• Dust with soft dry cloth.
• Do not use liquid or aerosol products.
• To avoid marking, do not place rubber on surface (foot pads, etc.)
• For soil build-up, wipe with damp cloth & dry.
• Do not use abrasive cleaners.
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION
PARTS DESCRIPTION
5/23
A
TOP
QTY 1
LEFT SIDE
QTY 1
BL
RIGHT SIDE
QTY 1
BR
CENTRE SHELF
QTY 1
C
BOTTOM SUPPORT
QTY 1
LEFT DIVIDER
QTY 1
DEL
ER
RIGHT DIVIDER
QTY 1
F
DOOR (L&R Same)
QTY 2
G
CENTRE DRAWER GLIDE
QTY 1
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front /
Avant
Front /
Avant
Front
/ Avant
Front
/ Avant
Front
/ Avant
MODEL # AXCWSH16-RUS

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION
PARTS DESCRIPTION
6/23
HI
SHELF CABINET
QTY 2
SHELF
QTY 2
J
BACK PANEL
QTY 1
KLL
BACK PANEL
QTY 1
LEFT BACK PANEL
QTY 1
DRAWER FRONT
QTY 2
MNL
LEFT DRAWER SIDE
QTY 2
NR
RIGHT DRAWER SIDE
QTY 2
O
DRAWER BACK
QTY 2
P
DRAWER BOTTOM
QTY 2
KR
RIGHT BACK PANEL
QTY 1
Warning Label
MODEL # AXCWSH16-RUS

PRE-ASSEMBLY INFORMATION
HARDWARE DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
7/23
123
Required -
Flathead screwdriver
Phillips screwdriver
Rubber mallet
Not Included
456
789
10 11 12
23
ALLEN KEY
QTY 1
CAM LOCK PIN
CAM LOCK
QTY 16 SETS
ALLEN KEY SCREW
M6 X 30 mm
QTY 32
PHILLIPS SCREW
M4 X 15 mm
QTY 24
PHILLIPS SCREW
M3 X 15 mm
QTY 8
MAGNET AND PLATE
QTY 2 SETS
SHELF SUPPORT
QTY 24
HANDLE
M4 X 25 mm
QTY 4 SETS
PHILLIPS SCREW
ROUND HEAD
M4 X 15 mm
QTY 31
WOOD DOWEL
Ø8 X 30 mm
QTY 4
ADJUSTABLE HINGE
QTY 4 SETS
FURNITURE TIP OVER RESTRAINT
QTY 1 SET
a. M4 X 25 - QTY 2
( )1 is extra
b. M4 X 15 - QTY 1
c. M4 X 25 - QTY 1
MODEL # AXCWSH16-RUS

COMPONENTS – KEY DIAGRAM
8/23
O
P
NL
NR
M
A
KR
J
LBLF
EL
ER
KL
H
I
I
C
D
H
BR
F
Front
/
Avant
Front / Avant
Front
/
Avant
Front
/
Avant
Front / Avant
Front
/
Avant
Front / Avant
Front / Avant
G
Front
/ Avant
Front / Avant
MODEL # AXCWSH16-RUS

ASSEMBLY
STEP 1
1. Slide Drawer Bottom P firmly into slots on Drawer Sides NL , NR and
Drawer Front M .
STEP 2
1. Attach 4 Cam Lock Pins 2 to back of Drawer Front M .
2. Align and insert Cam Lock Pins into guide holes on Drawer Sides NL , NR .
3. Insert 2 Cam Lock 2 into guide holes on each Drawer Side NL , NR .
4. Use flathead screwdriver to secure Cam Locks.
M
2
NR
NL
M
NR
NL
P
9/23
MODEL # AXCWSH16-RUS

ASSEMBLY
STEP 3
STEP 4
1. Use Phillips Screwdriver to attach Handle 8 to Drawer Front M .
1. Align Drawer Back O with Drawer Bottom P and press firmly into slot .
2. Attach back using 2 Allen Key Screws 1 through guide holes on each side.
3. Use Allen Key 3 to tighten. Do not over-tighten.
NOTE: The screwdriver is not
included in the hardware pack.
M
P
NR
NL
O
1
3
8
M
Repeat Step 1-4 for the second drawer.
10/23
MODEL # AXCWSH16-RUS

ASSEMBLY
STEP 5
11/23
1. Attach three Cam Lock Pins 2 to Right Side BR using pre-drilled holes.
2. Align and insert Cam Lock Pins on Right Side BR into guide holes on Bottom Shelf C .
3. Place three Cam Locks 2 into guide holes in Bottom Shelf C .
4. Use a flathead screwdriver to tighten Cam Locks into Pins.
2
1. Attach Dividers EL , ER to Bottom Shelf C using four Allen Key Screws 1 through
guide holes.
2. Use Allen Key 3 to tighten. Do not over-tighten.
STEP 6
C
BR
3
C
ER
EL
1
Front
/
Avant
Front /
Avant
Front
/
Avant
Front
/
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front
/ Avant
MODEL # AXCWSH16-RUS

ASSEMBLY
12/23
STEP 7
1. Attach two Cam Lock Pins 2 to bottom of Bottom Shelf C using guide holes in centre.
2. Align and insert pins into Centre Drawer Glide G .
3. Insert two Cam Locks 2 into guide holes on Centre Drawer Glide G .
4. Use a flathead screwdriver to tighten Cam Locks into Pins.
1. To attach Left Side BL to Bottom Shelf C , repeat steps 1 - 4 in Step 6.
STEP 8
C
BL
2
C
GG2
BR
Front
/ Avant
Front
/
Avant
Front
/ Avant
Front
/
Avant
Front
/
Avant
Front
/
Avant
Front
/
Avant
Front /
Avant
Front
/ Avant
Front
/ Avant
Front
/
Avant
Front
/ Avant
MODEL # AXCWSH16-RUS

ASSEMBLY
STEP 9
13/23
1. Attach Bottom Support D to Sides BL , BR and Centre Drawer Glide G using Allen Key
Screws 1 through guide holes.
2. Use Allen Key 3 to tighten. Do not over-tighten.
D
G
BL
BR
1
3
1
3
Front
/
Avant
Front
/ Avant
Front / Avant
Front / Avant
Front
/ Avant
Front
/
Avant
Front / Avant
Front /
Avant
MODEL # AXCWSH16-RUS

ASSEMBLY
STEP 10
14/23
1. Insert two Dowels 11 into top corners of each Side BL , BR .
2. Use rubber mallet to tap Dowels 11 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Align drilled holes on bottom corners of Top A with Dowels 11 in Sides BL , BR .
4. Insert Dowels into top.
5. Use Allen Key Screws 1 attach Top A to Sides BL , BR and to Dividers EL , ER .
A
BR
BL
EL
ER
1
3
11
1
3
Front /
Avant
Front /
Avant
Front / Avant
Front / Avant
Front
/ Avant
Front
/ Avant
MODEL # AXCWSH16-RUS

ASSEMBLY
STEP 11
15/23
1. Attach Back Panels J , KL , KR , L to back of TV Stand using Phillips Round Head
Screws 9 through guide holes from panels.
2. Use Phillips screwdriver to tighten screws.
Note:
The back of the cabinet frame does not have pre-drilled holes to attach the back panels.
Front /
Avant
Front
/
Avant
AWarning Label
KL
J
L
KR
9
MODEL # AXCWSH16-RUS

ASSEMBLY
STEP 12
16/23
F
12
4
12
4
1. Attach Adjustable Hinges 12 to Doors F using Phillips Screws 4 into pre-drilled holes
on Doors F .
2. Attach Adjustable Hinges on Doors F to Sides BL , BR using Phillips Screws 4
into pre-drilled holes on Sides BL , BR .
3. Use a Phillips screwdriver to tighten screws. Do not over-tighten.
F
F
A
BR
BL
Front
/
Avant
Front
/ Avant
Front /
Avant
MODEL # AXCWSH16-RUS

ASSEMBLY
17/23
IMPORTANT NOTE:
II
I
4
Tighten the Screw marked II to fasten hinge. The door may need to be adjusted so
that all the spaces between the door and the unit sides are equal. To adjust, follow
instructions:
1. Side adjustment 4 mm
To move the door towards the side panel, loosen screw I and tighten screw II .
To move the door away from the side panel, loosen screw II and tighten screw I .
2. Depth adjustment 4 mm
Loosen screw II ( just one turn ), adjust door to desired position, re-tighten screw .
3. Height adjustment
Loosen screw 4 , adjust door to desired position, re-tighten screw .
MODEL # AXCWSH16-RUS

ASSEMBLY
STEP 13
18/23
1. Attach Magnet Plates 6 to bottom corner of Doors F using Phillips Screws 5
into pre-drilled holes on Doors F .
2. Attach Magnets 6 using Phillips Screws 5 into pre-drilled holes on Centre Shelf C .
3. Use a Phillips screwdriver to attach Handles 8 to Doors F .
A
BR
BL
EL
F
F
C
8
5
6
5
6
ER
MODEL # AXCWSH16-RUS

ASSEMBLY
STEP 14
19/23
1. Use Shelf Supports 7 for each Shelf H or I in desired location.
2. Two Shelf Supports 7 may be used on back top of each Shelf H or I as a tipping
restraint.
shelf support
anti - tipping
shelf level 1
shelf level 2
shelf level 3
7
7
HI
I
MODEL # AXCWSH16-RUS

ASSEMBLY
STEP 15
20/23
MODEL # AXCWSH16-RUS
1. Insert assembled drawers into glides on assembled TV