Simpli Home WyndenHall Brooklyn+max ARTISAN User manual

ARTISAN / HOLDEN / STRATFORD
72 INCH WIDE TV MEDIA STAND
MODEL # AXCRART72-RUS
1/25
SI
M
P
I
I
HOME
L I F E B Y D E S I G N

2/25
SI
M
P
I
I
HOME
L I F E B Y D E S I G N
Questions, problems, assembly help, missing parts?
No need to return the product, we will gladly help and ship your
replacement parts free of charge
Please call Customer Service at 1-866-518-0120 ext. 262
Monday to Friday between 9 am – 4 pm EST
or go to
www.simpli-home.com/parts request
In order to assist you in a timely manner, please have the following information ready:
Model # _______________________ Part Number or Letter_______________________
Purchased at ___________________Date of Purchase ___________________________
If you wish to return the product, please contact the retailer where the
product was purchased.

3/25
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
SAFETY INFORMATION
CAUTION: Injuries and damage can occur from furniture tip over if product is not
properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided
with the product. Consult our assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the
furniture.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required. Hardware
package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.

4/25
CARE and MAINTENANCE
Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative
humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls,
and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally
along different grain directions. As humidity changes, the components of wooden objects are
continually pushing and pulling against each other. This pressure often results in parts of furniture
no longer fitting together closely or becoming distorted or breaking from their own internal
stresses.
The response to relative humidity changes begins with determining the annual average RH for
your particular space. Then try to keep the RH in the space where your furniture is as close to that
average as possible, generally within about 10% up or down. De-humidify in the summer and
humidify in the winter.
Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern heating
systems, which can drive down interior RH in the winter, almost invariably cause problems for
furniture. To counteract their effect, you can either modify the RH by keeping furniture containing
spaces cooler in the winter or most importantly, have a good working humidifier for your home. A
humidistat automatically works to balance the humidity in your home so it is constant. Dry indoor
air can suck enough moisture from its surroundings to do permanent damage to wood, causing it
to crack or split.
Remember, that not all woods are created equal. Two factors that help determine how rapidly a
wood will lose moisture are pore size and surface hardness. A piece made from a dense and hard
wood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished piece
while pieces with veneer finishes are not only stronger, but lose moisture more slowly than other
finishes.
To help protect your wood furniture, take these steps:
• Use a humidifier, preferably one with an automatic control system that can sense the humidity
level and adjust itself accordingly. Don't over-humidify; that can damage wood by causing it to
expand and contract.
• Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp.
• If you can avoid it, don't put furniture near heating vents. If you must, keep the piece 3 to 4
inches away from the wall, giving the heat and air space to circulate.
• Dust with soft dry cloth.
• Do not use liquid or aerosol products.
• To avoid marking, do not place rubber on surface (foot pads, etc.)
• For soil build-up, wipe with damp cloth & dry.
• Do not use abrasive cleaners.
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION
PARTS DESCRIPTION
MODEL # AXCRART72-RUS
5/25
A
TOP
QTY 1
TOP SHELF
QTY 1
BOTTOM SHELF
QTY 1
B C
LEFT BACK PANEL
QTY 1
DL
RIGHT BACK PANEL
QTY 1
DRD1
TOP BACK PANEL
QTY 1
D2
BOTTOM BACK PANEL
QTY 1
LEFT SIDE
QTY 1
EL
RIGHT SIDE
QTY 1
ER
Front
/ Avant
Front
/ Avant
Front
/ Avant
Front / Avant
Warning Label

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION
PARTS DESCRIPTION
MODEL # AXCRART72-RUS
6/25
LEFT DIVIDER
QTY 1
FL
RIGHT DIVIDER
QTY 1
FR
LEFT MIDDLE DIVIDER
QTY 1
GL
RIGHT MIDDLE DIVIDER
QTY 1
GR
TOP DIVIDER
QTY 1
H
CENTER SHELF
QTY 1
I
SHELF
QTY 2
J
LARGE DOOR (L&R Same)
QTY 2
K
SMALL DOOR (L&R Same)
QTY 2
L
Front /
Avant
Front
/ Avant
Front / Avant
Front / Avant
Front / Avant

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION
PARTS DESCRIPTION
MODEL # AXCRART72-RUS
7/25
M
BOTTOM SUPPORT LEG
QTY 2
N O
DRAWER FRONT
QTY 1
FLIP DOWN DOOR
QTY 1
PL
LEFT DRAWER SIDE
QTY 1
PRQ
RIGHT DRAWER SIDE
QTY 1
DRAWER BACK
QTY 1
R
DRAWER BOTTOM
QTY 1

1
PRE-ASSEMBLY INFORMATION
HARDWARE DESCRIPTION
243
56
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
8
7
9
13
10 12
11
ALLEN KEY SCREW
M6 X 30 mm
QTY 43
PHILLIPS SCREW
ROUND HEAD
M4 X 15 mm
QTY 39
PHILLIPS SCREW
M3 X 12 mm
QTY 24
HANDLE
M4 X 30mm
QTY 6 SETS
PHILLIPS SCREW
M4 X 30 mm
QTY 8
PHILLIPS SCREW
M4 X 15 mm
QTY 6
ALLEN KEY
QTY 1
SHELF SUPPORT
QTY 12
LATCH
QTY 1 SET
CAM LOCK PIN
CAM LOCK
QTY 19 SETS
MAGNET AND PLATE
QTY 4 SETS
PHILLIPS SCREW
M3 X 15 mm
QTY 20
8/25
Required -
Flathead screwdriver
Phillips screwdriver
Not Included
MODEL # AXCRART72-RUS
FURNITURE TIP OVER RESTRAINT
QTY 1 SET
a. M4 X 25 - QTY 2
( )1 is extra
b. M4 X 15 - QTY 1
c. M4 X 25 - QTY 1

Front
/ Avant
Front
/
Avant
Front /
Avant
Front
/ Avant
Front /
Avant
Front
/ Avant
Front /
Avant
DL
A
COMPONENTS – KEY DIAGRAM MODEL # AXCRART72-RUS
9/25
DR
D1
D2
EL
ER
FL
FR
GLGR
PL
PR
H
CJ
K
L
J
L
K
I
N
B
M
M
Q
O
R

ASSEMBLY
1. Slide Drawer Boom R firmly into slots on Drawer Sides PL , PR and
Drawer Front O .
STEP 1
STEP 2
10/25
MODEL # AXCRART72-RUS
PL
PR
O
2
O
PR
PL
R
PR
PL
O
2
1. Aach 4 Cam Lock Pins 2 into pre-drilled holes at the back of Drawer Front O .
2. Align Cam Lock Pins with guide holes and aach Drawer Sides PL , PR .
3. Insert 2 Cam Locks 2 into guide holes on each Drawer Side PL , PR .
4. Use flathead screwdriver to secure Cam Locks.

ASSEMBLY
1. Align Drawer Back Q with Drawer Boom R and press firmly into slot .
2. Aach back using 2 Allen Key Screws 1 through guide holes on each Side PL , PR .
3. Use Allen Key 3 to ghten screws. Do not over-ghten.
1. Use Phillips screwdriver to aach Handle 4 to Drawer Front O .
STEP 4
11/25
NOTE: The screwdriver is not
included in the hardware pack.
MODEL # AXCRART72-RUS
PL
PR
Q
O
R
1
3
O
4
STEP 3

ASSEMBLY
1. Aach Centre Shelf I to each Middle Divider GL , GR using 3 Allen Key Screws 1 .
2. Use Allen Key 3 to ghten screws. Do not over-ghten.
12/25
MODEL # AXCRART72-RUS
Front
/ Avant
Front /
Avant
Front /
Avant
I
GL
GR
1
3
STEP 5

ASSEMBLY
1. Aach 6 Cam Lock Pins 2 into pre-drilled holes at the boom of Top Shelf C .
2. Align Cam Lock Pins with guide holes on Middle Divider GL , GR .
3. Insert 3 Cam Lock 2 into guide holes on each Middle Divider GL , GR .
4. Use flathead screwdriver to secure Cam Lock .
5. Aach Top Divider H to Top Shelf C using 3 Allen Key Screws 1 .
13/25
NOTE: The screwdriver is not
included in the hardware pack.
MODEL # AXCRART72-RUS
Front /
Avant
Front
/ Avant
Front
/
Avant
I
GL
GR
C
H
2
2
2
2
1
2
2
1
3
STEP 6

ASSEMBLY
STEP 7
1. Aach Top Shelf C to each Divider FL , FR using 3 Allen Key Screws 1 .
2. Use Allen Key 3 to ghten screws. Do not over-ghten.
14/25
MODEL # AXCRART72-RUS
Front /
Avant
Front /
Avant
Front / Avant
Front / Avant
Front
/ Avant
Front /
Avant
STEP 8
1. Aach Boom Shelf B to Dividers FL , FR & GL , GR using 12 Allen Key Screws 1
(3 Allen Key Screws / each Divider ).
2. Use Allen Key 3 to ghten screws. Do not over-ghten.
1
1
1
3
1
1
1
11
1
3
FL
FR
C
FL
FR
GL
Front
/
Avant
Front
/ Avant
Front / Avant
Front /
Avant
Front / Avant
1
GR
B

ASSEMBLY
15/25
MODEL # AXCRART72-RUS
STEP 9
NOTE: The screwdriver is not
included in the hardware pack.
B
EL
ER
M
M
8
1. Aach 3 Cam Lock Pins 2 into pre-drilled holes on each Side EL , ER .
2. Align Cam Lock Pins with guide holes and aach Boom Shelf B .
3. Insert 6 Cam Locks 2 into guide holes on Boom Shelf B .
4. Use flathead screwdriver to secure Cam Locks.
5. Aach 2 Boom Support Legs M align with pre-drilled holes at back of Boom Shelf B .
Use to ghten 8 Screws 8 . Phillips screwdriver Phillips
Front /
Avant
Front
/
Avant
2
2
2

Front
/
Avant
Front
/ Avant
ASSEMBLY
16/25
MODEL # AXCRART72-RUS
STEP 10
A
EL
ER
FR
FL
H
ER
EL
A
FR
H
1. Aach 3 Cam Lock Pins 2 into pre-drilled holes at the boom of Top A ( at center ) .
2. Align Cam Lock Pins with guide holes on Top Divider H .
3. Insert 3 Cam Locks 2 into guide holes on Top Divider H .
4. Use flathead screwdriver to secure Cam Locks.
5. Aach the Boom of Top A to 2 Sides EL , ER and 2 Dividers FL , FR using 12 Allen Key
Screws 1 ( 3 Allen Key Screws / each part )
1
3
3
1
1
2
2
2
Front
/
Avant
Front
/ Avant
FL

ASSEMBLY
17/25
MODEL # AXCRART72-RUS
STEP 11
NOTE: The screwdriver is not
included in the hardware pack.
1. Using Phillips screws Round Head 5 to aach Back Panels DL , DR , D1 , D2 through
guild holes from Back Panels to the back of Cabinet.
2. Use Phillips screwdriver to ghten screws.
Front /
Avant
A
D1
D2
DL
DR
5
Warning Label

ASSEMBLY
18/25
MODEL # AXCRART72-RUS
STEP 12
1. Attach hinges on Large Doors K to Sides EL , ER and attach hinges on Small Doors L to
Dividers FL , FR using Phillips Screws 9 into pre-drill holes:
- Using Phillips screwdriver to attach Screws 9 at middle hole of hinges for both top &
bottom hinges.
- Adjust the door to ensure they are aligned straight & square with bottom shelf & side.
- Using Phillips screwdriver to tighten the rest of screws 9 into pre-drill holes ( top & bottom
holes on hinges).
2. Attach hinges on Center Shelf I to Flip Down Door N using Phillips Screws 12
into pre-drilled holes.
First Step Last Step ( after adjust the door )
9
9
9
12
B
L
K
ELFL
A
L
K
ER
FR
I
N

ASSEMBLY
STEP 13
19/25
MODEL # AXCRART72-RUS
1. Aach 4 Magnet Plates 6 to boom corner of Doors K and Doors L using Phillips
Screws 10 into pre-drilled holes.
2. Aach 4 Magnets 6 using Phillips Screws 10 into pre-drilled holes on Boom Shelf B .
3. Aach Latch 11 to Divider GR and Flip Down Door N using Screw 10 into
pre-drilled holes.
10
11 10
10
6
10
6
GR
B
L
K
K
L
10
6
L
B
N
K
GR
L
K

ASSEMBLY
STEP 14
20/25
MODEL # AXCRART72-RUS
1. Use a Phillips screwdriver to aach Handles 4 to Doors K , L & Flip Down Door N
through guide holes.
4
4
N
K
K
L
L
4