Simplified MFG EX1L User manual

EX1L
HDMI 2.0b (18Gbps) 4K HDR/
DolbyVision® 120m Extender Set
VER 1.0

Thank you for purchasing this Device
The Simplified MFG EX1L was designed to provide years of reliable service.
At Simplified MFG we want your experience with this device to be the best
possible and are committed to helping achieve that experience. Please
read and keep this manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged
by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend
the life of your equipment.
Table of Contents
1. Introduction....................................................................................................1
2. Features............................................................................................................1
3. Package Contents......................................................................................... 2
4. Specifications................................................................................................. 2
5. Operation Controls and Functions.......................................................... 4
5.1 Transmitter Panel..……………………………………………………4
5.2 Receiver Panel………………………………………………………….5
5.3 IR Pin Definition……………………………………………………….6
5.4 IR System Diagram……………………………………………………7
6. Application Example.................................................................................... 8
7. Warranty and Contact Information……………………………………9
**Please use 568b protocol when terminating the category
cable.

1/ 9
1. Introduction
This EX1L 18Gbps HDMI Extender can extend an HDR/Dolby Vision™
audio/video, RS-232, bi-directional IR, and the distance is up to 394ft /120m
and a 1080p signal up to 150m (492ft) between transmitter and receiver via a
single CAT cable. It supports resolution up to 4K2K@60Hz 4:4:4, 18Gbps
and HDCP 2.2. Additional features include a HDMI loop out and audio de-
embedder port on the TX, and audio de-embedding at the RX device via an
optical SPDIF and 3.5mm audio breakout on the RX device and is powered
by a single power supply on one end (can be powered from either end). A
12V IR kit is supplied with the extender set as well.
2. Features
HDMI 2.0, HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
Supports 18Gbps bandwidth
120m (394ft) distance at HDMI 2.0b 4K/UHD
150m (492ft) distance at 1080p
HDR 8/10/10+ and Dolby Vision™ support
WCG (Wide Color Gamut) and HLG (Hybrid Log Gamma) support
3.5mm Mini-jack stereo audio breakout on TX
HDMI Loop Out on TX
Optical SPDIF and 3.5mm Mini-jack stereo audio breakout on RX
2-Way 12V IR (kit included)
Powers from a single end (either RX or TX)

2/ 9
3. Package Contents
Qty
Item
1
18Gbps HDMI over HDBaseT Extender (Transmitter)
1
18Gbps HDMI over HDBaseT Extender (Receiver)
2
IR Blaster cable (1.5 meters)
2
20~60KHz IR Receiver cable (1.5 meters)
4
Mounting Ears
2
3-pin Phoenix connectors
1
24V/1A Locking Power adapter
1
User Manual
4. Specifications
Technical
HDMI Compliance
HDMI 2.0b
HDCP Compliance
HDCP 2.2 / HDCP 1.4
Video Bandwidth
18Gbps
Video Resolution
4K2K 50/60Hz 4:4:4/4:2:2/4:2:0
4K2K 30Hz 4:4:4
1080p, 1080i, 720p, 720i, 480p, 480i
All HDMI 3D TV formats
All PC resolutions including 1920 x 1200
Color Space
RGB / YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Color Depth
8/10/12-bit (1080P60Hz, 4K30Hz, 4K60Hz YCbCr
4:2:2/4:2:0)
8-bit (4K60Hz 4:4:4 )
HDMI Audio Formats
LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital,
Dolby TrueHD, Dolby Digital Plus(DD+), DTS-
ES, DTS HD Master, DTS HD-HRA, DTS-X
L/R Audio Formats
PCM 2.0
SPDIF Audio Formats
LPCM 2.0, LPCM5.1, Dolbly Digital 2/5.1
ESD Protection
Human body model — ±8kV (Air-gap discharge)
& ±4kV (Contact discharge)

3/ 9
Connections
Transmitter
Inputs: 1x HDMI Type A [19-pin female]
1x Service [Mini-USB, Update port]
Outputs: 1x HDMI Type A [19-pin female]
1 x Audio L/R stereo [3.5mm Mini-jack]
1x HDBT Out [RJ45, 8-pin female] Control:
1x IR IN [3.5mm Stereo Mini-jack]
1x IR Out [3.5mm Stereo Mini-jack]
1x RS-232 [Phoenix jack]
Receiver
Inputs: 1x HDBT In [RJ45, 8-pin female]
1x Service [Mini-USB, Update port]
Outputs: 1x HDMI Type A [19-pin female]
1x Audio out [3.5mm Stereo Mini-jack]
1 x Audio out [Optical SPDIF]
Control: 1x IR IN [3.5mm Stereo Mini-jack]
1x IR OUT [3.5mm Stereo Mini-jack]
1x RS-232 [Phoenix jack]
Mechanical
Housing
Metal Enclosure
Color
Black
Dimensions
Transmitter / Receiver:
140mm [W] x 65mm [D] x 18mm [H]
Weight
Transmitter: 160g, Receiver: 155g
Power Supply
Input: AC 100 - 240V 50/60Hz
Output: DC 24V/1A (Locking connector)
Power Consumption
9.36 W
Operating Temp
32 - 104°F / 0 - 40°C
Storage Temperature
-4 - 140°F / -20 - 60°C
Relative Humidity
20 - 90% RH (no condensation)
Resolution / Distance
4K2K
394ft / 120M
1080P
492ft / 150M
Resolution/
Cable Lngth.
4K60 -
Ft / Meters
4K30 -
Ft / Meters
1080P60 -
Ft / Meters
HDMI IN / OUT
10ft / 3M
30ft / 10M
50ft / 15M
The use of “Premium High-Speed HDMI” cable is highly recommended.

4/ 9
5. Operation Controls and Functions
5.1
Transmitter Panel
No.
Name
Function Description
1
Power LED
Red LED will be illuminated when the transmitter has power.
2
SERVICE port
Firmware update port.
3
DC 24V
DC 24V/1A power supply input port.
Note that the extender supports PoC function, it means that either
transmitter or receiver is powered on by 24V/1A power supply, the
other one doesn’t need power supply.
4
HDBT OUT
RJ45 connector for connecting the HDBT In port of receiver
with a CAT6/6a cable.
5
Connection
Signal Indicator
LED (Green)
▪ Illuminated: Transmitter and Receiver have a
good connection status.
▪ Flashing: Transmitter and Receiver are in poorconnection
status.
▪ Dark: Transmitter and Receiver are not connected.
6
Data Signal
Indicator LED
(Orange)
▪ Illuminated: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
7
AUDIO OUT
3.5mm stereo connector for analog audio output.
8
HDMI OUT
HDMI loop output for display.
9
HDMI IN
HDMI source input port.
10
IR IN
IR input port for receiving IR from IR-RX or Control system
11
IR OUT
IR output port for control of source device(s). Thi IR output
signal is from the IR IN port of receiver.
1 2
3 7 8 9 10 125 4 6
SERVICE
AUDIO OUT HDMI IN IR INHDMI OUT IR OUT
HDBT OUT
RS-232
TX RX
DC 24V
11

5/ 9
3-pin Phoenix connector for RS-232 command transmission.
The RS-232 command will pass-through from transmitter to
receiver or receiver to transmitter.
5.2 Receiver Panel
No.
Name
Function Description
1
Power LED
Red LED will be on when the receiver is powered on.
2
SERVICE port
Firmware update port.
3
DC 24V
DC 24V/1A power supply input port.
Note that the extender supports PoC function, it means that either
transmitter or receiver is powered on by 24V/1A power supply, the
other one doesn’t need power supply.
4
HDBT IN
RJ45 connector for connecting the HDBT OUT port of
transmitter with a CAT6/6a cable.
5
Connection
Signal LED
(Green)
▪ Illuminated: Transmitter and Receiver are in good
connection status.
▪ Flashing: Transmitter and Receiver are in poor connection
status.
▪ Dark: Transmitter and Receiver are not connected.
6
Data Signal
LED
(Orange)
▪ Illuminated: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
7
SPDIF OUT
SPDIF connector for optical audio output.
8
AUDIO OUT
3.5mm stereo connector for analog audio output.
RS-232
1 2
3 7 8 9 10
SERVICE
HDBT IN
SPDIF OUT AUDIO OUT HDMI OUT IR IN IR OUT RS-232
TX RX
DC 24V
5 4 6 1211

6/ 9
IR IN
IR port input for receiving the signal of IR remote.
IR OUT
IR port output for control of display device. This IR output
signal is from IR IN port of transmitter.
RS-232
3-pin pluggable connector for RS-232 command
transmission. The RS-232 command will pass-through from
transmitter to receiver or receiver to transmitter.
5.3IR Pin Definition
IR Receiver and Blaster pin’s definition is as below:
IR RECEIVER
IR BLASTER
Power 12V
+
-
IR RECEIVER
IR BLASTER

7/ 9
5.4 IR System Diagram
Note that IR remote sends signal distance for 0~5 meters/0~8 meters, and angle is
plus-minus 45 degrees / vertical direction.
AUDIO OUT HDMI IN IR INHDMI OUT IR OUT
HDBT OUT
RS-232
TX RX
DC 24V
HDBT IN
SPDIF OUT AUDIO OUT HDMI OUT IR IN IR OUT RS-232
TX RX
DC 24V
LAN LAN
TV
DVD
DVD remote
TV remote
CAT 6/6a cable
IR Receiver cable
IR Blaster cable
ReceiverTransmitter
IR Blaster cable
IR Receiver cable

8/ 9
6. Application Example
Transmitter
AUDIO OUT HDMI IN IR INHDMI OUT IR OUT
HDBT OUT
RS-232
TX RX
DC 24V
HDBT IN
SPDIF OUT AUDIO OUT HDMI OUT IR IN IR OUT RS-232
TX RX
DC 24V
IR Receiver
Power Supply
IR Blaster
LAN
LAN
UHDTV
IR Receiver
IR Blaster
Receiver
CAT 6/6a cable
DVD or Blu-ray Player
UHDTV
2.0 Speakers
HDMI Matrix with
RS-232 function
PC
Audio Amplifier
2.0 Speakers

9/ 9
7. Warranty and Contact Information
Should you feel that this product does not function adequately due to
defects in materials or workmanship, we (referred to as “the warrantor”)
will, for the length of the period indicated below (starting from the
original date of the purchase) either a) repair the product with new or
refurbished parts. Or b) Replace the product with new or refurbished
product. All Simplified MFG products are covered by a 3-year PARTS
and LABOR warranty. During this period there will be no charge for
unit repair, replacement of unit components or replacement of the
product if deemed necessary. The decision to repair or replace is made
by the warrantor. The purchaser must mail in the product during the
warranty period. This limited warranty only covers the product
purchased as new and is extended to the original purchaser only. It is
non-transferrable to subsequent owners, even during the warranty
period. A purchase receipt or other proof of purchase date is required
for the limited warranty service.
Sales and Tech Support
P. 833-HDMI-411 (833-436-4411)
E. [email protected]
Simplified MFG • 550 W Baseline Rd Ste 102-121 • Mesa AZ 85210

How to extract audio
from HDMI
Sound BarSound Bar
HDMI Cable or Extender
Stereo or up to 5.1 Audio AUDEX1 HDMI
Optical or Stereo
1. Audio Extraction with no conversion. AUDEX1
extracts the audio in the format sent up to 5.1
2. Audio Extraction with down conversion. DAC1
extracts the audio from any format and down
converts it to stereo
HDMI Cable or Extender
with any audio format DAC1 HDMI
Sound BarSound Bar
Optical or Stereo
3. Audio Extraction with no conversion via audio
breakout on RX of EX1L HDMI Extender
Category cable EX1L RX
EX1L RX
HDMI HDMI
Sound BarSound Bar
Optical or Stereo
4. Fully uncompressed audio extraction from display
back to AVR via eARC (including Atmos)
Category cable
full uncompressed
audio returns from
display
EXeARC1 RX
EXeARC1 TX
HDMI HDMI
5. Several sources, no AVR audio extraction at
display to soundbar via SW4:1
Blu-RayBlu-Ray
STBSTB
SW4:1
Up to 4 inputs
Sound BarSound Bar
HDMI
HDMI
HDMI
Optical or Stereo
Note: SW4:1 does not convert audio
Can be switched automatically or with IR remote
also supports ARC from display